Denim is a rugged cotton twill textile, where the weft threads go under two or more warp threads. This twill weaving process produces the familiar diagonal lines traditionally found in the material.
Denim and the cotton fabric called duck are often confused with each other however duck does not have the diagonal stripes that are found in denim which is the distinguishing difference.
Another characteristic associated with denim is that only the warp threads are dyed, whereas the weft threads remain white. As a result of the warp-faced twill weaving, one side of the fabric shows the blue warp threads and the other side shows the white weft threads. This is why blue jeans are usually white on the inside and this is also the reason why their fading characteristics are so unique in comparison to most other fabrics. Denim fabric with 5 to 14 OZ along with 100% cotton, cotton spandex etc.
We do inigo denim lycra Attachment fabric also.
Weight: 5 to 14 OZ
Technics : Woven
Density : 72x42
Yarn Count : 7x6
Width : 25/60", 62/63", 66/67"
We are a major source in the cotton industry and supply various kinds of raw cotton
Cotton in India is the most valuable cash crop and also the leading foreign exchange earner for the country.
The quality of cotton begins with a best cotton selection so it is necessary to source cotton from selected cotton stations across the country at right time and in bigger lots to ensure uniform quality.
Indian raw cotton is now well introduced in all major cotton-consuming countries of the world. Major buyers are Bangladesh, Indonesia, Thailand, China, Pakistan etc.
Type:
Cotton Type : SHANKER 6 V-797 KALAGIN
Area : Gujarat
Length :27mm, 28mm, 29mm
Cotton Type :J/34 SG/RG AKATI
Area : Rajasthan
Length :24mm, 24mm
Cotton Type :Bunny Bharhma Lra, AKHY-1, NHH-44 Super Y1
Area : Maharasthra
Length :30mm, 28mm, 28mm, 27mm, 28mm
Polyester Staple Fibre (PSF) is kind of Polyester Fibre made directly from PTA & MEG or PET Chips or from Recycled PET Bottle Flakes. PSF made from PTA & MEG or PET Chips is known as Virgin PSF and PSF made from Recycled PET Flakes is called Recycled PSF. 100% virgin PSF is usually more costly than recycled PSF and is also more hygienic. Polyester Staple Fibre is widely used in spinning and weaving non-woven.PSF is mainly used for fiber fillings in pillows and sofa. It is also used widely in spinning to make Polyester Spun Yarn which is then knitted or weaved into fabrics.
PSF is mainly classified as Solid & Hollow Polyester staple fiber. Hollow PSF can also have some properties like Conjugated, Siliconized, Slick and Dry PSF. These properties are usually represented as HSC (Hollow Conjugated Siliconized), HCNS (Hollow Conjugate Non-Siliconized) or Slick PSF that has a smooth finish. Depending on the lustre, PSF can be classified as Semi Dull and Bright. By mixing color master-batch, dope dyed PSF can also be obtained in Optical White, Black and several colors.
We can supply you best quality polyester staple fiber from manufacturers & suppliers in India, China, Taiwan, Indonesia, Vietnam, Malaysia, Korea.
Polyester staple fiber virgin quality for spinning
Polyester staple fiber 1.5,3 denier for spinning- high tenacity from US-Origin fibers produced from virgin and regenerated raw materials
OPW-1.2 den x 38 mm (TIPOTI)
SD RQ-1.4 den x38 mm & 1.2 den x38mm
0.8-28 dtex with different cut length
Coarse types PZ 6.6 and polyester upto 500den
White, optical white, dope dyed black and other colored fibers
Solid and hollow fibers
We would like to introduce ourselves as one of the largest manufacturers/exporters of 100% cotton comber noil and waste from India.
We can offer you Indian Origin-100% cotton unbleached comber noil, organic comber noil, bleached comber noil- please not re-packed of sorted with UV technology for (Security paper) and dropping waste, flat cotton waste A,B Cotton Yarn waste, lickerin cotton carding waste for O-E spinning.
AIPL brings to you one of the finest quality ranges of bleached comber noil. Our products find its application in surgical, cosmetic, absorbents, dressing, packing & various other purposes. The knowledge base and infrastructure available are poised to meet both standard as well as customized product requirements at competitive prices and stiff delivery schedules.
Crispy Finish
Length of the fibers: 14mm to 18mm
100% Cotton
Absorbent Rate : 10S
Appearance: Bright White
Bleached and Neutral
Best quality of medical use.
For different types of surgical cotton with the best quality
Crispy Finish : (It will make the cotton crispy suitable for working of high speed cards) Pastel Colours : ( In Light Pastel Colours)
New Anti-microbial Finish : (Makes cotton resistant to microbial Growth)
Gin motes L It comes from raw cotton ginning.
Regin: The clean fiber after clearing gin motes
Reigned Motes: After cleaning gin motes, we will get reign and the waste is called reginned motes.
Please note in different areas in the USA, some people call as (Cotton Gin Motes). Gin motes is the waste from the cotton ginning process, but there is 40-80% cotton fibers mixed all contamination-free as US cotton. For open-end yarn or bleach it for absorbent cotton or currency paper pulp etc. As such cleaning machines also.
High in the trash, cotton dropping is obtained during yarn manufacturing. Its low cost and less fiber content make it ideal for spinning low-count yarn.
The cotton flat is a by-product of the yarn spinning industry produced in the first carding machine. This fiber is usually longer and has higher trash compared to comber noil.
Cotton comber or comber noil is a by-product of the yarn spinning industry produced when cotton is combed to remove short fibers. Being trash-free, it has varied uses in the security paper and medical industry and also as a blend for good quality cotton in OE spinning.
We are among the largest exporters of refined cotton waste and yarn waste from India to various countries China, Taiwan, Vietnam, Germany, Russia, Italy, Portugal, Thailand, and Turkey known for their rigorous quality standards. We source cotton waste from select spinning mills and process it at our state-of-the-art workshops to produce contamination-free waste that has varied applications across key industries. We are recognized for delivering the best services, consistently meeting client demands, and instilling trust.
To obtain high-quality refind cotton waste, we handpick spinning mills that stand up to our stringent and specific criteria like production technology, capacity, quality and process control, quality compliance of finished prdoducts and ability to sustain and maintain timely performance. In addition, we ensure that international norms on child labor, environment, and society are adhered to, Our supply chain is primarily concentrated in India and in Gujarat State where most of the ginning and spinning industries are located.
These mills have varied systems in place where older mills use conveyor belts and new units have installed automated processes to collect and bale-press waste. Our preference of automated units ensures minimal human intervention across stages and cleaner and less contaminated cotton waste.
We further process cotton waste at our dedicated units to further reduce the impact of foreign contaminants like yarn, polyester etc and be quality compliant with stringent paper mills and surgical cotton standards. Other applications of cotton waste include paper making, surgical, O/E spinning, automobile industry, tissue paper, bedding, manuring for mushrooms and more.
Industry - Welding, Oil & Gas, Petrochemicals, Electrical etc.
Shell Composition -
GDI32 - Modacrylic:Cotton:P-Aramid:Antistatic, IFR, 180 GSM
GDI49 - Modacrylic:FR Viscose:M-Aramid:Antistatic (IFR), 230-300 GSM
GDI37 - Cotton:Antistatic with FR Treatment, 240 to 350 GSM.
Quilting -
Middle Layer - Normal wadding or FR wadding as per needs
Inner Layer - Normal lining or FR lining as per needs.
Size �?�¢??
XS to 5XL (ASIA)
34 to 60 (US)
34R to 60R (UK)
44 to 70 (EU).
Safety Performance -
General :- EN ISO 13688, EN ISO 20471, ISO 15797
Arc :- EN 14116, EN 11611, EN 11612, NFPA 2112
Fire :- EN 61482, EN 1149, NFPA 70E.
Industry - Welding, Oil & Gas, Petrochemicals etc.
Shell Composition -
GDI36-100% Cotton with FR Treatment.
Quilting -
Padding: 100% Non-woven Polyester
Lining : 100% Polyester fabric.
Weight
200 GSM to 320 GSM.
Size -
XS to 5XL (ASIA), 34 to 60 (US), 34R to 60R (UK), 44 to 70 (EU).
Safety Performance -
General :- EN ISO 13688, EN ISO 20471, ISO 15797
Arc :- EN 14116, EN 11611, EN 11612, NFPA 2112
Fire :- EN 61482, EN 1149, NFPA 70E.
We are a leather goods export manufacturer based in India offering premium-grade leather shirts for global wholesalers, fashion brands, and private label clients. Crafted from full-grain cow or buffalo leather, our shirts are ideal for Western wear lines, biker collections, designer fashion brands, and retailers sourcing high-margin leather apparel.
We support custom branding, OEM production, and scalable MOQ-based pricing to help you build your own label or add to an existing fashion catalog.
Feature Details
Material 100% Genuine Leather (Buffalo or Cowhide)
Design Western Snap Button Shirt (Unisex)
Sizes S â?? XXL
Colors Available Black, Brown, Tan (custom shades on request)
Inner Lining Optional (cotton/polyester)
Logo Customization Embossing, tags, or printed labels
MOQ 100 pcs
Packaging Individual export-grade boxes per unit
Standard Fit 52% Cotton , 46% Polyeter, 2 % Spandex Fabric With Matte Finish, Beige. High Collar With Round Point, French Cuffs, Front Buttons Closure, Full Sleeves
