We are a leading Manufacturer, Traders and supplier of galvanized steel sheet. Galvanization is the process of applying a protective zinc coating to steel or iron in order to prevent it from rusting. The term is derived from the name of Italian scientist Luigi Galvani. Galvanized iron (GI) sheets are steel sheets which are basically coated with zinc and include a range of hot dip galvanized and electro-galvanized steel sheets. Zinc weathers at a very slow rate, so the coating generally has a long life. Zinc has a greater electro-negativity than iron and hence provides cathodic (or sacrificial) protection to the steel. This results in the zinc corroding in preference to the steel if the coating is chipped or damaged to expose the base metal. Besides acting as galvanic protector, The other functions of the zinc layer are as follow:
To retain the steel intact with its full initial strength.
To provide the surface a more pleasing appearance.
To increase the life of any suitable organic finishing system applied over it.
To protect the steel from corrosive attack in most atmospheres, acting as a continuous and lasting shield between steel and the atmosphere.
Features
Uniform zinc coating in the range of 60-600 GSM
Spangles: Zero / regular / minimized / suppressed
Surface finish: Normal spangle, large spangle, small spangle, matte surface
With and without tension leveling
Passivation: Chromated (Hexavalent / Trivalent)
Oiling: 100-1,000 GSM
Winding: Controlled / staggered (+/- 5 to +/-15mm)
Coil id: 508 / 610 mm
Elongation: 16-33%.
Dimensions
Thickness: 0.18 - 3.2 mm
Width: 800 - 1,500 mm
Length: Up to 2,500 mm
Grades & Standards
CQ, DQ, DDQ, EDDQ, HSLA
ASTM A653, SS33/37/40/50/60/80, EN 10327, JIS
Commercial Steel (CS Types A, B, and C)
Forming Steel (FS Types A and B)
Deep Drawing Steel (DDS Types A and C)
Extra Deep Drawing Steel (EDDS)
Structural Steel (SS) further designated by Grades (33,37,40,50,80)
High Strength Low Alloy Steel (HSLAS)
Supply condition
Coil / Slits/ Sheet form
Parameters:
Thickness: 0.30 4.00 mm
Width: 600- 1500 mm
Length: 1000 7000 mm
Temper: 1/8 Hard, Hard, Hard, Full Hard,
Finish: Dull, Matt, Bright, Mirror
Grade: D, DD, EDD, Super EDD
Edge: Mill edge, Slit edge
CTL: Up to 4500mm with tolerance of +2/-0 mm(Further close tolerance
on - request)
Surface Finish: Super Bright, Bright, Dull & Matte. (RaValuewith controlled Rmax on request).
Grades: Specifications - As per JIS/BIS/ ASTM/EN Standards
Low Carbon CRCA Grades
Super EDD/EDD/DD/D (SPCX, SPCEN, SPCD, SPCC) non-aging, IF-High
Strength steel (IF-HSS), High Strength Low Alloy Steel (HSLA), viz., ST -42,
ST-45, ST-52, SAPH-400/41O, Steel for Porcelein Enammeling, Corrosion
Resistant Steel, viz., Tin Mill Black Plate (TMBP)
Medium & High Carbon CRCA Grades
C- 30, C-40,MC -ll, EN - 8, C-55, MC-12,
EN- 9 C-62, C-60, C-80, HC-14, EN-42J
ELECTRICAL Grades Elec -I, Elec-n, Elec-nI, SemiProcessed Elect. Steel
OTHER CRCA Grades
Case Hardening Steel- 15Cr3, SAE 1010, SAE 1012
Through Hardening Grades- SAE 1040, SAE 1045, 1055, 1065, 1080, 1541
specification
item hot rolled medium and high tensile structural steel â?? is 2062 e250br
thickness 1.6mm-20mm
width 1000mm-2100mm
length 3000mm-18000mm
chemical composition of is 2062 e250br plate
grade c mn s p si carbon equivalent (ce), max
is 2062 e 250 br 0.22 1.50 0.045 0.045 0.40 0.41
mechanical properties of is 2062 e250br plate
grade yield strength n/mm2 tensile strength n/mm2 elongation (%)
is 2062 e250 br 250 min 410 min 23
plates sheets 1 mm to 300 mm thickness cold rolled, hot rolled
Dimensions
Thickness: 0.15-3.2 mm
Width: 900 - 1,500 mm
Length: Up to 2,500 mm
Oiling: 100-1,000 GSM
Winding: Controlled / staggered (+/- 5 to +/-15mm)
Coil id: 508 / 610 mm
Elongation: 16-33%.
Grades & Standards
CQ, DQ, DDQ, EDDQ, HSLA
ASTM A653, SS33/37/40/50/60/80, EN 10327, JIS
Commercial Steel (CS Types A, B, and C)
Forming Steel (FS Types A and B)
Deep Drawing Steel (DDS Types A and C)
Extra Deep Drawing Steel (EDDS)
Structural Steel (SS) â?? further designated by Grades (33,37,40,50,80)
High Strength Low Alloy Steel (HSLAS)
Supply condition
Coil / Slits/ Sheet form
Dimensions
Thickness: 0.4-3.2mm (CRCA); 0.15-1.9mm (CRFH)
Width: 800-1,625mm
Material - Mild Carbon Steel
Length - Can be cut to sheets according to requirement
Max. Weight - 20MT per coil
Grades
Extra Deep Drawing steels (EDD, IF)
IFHS (350, 400, 440)
Bake hardening steel (BH180,220)
HSLA (320, 340, 440)
Semi-processed electrical steels
Steels for enameling
CORTEN
ASTM: A 1008: DS type A & B, DDS, EDDS, EDDS+
IS: IS 513: D, DD, EDD
DIN: DIN 17100: ST 37.3, ST 44.2, ST 44.3, ST 52.3
EN: EN 10268: HSLA 340, HSLA 420,EN 10130: DC 01, 03, 04, 05/06
JIS: G 3141: SPCD, SPCE, SPEN, SPRC 340/ 390,SPFC 340/ 390/ 440
Supply Condition:
Coil / Slit / Sheet form
Surface textures
a. Smooth (plating applications) - suitable for electroplated
articles and also for re-rolling when a matt texture is undesirable. A maximum surface roughness
of 0,5 micrometers centre line average (CLA) is aimed for. Typical applications are car bumpers,
door locks and other electroplated articles.
b. Light matt (drawing and pressing applications)- surface roughness of 0.60 -
1,25 micrometers centre line average (CLA) and 100 peaks per inch (PPI) minimum is aimed for.
Typical applications are automobile panels.
c. Medium matt (drawing and pressing applications)- A surface roughness of 0,8 - 1,6 micrometers centre line average (CLA) and 100 peaks per inch
(PPI) minimum is aimed for. Typical applications are drum bodies and ends.
Dimensions
Thickness: 1.6 -25mm
Width: 900-2,100mm
Material - Mild Carbon Steel
Max. Weight â?? 22 â?? 25 MT
Grades
Drawing quality steel: D / DD / EDD
Cold rolling grades: IF (Interstitial Free) and High Strength IF Steels
Medium carbon / high carbon steels
High strength steels: JIS G 3113 SAPH310/370/400/440, JIS G 3134 SPFH-540/590, EN 10149-2 S550MC/S650MC, DP590
Line pipe â?? API X42 to X-80 grades (Sour and Non Sour Applications)
Boilers and pressure vessels grades
Ship building grades
Corrosion resistant steel
Re-rolling/ Drawing Grades,
Tube and Pipe/ Forming Grades,
Structural/ Medium Tensile Tube/ Forming Grades,
LPG/ Low Pressure Vessel Grades,
HSLA Grades,
Medium Carbon Grades,
Weather Resistance Grades,
Line Pipe Grades,
Chequered Plates
ASTM (USA) : A 36 A572: Gr 42, Gr 50
IS (INDIA) : IS 2062: E250 Gr A/ B/ C, E350 Gr A/ B/ C
DIN (GERMANY) : DIN 17100: ST 37.3, ST 44.2, ST 44.3, ST 52.3
BS (ENGLAND) : BS 4360: 40, 43, 50
EN (EUROPE) : EN 10025: S235, S275, S355
JIS (JAPAN) : G 3106: SM400, SM 490 G 3101: SS400, SS490
Type : Finned
Material : Copper
Thickness : 5-10mm
Application : Industrial
Color ; Brown
Features : Durable, High Strength, Rustproof
Grade : Superior
Respected Sirs, We Can Supply The Above Cargo As Per The International Laid Standards Within The Brackets Of Price Provided A Minimum Order Qty Of 25000 Tons To 50000 Tons Per Shipment.
Respected Sirs, We Can Supply The Above Cargo As Per The International Laid Standards Within The Brackets Of Price Provided A Minimum Order Qty Of 25000 Tons To 50000 Tons Per Shipment.
We are an Accredited Manufacturers of "HES" Parallel Threaded Rebar couplers in compliance with BS 8110, BS 5900, ACI 318 and BIS 16172:2014 codal specifications. We have a huge clientelle across India and Global for many Renouned Projects.
The plates and coils are of premium quality in terms of dimensional adherence and internal soundness owing to its clean raw material, sound steel refining facilities and an efficient rolling mill.
SS Sheet & Coil available from thickness 1mm to 20mm 304/304L & 316/316L quality in size 8ftx4ft & 5ftx10ft. Also plastic coated sheets available from 1mm to 3mm. Customized sizes also available.
Ss Sheet Available From Width : 1000 Mm, 1250 Mm, 1524 Mm, / 2000 Mm Length : 2440 Mm / 3050 Mm / 6100 Mm Grade : 304/ 304l/ 316/ 316l. Thickness : 3 Mm To 100 Mm Also Plastic Coated Sheets Available From 1mm To 3mm.
Applications : Machining / Furniture / Pharmaceutical & Engineering Application.
