DESCRIPTION : can be made based on request for other specification with MOQ required. - GENERAL SPECIFICATION : Refer to JIS H 5302 : 2006 Chemical Composition (mass %) Cu : 1.5 to 3.5 ; Si : 9.6 to 12.0 ; Mg : 0.3 max. ; Zn : 1.0 max. ; Fe : 1.3 max. ; Mn : 0.5 max. ; Cr : - ; Ni : 0.5 max. ; Sn : 0.2 max. ; Pb : 0.2 max. ; Ti : 0.30 max. ; Al : Remainder - PACKAGING & QUANTITY : 20 FT Container with 25 Bale of ingots each approx. 1 Tonne
Coconut Fatty Acid Distillate is the side product obtained during the refining process of crude coconut oil. It is a reddish brown liquid at room temperature and is mainly used in soap manufacturing industries.
The main reason why Fatty Acid is used more than petrochemicals to produce these products, namely: Fatty Acid is produced from renewable sources while the raw materials from petrochemicals are taken from non-renewable sources, this will certainly be more environmentally friendly and safer.
Products ValueLam 4500HC-4 45" Hot/Cold 4 Roller Roll Laminator at Harisefendi provide a 100% money back guarantee and 100% safe, Because Harisefendi� the best of the best.We sell some of the best brands such as MIMAKI, ROLAND, MUTOH, SUMMA, SPECTRA, RICOH, SEIKO, U-MARQ, CANON, EPSON, HP, GRAPHTEC, XAAR, etc. And purchase
Product Description
Four roller laminators are designed for encapsulating documents, posters, etc.
The newly designed ValueLam 4500 HC-4 is the ideal value-priced Laminating/Mounting Machine for large-format imaging output up to 44" wide. Throughput performance is improved over that of the original ValueLam 4500 HC by way of an additional set of pull rollers and forced air cooling fans for faster throughput.
The ValueLam 4500 HC-4 laminator also features hot and cold lamination with dual heated rollers, release liner take up, 1/2" mounting capability and extra take up mandrel for automatic roll up of laminated prints. The ValueLam 4500 HC-4 runs all types of both cold and heat-set pressure sensitive laminates and adhesives and encapsulating with the true thermal laminates. Also featuring a "heat assist" mode (top roller heat only), the ValueLam 4500HC-4 laminator delivers the perfect heat level to increase initial adhesion and clarity of slow curing pressure sensitive films lessening the time to receive finished output suitable for display. The ValueLam 4500HC-4 is made in the USA.
Usage
Commercial
Width
45"
Min/Max Film Thickness
1.5 - 10 mil
Core Size
3"
Laminating Type
Hot/Cold
Heating Method
Heated Rollers
Heat Roller Diameter
3"
Warm Up Time
25-30 Min
Reverse Switch
Yes
Speed (Feet per Minute)
0-10 fpm
Adjustable Temperature
Yes - Independent for top and bottom
Control Panel
LED Readout
Ready Light
No
Safety Auto Shutoff
No
Safety Shield
1
Feed Table Safety Switch
No
Key Lock
No
Mounting Capability
1/2"
Electrical Requirements
20 amps, 120 VAC, 60Hz
Machine Dimensions
56"L x 21"H x 30"D
Weight
236 lbs
Shipping Weight
474 lbs
Net Weight
236
Country Of Origin
USA
Products Xyron 6300 63 inch Cold Roll Laminator at Harisefendi provide a 100% money back guarantee and 100% safe, Because Harisefendi the best of the best.We sell some of the best brands such as MIMAKI, ROLAND, MUTOH, SUMMA, SPECTRA, RICOH, SEIKO, U-MARQ, CANON, EPSON, HP, GRAPHTEC, XAAR, etc. And purchas
Product Description
The Xyron 6300 is a 63" cold wide format roll laminator. This highly effective and efficient laminator allows you to both apply laminate, adhesive or both without the use of heat. The XM6300 delivers consistently even, edge-to-edge application of adhesive, and is environmentally safe. Simply feed your material into the machine, push a button and trim. No waiting, no smell and no mess.
Accommodates documents up to 63" in width
Even, edge to edge adhesive application
Environmentally safe
Fixed speed of 13fpm
Emergency stop switch
Foot pedal operation
Color coded film loading
Mounting capability of 3/16"
Stand included
Compatible with a variety of Xyron Laminating Film [Call for details]
Machine dimensions: 79.8â?? x 21.7â?? x 54.7â??
Power Requirements: 110V
One Year Mfr Warranty
Usage
Heavy Duty
Width
63"
Min/Max Film Thickness
2.7mil
Core Size
3" (Uses Xyron Film Only)
Laminating Type
Cold
Heating Method
NA
Reverse Switch
No
Ready Light
No
Safety Auto Shutoff
No
Feed Table Safety Switch
No
Mounting Capability
Yes
Mounting Thickness in mil
3/16"
Electrical Requirements
None
Machine Dimensions
79.8â?? x 21.7â?? x 54.7â??
Weight
324 lbs
Shipping Weight
421 lbs
Net Weight
324
Free Shipping
Yes
Warranty
1 Year
Coated Duplex Board
CD 250gsm
CD 270gsm
CD 310gsm
CD 350gsm
CD 400gsm
Deckle trim 105 inch and 125 inch
All the sizes have to meet our above deckle trim.
This product is available for size 2000ml & 3000 ml.
Moq of this product is 150 boxes,but for delivery, minimum 1x20ft container,can combine with our another products
This product available in 500,650,750&1000ml. Price is different according to its size.
Moq of this product is 150 boxes but for delivery moq is 1x20ft container,can combine with our another products
This plastic Bag indicated by there are square sealed in plastic. This model usually used by Diapers and Tissue Companies.
We can serve customized model as customer request. Printing model can be up to 8 colors.
Minimum order of this order is 500 kg, but for export delivery, moq is 1x20ft, can combine with our another products
This plastic Bag indicated by there are only one seal (top or bottom) in plastic. This model common used in many application, such as sugar wrap, rice wrap, food wrap, tissue wrap, etc.
We can serve customized model as customer request.
Minimum order of this order is 500 kg, but for export delivery, moq is 1x20ft, can combine with our another products
This plastic Bag indicated by there are oval hole (for handle) in plastic. This model usually used for gifts bag plastic, bakery, etc.
We can serve customized model as customer request.
Minimum order of this order is 500 kg, but for export delivery, moq is 1x20ft, can combine with our another products
This plastic Bag indicated by there are permanent seal tape in plastic. Model is like envelope. This model usually used by Courier Services, online shopping, etc.
We can serve customized model as customer request. We can print up to 8 colors
Minimum order of this order is 500 kg, but for export delivery, moq is 1x20ft, can combine with our another products
This plastic Bag indicated by there are side seal in plastic. This model usually used by tissue and diapers company and FMCG Companies
We can serve customized model as customer request. We can print up to 8 colors
Minimum order of this order is 500 kg, but for export delivery, moq is 1x20ft, can combine with our another products
This plastic Bag indicated by there is plastic handle in plastic bag. This model usually used by goodie bag, food etc.
We can serve customized model as customer request. We can print up to 8 colors
Minimum order of this order is 500 kg, but for export delivery, moq is 1x20ft, can combine with our another products
This plastic Bag indicated by there are 2 small holes in plastic. This model usually used by bakery (for white bread packaging), mask packaging, etc.
We can serve customized model as customer request. We can print up to 8 colors
Minimum order of this order is 500 kg, but for export delivery, moq is 1x20ft, can combine with our another products
