Zeolites are widely used in industry as catalysts, for the preparation of advanced materials and in nuclear reprocessing. They are used to extract nitrogen from air to increase oxygen content for both industrial and medical purposes.
Module data sheet - module type una-620a Dimensions Membrane area (m2) 50 Module length (mm) 2160 Module diameter (mm) 165 Nominal pore size (μm) 0.1 Operating conditions Max. Operating temp. (deg. C) 40 Ph range (long term operation) 1 - 10 Ph range (short term for cleaning) 1 – 13 Max. Transmembrane pressure (bar) 3.0 Max. Inlet pressure (bar) 3.0 Materials Membrane polyvinylidenefluoride (pvdf) Housing abs resin Potting material polyurethane resin Antifreeze/bacteriostat 40% calcium chloride solution
A wide range of applications for dt technology Applications for pall filtration equipment fall into the following categories: • the remediation and softening of groundwater, particularly at hazardous waste sites. • the desalination of seawater on boardships, at resorts - or offshore oil/gas production platforms. • the filtering and cleaning of leachate at solid waste landfills. • the filtering and softening of surface water • the treatment of industrial wastes to permit safe discharge and water reuse. • the treatment of cooling tower boiler blowdown. Open channel technology • less susceptible to fouling and scaling • modules are easy to clean • suitable for silt density index (sdi) up to 5/15 Easy maintenance • module can be opened • module and membranes can be investigated • single membranes can be tested for best cleaning procedure • single membranes can be investigated at lab (edx, microscope) Features of pall dt reverse osmosis systems • modular expandable design with one or multiple stages • recovery rates achievable by dt modules with staged ro pressure (base 18ms/cm) • high pressure units maximize permeate yield (recovery rate) • mobile containerized units or in situ installation options • no mechanical chemical pre-treatment necessary • small footprint • installation complementary to existing treatment plants • ‘plug & play’ installation with short start-up period • capacity ranges from 1 – 25 m3/h per line • short or long-term rental opportunities • economic module exchange • worldwide service Pressure range (bar): 75 90 120 160 Recovery rate (%): 80 85 90 93-95
V wire screen Water well screen
Our range of Reverse Osmosis Water Filter System are powder coated skid mounted type systems, which are easy to install and operate. These dolphin reverse osmosis system comes with a flow capacity of 250-5000 LPH. Moreover, our range can be customized as per the specific requirement of our clients. Filtration : 5 Stages Flow Rates : 12-15 LPH Size : 12"x 12"x 16" (L x W x H) Booster Pump - Kemflow 48 w R. O. Membrane - Flimtec - DOW U.S.A. 75 GPD.0.0001 Micron Storage Capacity: 9 Ltrs. Automation: Yes
We are offering sewage treatment plant to our clients. Designed under the guidelines of astute experts, this plant is accredited at schools where water treatment is highly accredited for water drainage and sewage. Perfectly designed in compliance with the international quality standards, this plant is manufactured by making use of qualitative raw material that is sourced from valued vendors.
Our organization is offering car wash water recycling plant to our clients. It can makes the reuse of waste water of car washing. It employs the advanced water recycling technology with two stage filtration, disc filtration and uf membrane filtration and back washed automatically.
We can offer a huge gamut of effluent treatment plant to our clients. These plants are used to purify water in the most efficient manner to offer clean & safe drinking water to people. Our wide range is furnished with the finest quality components.
SuperKlean's 300 series stainless steel hot &cold water mixing unit was specifically designed for thoroughly blending hot and cold water instantly by mixing supplied hot water with cold water to achieve required temperature output. The unit uses "Y" style body mechanics with lift check valves and ball joint unions for superior flexibility during installation. SuperKlean's inlet center lines have the same dimensions almost of our competitors' units. Our units come with a mounting plate for easy behind the unit cleanup, hose rack for easy user access to the hose, and an optional temperature gauge for accurate temperature readings at outlet. Principal Parts, Material & Rating Inlet / Outlet Diameter: 3/4" Mixer Body: 300 Series Stainless Steel Globe Style Valves: 300 Series Stainless Steel Check Valves: 300 Series Stainless Steel Temperature Gauge: (optional) Stainless Steel Maximum Pressure: 150 PSI Maximum Temperature: 200°F (93°C) Weight: 20 Lbs. Model #Description: 3600M-S-T300 series stainless steel, hot & cold water wall mounted mixer-hose station. Includes globe valves, check valves, hose rack, mounting bracket, and adjustable angle temperature gauge 3600M-S300 series stainless steel, hot & cold water wall mounted mixer-hose station. Includes globe valves, check valves, hose rack, and mounting bracket.
SuperKlean is proud to introduce the most innovative steam and cold water mixing unit specifically designed to provide safe and efficient means of clean up by producing hot water instantly and economically with little or no maintenance. The DURAMIX 8000 unit operates under a wide range of steam and water pressures without changing internal components. In fact, it is one of the only steam and cold water mixing units in the industry with the ability to operate with as little as 30 PSI of water pressure. Its strategic dual output design, one at the bottom for a hose and nozzle and one at the top for hard pipe installation, provides the user with the ability to supply two individual terminals with their own hot water supply. For maximum efficiency, the second outlet can be used to feed a secondary source where hot water is needed after the primary outlet has been shut off. This feature drastically reduces energy producing costs, which is good for the bottom line, as the unit is capable of producing hot water for wash down as well as providing a secondary source of hot water for other uses 24 hours per day, 7 days per week. Our unique internal design does not allow live steam to penetrate. If water pressure fails, the Duramix 8000 will automatically close the steam poppet and not allow live steam to pass through our mixing unit, thus making this unit the safest in the market. Principal Parts & Materials Inlet / Outlet Diameter: 3/4" NPT Mixer Body: Bronze Check Valves: Bronze / Stainless Steel Hose Rack: 300 Series Stainless Steel Temperature Gauge: (optional) Stainless Steel Maximum Operative Conditions Working SteamPressure(Saturated Only): 30-150 PSI Working Water Pressure: 30-150 PSI Maximum Temperature: 200°F (93°C) Maximum Pressure: 150 PSI Weight: 20 Lbs. Model # Description: 8000GM-B-T Bronze, steam & cold water wall mounted mixer-hose station. Includes globe valves, check valves, hose rack, mounting bracket, and adjustable angle temperature gauge. 8000GM-B Bronze, steam & cold water wall mounted mixer-hose station. Includes globe valves, check valves, hose rack, and mounting bracket.
SuperKlean is proud to introduce the most innovative steam and cold water mixing unit specifically designed to provide safe and efficient means of clean up by producing hot water instantly and economically with little or no maintenance. The DURAMIX 8000 unit operates under a wide range of steam and water pressures without changing internal components. In fact, it is one of the only steam and cold water mixing units in the industry with the ability to operate with as little as 30 PSI of water pressure. Its strategic dual output design, one at the bottom for a hose and nozzle and one at the top for hard pipe installation, provides the user with the ability to supply two individual terminals with their own hot water supply. For maximum efficiency, the second outlet can be used to feed a secondary source where hot water is needed after the primary outlet has been shut off. This feature drastically reduces energy producing costs, which is good for the bottom line, as the unit is capable of producing hot water for wash down as well as providing a secondary source of hot water for other uses 24 hours per day, 7 days per week. Our unique internal design does not allow live steam to penetrate. If water pressure fails, the Duramix 8000 will automatically close the steam poppet and not allow live steam to pass through our mixing unit, thus making this unit the safest in the market. Principal Parts &Materials Inlet 1Outlet Diameter: 3/4" NPT Mixer Body: 300 Series Stainless Steel Check Valves: 300 Series Stainless Steel Hose Rack: 300 Series Stainless Steel Temperature Gauge: (optional) Stainless Steel Recommended Operative Conditions Working Steam Pressure (Saturated Only): 30-150PSI Working Water Pressure: 30-150 PSI Maximum Temperature: 200°F (93°C) Maximum Pressure: 150 PSI Weight: 20 Lbs. Model # Description: 8000GM-S-T 300 series stainless steel, steam & cold water wall mounted mixer-hose station. Includes globe valves, check valves, hose rack, mounting bracket, and adjustable angle temperature gauge. 8000GM-S 300 series stainless steel, steam & cold water wall mounted mixer-hose station. Includes globe valves, check valves, hose rack, and mounting bracket.
SuperKlean's brass and stainless steel hose racks, made out of321 series stainless steel, are virtually corrosion resistant in most applications and environments. Its aluminum epoxy coated mounting plate was specifically designed for quick and easy installation and meets the required spacing between wall to plate and plate to units. Model #Description: 12-SS300 series stainless steel hose rack for wall mounting (includes stainless steel mounting plate, stainless steel bolts, stainless steel end fittings, an 4stainless steel anchor bolts) 12-S300 series stainless steel hose rack for wall mounting (includes stainless steel bolts, epoxy coated aluminum plate and stainless steel end fittings) 12300 series stainless steel hose rack for wall mounting (includes stainless steel bolts, epoxy coated aluminum plate and brass end fittings) 11-S300 series stainless steel hose rack for unit mounting (includes stainless steel bolts & stainless steel end fittings) 11300 series stainless steel hose rack for unit mounting (includes stainless steel bolts & brass end fittings)
AS per requirement
We are supplier of water treatment project like mineral water plant, water softner, ETP.
We provide industrial air and water pollution control services: Supply and installation of effluent treatment plant (etp), sewage treatment plant (stp), waste water treatment plant, air fumes scrubber, operation and maintenance of etp/ stp/ scrubber, modification and up-gradation of etp/ stp/ scrubber, supply and execution of hdpe/ pp/ pvc pipes fittings and accessories, anti corrosion services, frp lining, ppg lining, rubber lining, epoxy coating, industrial paintings, industrial operation and maintenance, pp frp storage tanks, pp frp chimneys, ms chimney, equipment cover, pickling tanks, industrial fabrication, industrial erection, industrial maintenance, factory shed fabrication, industrial anti corrosion painting Weight
1000lph ro plant with uv ozonator and SS storage tank. Required
IMPREGNATION CYLINDER size 1.5 Mtr. Inner dia. x 14.0 Mtr. Lon1 no. i) The cylinder will be made as per ASME Section VIII. The plate thickness will be 16 mm. and the dished end will be 20 mm. thick MS plate confirming to IS 2062. We will submit the test certificate for the plate thickness confirmation. ii) The impregnation cylinder shall withstand a test pressure of apprpx. 15.5 kg/cm² (225 psi) for working at 8 – 12 kg/cm² The cylinder shall be painted with two coats of enamel paint on two coats of red lead primer on outer surface and epoxy coal tar on zinc rich primer on inner surface. The cylinder shall be fitted with a wedge lock door manually operating by gear lever arrangement in one end and the other end fitted with a back dished end. The internal rail track to be fitted inside the cylinder for easy handling of loaded poles by the trolley. The cylinder will stand on MS fabricated pedestal. d Size : 1.5 M Dia; 15 M Long; Weight :18 Ton
Water treatment plant, R.O.plants, revers osmosis, revers osmosis equipments, revers osmosis purifiers, ro purifiers, RO water purifiers, anion resin, cation resin, chemical dosings, filmtec 8inch membrane, GE 4inch membrane, GE 8inch membrane, hydranautics 4 inch membrane, hydranautics 8 inch membrane, toray 8 inch membrane, toray 4 inch membrane, applied membrane, filmtec membrane, ge membrane, hydranautics membrane, toray membrane, ion exchange resin, revers osmosis machine, revers osmosis chemical.
Water Treatment Plant based on membrane separation technology for reduction of TDS, Dissolved Ions, Silica, many other Contaminants, etc. Design aspects.
Polishing Unit similar to D.M. To get De-ionized water of Zero TDS / Cond. Ideally installed after RO / DM systems. Design aspect.
