New Panasonic Original Printhead UH-HA820 for DGI FabriJet Specifications Technology: Piezo Electric Max. Resolution: 600 dpi Nominal Drop Size: 11pl Adj. Range for Droplet Size: 3 to 14pl Max. Frequency: 30 kHz Ink Compatibility: Aqueous-based inks This Panasonic UH-HA820 is suitable for DGI FabriJet FT-1604X & FT-3204X printers. This is the original Panasonic part (number UH-HA820).
Roland Original BN-20/FH740/RE-640/SOLJET PRO4 RF-640 Printhead (DX7) -6701409010 To be used with: Roland VS-420/VS-640/VS-640i/VS-540i/VS-300i, Roland FH740, Roland BN-20, Roland XR-640, Roland SOLJET PRO4 XF-640, Roland RA-640, Roland RE-640, Roland RF-640, Remarks: Original Part no.: 6701409010
To be used with: Roland SOLJET ProII SJ-540,SJ-645EX,SJ-655EX,SJ-740,SJ-745EX,SJ-1045EX, SJ-1000,SC-540,SC-545EX, Roland VersaCAMM SP-300V, SP-540V, VP-300, VP-300I, VP-540I, Roland SOLJET PRO III XJ-640, XJ-740, XC-540, XC-540W, XC-545MT, Roland VersaArt RS-640 mimaki jv3(jv3-130, JV3-130sp, JV3-160, JV3-160sp, JV3-250, JV3-250sp etc.) Mutoh RH-II(Falcon2), RH-3, Spitfire 65, Spitfire 90, Blizzard 65, Blizzard 90
To be used with: Roland VS-420/VS-640/VS-640i/VS-540i/VS-300i, Roland RF-640, Roland FH-740, Roland RA-640, Roland RE-640, Roland BN-20, Roland XR-640, Roland SOLJET PRO4 XF-640 and Roland VersaCAMM Print & Cut VS-540/540I Part no.: 6701409010 Remarks: Original
To be used with: Roland RA-640, Roland RE-640, Roland RF-640, Roland VS-420/VS-640//VS-640i/VS-540i/VS-300i, Roland FH740, Roland BN-20, Roland XR-640, Roland SOLJET PRO4 XF-640 and Roland VersaCAMM Print & Cut VS-540/540I Part no.: 6701409010 Remarks: Original
New Ricoh Original Gen5 7PL-35PL [Short Cable] Printhead Manufacturer: Ricoh Printer compatibility: Agfa :Jeti Mira MG2716 S/HS/Jeti Mira MG2732 S/HS/Jeti Tauro H2500/Jeti Titan S/Jeti Titan HS CET Color Q5-250/Q5-500/Q5-1000/Q5-250h/Q5-500h/Q5-1000h Docan 1212 UV/M6/M8/M10/R3300/FR3210/FRT3116/R5200 Akad NovaJet UV M6 Handtop HT2512UV-D FR8/HT1600UV HR4/HT2500UV HR8/HT3200UV HR8/HT3200UV HG12/HT3116UV FR8 TwinJet RH-3262/RH-3264/RH-1862/RH-1864/UV-F2500, MTMC TS - 1325G/MC - F2513G/MC - F2030G Wit-Color UVIP 5R 3304/UVIP 5B 2513/UVIP 5B 3020/UVIP 5R 3303/UVIP B5100-2513 Vivex CS 3300, Mtutech MT-RH1510R, TitanJet 3302-G5N, Mantis MTS-UV1513RI, AOJet APRO 250FR Caiyi UV2030/UV2013/UV2015/UV2018/UV2513/UV2515/UV2518/UV2520 Rose Maxcan RGP-MC45-G5/RGP-MC48-G5, Flora PP2512UV-G/PP1612UV-G/LJ 320G/LJ 180G Indask F1212 UV/F2518 UV/F2030 UV/FR2510 UV/FRT3215 UV/FRT3225/R3300 UV/R5200 UV LavaPrint 4896-HRC/78118-HRC, AmicaSystems FG2512, Mehta Rasterjet RJ2512/Rasterjet RJ2512H/Rasterjet RJ2030/Sprinter Turecolor TC-F1212/Turecolor TC-F2512/Turecolor TC-FR2512/Turecolor TC-F2030/Turecolor TC-FG2030/POWER PRO 3200/POWER 4S
This GEN3-E1 printhead is a robust, metallic construction offering resolutions up to 360 dpi for fast speed and high quality printing. The Ricoh / Hitachi GEN3-E1 (MH1801/1901) printhead is suitable for a range of Teckwin printers. There are 96 channels for a drop volume of 30 or 65 pl. Specifications Active nozzles: 96 Piezo type: D33 stacked PZT Print swathe width: 17.2 mm Nozzle pitch: 0.6809 mm Drop velocity: 8 m/s Printhead weight: 60 g Dimensions: 120 x 35 x 8 mm Life: 100 billion actuations per nozzle Drop volume: 30 or 65 pl Firing frequency: up to 20 kHz
New D.gen Original Head FB-740 Inkjet (1000005689) This FB-740 Head, Inkjet is suitable for d.gen Artrix GT & Teleios GT printers. This is the original d.gen part (number 1000005689).
To be used with: Icontek: TW-3306HC, TW-3308HC,TW-3306HA, TW-1806A, TW-3306HD, TW-3308HD, TW-3308HZ, M1, M3 SID: XCS PLUS 320-8H, XCS 320-8H, XES 250, XES 320, XH250 Crstaljet: S1806SPT510_35PL, S3306IISPT510_35PL , F3308IISPT510_35PL, S4306SPT510_35PL, F4308SPT510_35PL, S6306IISPT510_35PL, F6308IISPT510_35PL Infiniti: FY-3208HA, FY-3206HA, FY-3208HF, FY-3206HF, FY-3208H, FY-3206H, FY-3208R, FY-3206R, FY-3208G, FY-3204G Phoaeton: UD-3206E, UD-3208E, UD-3206G, UD-3208G, UD-3208GF, UD-3206GF, UD-3208H Roland: AJ-1000, AJ-740 VUTEK: QS3200,QS3200R Remarks: Original Description: This Seiko SPT510/35pl printhead and the latest type SPT510-35PL printhead with new IC driver perform the same for most printers. But for INFINITI / CHALLENGER FY-3208H printers (Serial number before 32026212974), produced before January 5, 2011 and with USB board, users should choose this SPT510-35PL printhead(PRH-SPT-002-E).
Original Seiko Colorpainter 64s/100s Printhead To be used with: Seiko: Colorpainter 64s, Colorpainter 100s HP: designjet 9000s, Designjet 10000s OCE: CS 6060, CS 6100 DGI: ST1806 Remarks: Original
Original Seiko Spt508GS/12pl Printhead To be used with: Solvent printers For WER, Infiniti, Pheaton, Acrylistal, Icontek Remarks: Original
Original Seiko Spt255/12pl Printhead To be used with: SID XQ210, Crstaljet S1806SPT255_12PL Remarks: Original
To be used with: Crystaljet 3000,4000,4000 II, 6000II, 9000series large format printer, which are produced after January 5, 2011 by INFINITI / CHALLENGER. ZHONGYE ZY-6800,ZY-5300,ZY-3400,ZY-3200,ZY-2500,ZY-2000,ZY-FB Series large format printers with Seiko spt510/35PL Remarks: Original Description: This is latest type SPT510-35PL print head with new IC driver chip produced by Seiko. Both new and old IC driver chips perform the same
Mimaki JV22/TX2/JV4 Water Based DX4 Printhead Description: Epson DX4 original, water-based print head suitable for Roland, Mutoh and Mimaki water-based printers. The DX4 water-based print head is the most popular print head used for water-based wide format printing applications. This is the original DX4 water-based printhead, delivered in a sealed Roland original package. This print head is compatible with a wide range of printers as specified in compatibility. Remarks: Original Part number: 228054740# To be used with: Mimaki jv4, MimakiJV22, MimakiTX2 Roland HiFiJet Pro II FJ-540, Roland HiFiJet Pro II FJ-740 Mutoh RJ-8000
New MIMAKI Original TS34/JV34 - Printhead
This Mimaki JV33/JV5 printhead is suitable for the Mimaki solvent printer series. The Mimaki JV33/JV5 printhead has a native resolution of 1440dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line. Product Specifications Technology: Micro-Piezo Native resolution: 1440 dpi Min. Droplet Size: 1.5 pico litre Max. Droplet Size: 21 pico litre Tot. Amount of Nozzles: 1440 (8 lines x 180 nozzles) Firing Frequency: 8 kHz Ink Compatibility: eco-solvent and mild solvent The Mimaki JV33/JV5 printhead is either used in 4-colours or 6-colours and has a minimum, variable droplet size of 1.5 pico litre (max. droplet size is 21 pico litre). The typical firing frequency for this print head is 8 kHz.
Original Epson Pro 3800/3850 Printhead-F177000 To be used with: Epson Pro 3800/3850 Remarks: Original
Original Epson Stylus R4910/4900 Printhead-F198000 To be used with: Epson Stylus Photo R4910, Epson Stylus Photo 4900 Remarks: Original Part number: F198000
DX7 Print Head Printhead F189010 For EPSON B310 B510 B318 B518 B300 B500 B308 B508 Printer Head
Original Epson T5070/T7000/T7080 Printhead-FA10000 To be used with: EPSON SC T3070/T3000/T3080/T3050/T5000/T5080/T5070/T7000/T7080 Printers Remarks: Original
