Price US$1,299.00 This printhead is suitable for VUTEk PressVu UV 200/600 printers. This is the original VUTEk part (number AA90646). Specifications - Technology: Piezo Electric - Max. Resolution: Up to 900dpi - Cal. Droplet Size: 28 pico litre - Adj. Range for Droplet Size: 25 - 30 pico litre - Tot. Amount of Nozzles: 256 - Nozzle Spacing: 254 microns (0.010 in.) - Nozzle Diameter: 36 microns - Firing Frequency: 20 kHz - Operating Temperature: up to 90�°C - Ink Compatibility: Organic solvents, UV curables, Aqueous VUTEk PressVu UV 200/600
Price US$1,075.0 This GS-508 (12 picoliters) print head is suitable for Vutek GS printers. This is the original Vutek print head. This product carries a manufacturer warranty. Manufacturer: Vutek Printer compatibility: Vutek GS2000 / GS3200 / GS5000 DP part number : PPHSE5082
Price US$1,099.00 Original Vutek GS Jetpacks Print Head 45083572 45093679 45095093 Printer compatibility: VUTEk GS2000 / GS2000 Pro / GS2000LX / GS2000LX Pro / GS3200 / GS3200 Pro / GS3250 / GS3250 Pro / GS3250LX / GS3250LX Pro / GS3250r / GS5000r / QS2 Pro / QS3 Pro DP part number : PPHVU12817 This ASM, Jetpack Print Head Grey Scale Platinum is suitable for VUTEk GS-series printers. This printhead includes the heating element and the smoothing electronic board. The jetpack also includes a set of two Jet Clamps (part number 45083572 / 45093679 / 45095093) and screws to install and aligne the printheads on the Vutek printer. This is the original VUTEk part (number replacing numbers 45083572 / 45093679 / 45095093 / 45093679). This is the latest upgraded head that comes with the connector. Technical Specifications - Drop size: 12pl - Grey Scale levels: 7 - Nozzles: 508 nozzles - Firing Frequency: 18 kHz - Active Print Width: 72 mm - Damper: integrated, quick dry break connector
Price US$999.00 PressVu 200 (PV200) Printhead - Jetpack - AA90646 - Fits EFI/VUTEk Printers VUTEk Part #: AA90646 Prime Printer Service Part #: PPS-AA90646 This Print Head/Jetpack fits the following models: PressVu 200 (PV200)
Price US$1,300.00 Toshiba CE4W1 Printhead Unique technology of jetting multiple drops onto a single dot creates wide range of grayscale with minimum 6 pl to maximum 90 pl (15 drops) per dot. Higher driving frequency (especially at small drops) CA4 realizes 28KHz at 1drop (6pL) mode, which is twice as fast as the existing CA3 using the same interface. Printer Compatibility: TOSHIBA Printer Remarks: Original
Price US$599.00 The Toshiba CE4M printhead has high nozzle density with 636 channels and a high driving frequency (especially at small drops). The Toshiba CE4M printhead offers a wide range of drop volume, from 5 to 35 picoliters, with excellent dot placement accuracy and stable jetting with water circulation thermal control. The Toshiba CE4M printhead is compatible with UV curable and oil-based pigment inks. Specifications Printhead Name: Toshiba CE4M Active nozzles: 636 Print width: 2,11 (53.6 mm) Grayscale levels: 16 Native resolution: 150dpi Max. resolution: 300 dpi Printhead weight (dry): 148 g Ink Compatibility: Oil-based pigment ink and UV curable pigment ink Drop volume: 5 35 pl Typical firing frequency: 2.8 28 kHz Dimensions (WxDxH): 85 x 70 x 23 mm
Price US$429.00 Description: This Toshiba TEC CA4W on-demand piezo electric inkjet print head is designed for industrial applications with high print quality. Unlike conventional binary print heads, this grayscale print head technology is capable of jetting multiple drops within one dot allowing for an image to have 16 levels of grey, since each dot is created through a minimum of 6 pico litre to a maximum of 90 pico litre of ink. The Toshiba TEC CA4W is suitable for UV curable and Oil based inks, has 2 ink inlet ports (which can be easily removed to be replaced with a 1 ink inlet assembly) and a chassis which provides a built-in water channel and complete sealing designed for easy temperature control. This is Toshiba original printhead. It carries a one year warranty. The jig tools used to calibrate and fit this head are available as related products. To be used with: Mimaki UJF-605CII, Oce Arizona 300 GT / Arizona 350 GT / Arizona 350 XT / Arizona 360 GT / Arizona 360 XT / Arizona 318 GL, Fujifilm Acuity Advance LT / Acuity Advance HD2545 / Acuity Advance HD2545W / Acuity Advance HD2545 X2 / Acuity Advance HD2565 / Acuity Advance HD2565 X2, EFI Rastek H650 / Rastek H700 Specifications : Technology: On Demand Piezo Electric Max. Resolution: 1200 dpi Droplet Size: 6 to 90 pico litre Maximum Grayscale Levels: 16 Tot. Amount of Nozzles: 318 Nozzle Spacing: 169 microns Firing Frequency: 28 kHz (1 drop) - 2.8 kHz (15 drops) Driving Voltage: 14 - 31 V Ink Compatibility: Oil Based pigment ink and uv ink
Price US$559.00 Description: This Toshiba TEC CA3W on-demand piezo electric inkjet print head is designed for industrial applications with high print quality. Unlike conventional binary print heads, this grayscale print head technology is capable of jetting multiple drops within one dot allowing for an image to have 8 levels of grey, since each dot is created through a minimum of 6 pico litre to a maximum of 42 pico litre of ink. The Toshiba TEC CA3W is suitable for UV curable and Oil based inks, has 2 ink inlet ports (which can be easily removed to be replaced with a 1 ink inlet assembly) and a chassis which provides a built-in water channel and complete sealing designed for easy temperature control. To be used with: Mimaki UJF-605RII / UJF-605C, Oc�© Arizona 200 GT / Arizona 250 GT, Fujifilm Acuity Advance HD2504 Specifications Technology: On Demand Piezo Electric Max. Resolution: 1200 dpi Droplet Size: 6 to 42 pico litre Maximum Grayscale Levels: 8 Tot. Amount of Nozzles: 318 Nozzle Spacing: 169 microns Firing Frequency: 13.8 kHz (1 drop) - 2.8 kHz (15 drops) Driving Voltage: 14 - 28 V Ink Compatibility: Oil Based pigment ink and uv ink
Price US$3,899.0 This new generation Kyocera KJ4B-YH is designed is designed for high-speed printing of water-based inks. It is a 600dpi one color printhead with a maximum drive frequency of 40kHz. It delivers high quality with a small drop volume of 5pl at 75 m/min by making use of 2,656 nozzles arranged across 108.25 mm wide print swathe with 0.042mm pitch, resulting in 30.000 drops per second. The Kyocera KJ4B-YH is equipped with internal filters that eliminate foreign objects in ink and an internal heater that adjusts the impact of external temperatures. Its unique ink channel design provides a stable ink supply. Specifications Ink Type: Aqueous Ink Dimensions: 200 Ã?? 30 Ã?? 60.9mm Dry Weight: 438g Total Nozzles: 2.656 Nozzle Pitch: 0.042mm Standard Resolution: 600 x 600 dpi Print Width: 108.25mm Max. Drive Frequency: 40kHz Drop Volume: 5, 7, 12 pl Max. Sprint Speed: 100m/min Optimum Ink viscosity: 5.0 - 6.0 mPa*s
Price US$3,299.0 This new generation Kyocera KJ4B-QA is designed is designed for high-speed printing of water-based inks. It is a 600dpi one color printhead with a maximum drive frequency of 30kHz. It delivers high quality with a small drop volume of 5pl at 75 m/min by making use of 2,656 nozzles arranged across 108.25 mm wide print swathe with 0.042mm pitch, resulting in 30.000 drops per second. The Kyocera KJ4B-QA is equipped with internal filters that eliminate foreign objects in ink and an internal heater that adjusts the impact of external temperatures. It's a unique ink channel design provides a stable ink supply. Specifications Ink Type: Aqueous Ink Dimensions: 200 Ã?? 25 Ã?? 59.3mm Dry Weight: 420g Total Nozzles: 2.656 Nozzle Pitch: 0.042mm Standard Resolution: 600 x 600 dpi Print Width: 108.25mm Max. Drive Frequency: 30kHz Drop Volume: 5, 7, 12 and 18pl Max. Sprint Speed: 75m/min Optimum Ink viscosity: 5.0 - 6.0 mPa*s
Price US$4,875.00 This new generation Kyocera KJ4A-RH is designed for high speed single-pass and multi-pass applications with printers using UV ink. It is a 600dpi one colour printhead with a maximum drive frequency of 30kHz. It delivers high quality with a small drop volume of 5pl at 70 m/min by making use of 2,656 nozzles arranged across 108 mm wide print swathe with 0.042mm pitch, resulting in 30.000 drops per second. The Kyocera KJ4A-RH is equipped with internal filters that eliminate foreign objects in ink and an internal heater that adjusts the impact of external temperatures. Itâ??s unique ink channel design provides a stable ink supply. Specifications Ink Type: UV Ink Dimensions: 200 �? 30 �? 68.9mm Dry Weight: 420g Total Nozzles:2.656 Nozzle Pitch: 0.042mm Standard Resolution: 600 x 600dpi Print Width: 108.25mm Max. Drive Frequency:30kHz Drop Volume: 5, 7, 12 and 18pl Max. Sprint Speed:70m/min Input Voltage:3.3 V for logic / 29 V for driving Temperature Control:Reservoir heater and thermistor are equipped
This new generation Kyocera KJ4B-0300 is designed for high-speed single-pass applications with printers using aqueous ink. It is a 300dpi two colours printhead with a maximum drive frequency of 30kHz. It delivers high quality with a small drop volume of 5pl at 120 m/min by making use of 2,656 nozzles arranged across 112 mm wide print swathe. Specifications Ink Type: Aqueous Ink Dimensions: 200 Ã?? 36 Ã?? 68.5mm Dry Weight: 540g Total Nozzles:2.656 Standard Resolution: 300 x 300dpi Print Width: 112mm Max. Drive Frequency: 30kHz Drop Volume: 5, 7, 12 and 18pl Max. Sprint Speed: 120m/min Typical ink viscosity: 5.0-6.0 mPa
Price US$4,400.00 This new generation Kyocera KJ4A-TA is designed for high-speed single-pass applications with printers using UV ink. It is a 600dpi two colors printhead with a maximum drive frequency of 20kHz. It delivers high quality with a small drop volume of 3pl at 158 m/min by making use of 2,656 nozzles arranged across 108.25 mm wide print swathe. Kyocera Inkjet Printhead Specifications Ink Type: UV ink Dimensions: 200 25 59.3 mm Dry Weight: 540g Total Nozzles: 2.656 (2x 1328) Standard Resolution: 600 x 600 dpi Print Width: 108.25 mm Max. Drive Frequency: 20kHz Drop Volume: 3,6 & 13PL Max. Sprint Speed: 50 m/min Typical ink viscosity: 6.0-6.5 mPa
Price US$3,499.0 This new generation Kyocera KJ4A-0300 is designed for high speed single-pass applications with printers using aqueous ink. It is a 300dpi two colours printhead with a maximum drive frequency of 30kHz. It delivers high quality with a small drop volume of 4pl at 158 m/min by making use of 2,656 nozzles arranged across 112.35 mm wide print swathe. Specifications Ink Type: UV ink Dimensions: 200 Ã?? 36 Ã?? 61.4mm Dry Weight: 540g Total Nozzles: 2.656 (2x 1328) Standard Resolution: 300 x 300dpi Print Width: 112.35mm Max. Drive Frequency: 30kHz Drop Volume: 4, 6, 10 and 14pl Max. Sprint Speed: 158m/min Typical ink viscosity: 7.0-7.5 mPa
Price US$539.00 The Konica Minolta KM512iLNB-30 print head is a robust print head , shear mode, piezo on-demand print head that is usable in binary mode only. This Konica Minolta print head has 512 nozzles with a droplet size of 30 picolitre and a native resolution of 360 dpi. It is compatible with solvent inks. This is Konica original print head and it includes the necessary waveform information. It carries a product warranty. Specifications - Technology: On-Demand Piezo Electric - Drive System: Indepenent drive system - Native Resolution: 360 dpi - Cal. Droplet Size: 30 pico litre - Tot. Amount of Nozzles: 512 (256 nozzles per line) - Print Width: 72.2 mm - Firing Frequency: 30,4 kHz - Ink Compatibility: Solvent - Heater: not integrated
Price US$699.00 Konica 3668H 6PL UV Printhead To be used with: Konica Remarks: Original
Price US$240.00 The Konica 256 / 42pl Printhead is an entry level, compact, shear mode, piezo on-demand print head that is usable in binary mode only. It is suitable for both wide format and industrial applications.The Konica 256 / 42pl Printhead has 256 nozzles with a droplet size of 42pl and a nozzle resolution of 180 dpi. It is compatible with oil based and solvent inks. This is Konica original print head and it includes the Head ID and the necessary waveform information. To be used with: Aestrik InWear S3304K2 / InWear S3308K2 Megagraphic Extreme Compact Solvent XK 320 LIYU PJ3204 / LIYU PJ3208 Remarks: Original Specification: Drive Mode: Piezo Drop-On-Demand Nozzle Resolution: 180 dpi Nozzle Number: 256 nozzles Drop Volume: 42pl Ink Compatibility: Oil Based and Solvent Heater: not integrated
Price US$235.00 The Konica 256/14pl Printhead is an entry level, compact, shear mode, piezo on-demand print head that is usable in binary mode only. It is suitable for both wide format and industrial applications. The Konica 256/14pl Printhead has 256 nozzles with a droplet size of 14pl and a nozzle resolution of 180 dpi. It is compatible with oil based and solvent inks. This printhead is not compatible with HP 8000 printers. This is Konica original print head and it includes the Head ID and the necessary waveform information. To be used with: Human X-JetB 1808 Remarks: Original Specification: Drive Mode: Piezo Drop-On-Demand Nozzle Resolution: 180 dpi Nozzle Number: 256 nozzles Drop Volume: 14pl Ink Compatibility: Oil Based and Solvent Heater: not integrated
Price US$1,200.00 Product Description KONICA 1204i MAE 13PL Printhead Remarks: Original
Price US$1,095.00 Product Description Konica 1024iSAE-C 6PL Water-based Printhead To be used with: Konica Remarks: Original
