The G I. Wire of 3.15mm dia x 4.00mm dia with
tolerance of +or- 2.5 % in dia as per IS:280/1978
with latest amendment/revision if any.
Yes
2) The G. I. Wire shall drawn from soft wire having
tensile strength 450-550 N/mm2
Yes
3) Breaking Load shall be as under :
for G. I. Wire 3.15mm dia x 339.3 to 459.2
for G. I. Wire 4.00 mm dia 544 to 740.54
Yes
Yes
4) Zinc coating shall be as under
i) Heavy coating IS : 4826/78
ii) How dip galvanizing, weight of zinc coating
when tested IS : 4826/79
iii) The quality of zinc shall be as per IS : 209/1992
iv) No. of dip guaranteed.
3 Nos. of 1 minute dips & 1 No. 1/2 minute dip as
per IS:2633/1986
Yes
Yes
Yes
Jhas 0.8 Mm - 1.2 Mm Sealing Wire Galvanized Steel for Lead Seal. ...
50-100 M Sealing Wire, For Industrial. ...
Packing Wire. ...
0.5-5 Mm Golden Sealing Wire, For Industrial, Thickness: 5-20 Mm. ...
Jamesmaag 1.26 Mm Sealing Wire. ...
Silver 1 Mm Packing Wire. ...
NBI Lead Seal. ...
Smartpack 15 Mm Sealing Wire, For Construction, Thickness: 1 Mm.
Material Grade: C 45.
Usage/Application: AUTOMOTIVE PARTS / GEARS / PINIONS / SHAFTINGS.
Shape: ROUND/SQ./ HEX.
Single Piece Length: 3 - 6 - 12 MTR.
Material: Carbon Steel.
Size: DIA 5 MM TO DIA 400 MM.
Technique: HOT ROLLED / COLD ROLLED / FORGED.
Surface Finish: BRIGHT / BLACK.
Chequered Plates for structural steel: in Sheets: Size: 1mx2m and 4'x8', in thickness of 1.50 mm, 1.60 mm and 1.80 mm. Packing: Sheets packed in bundles, each weighing between 3 to 5 M/Tons. In Coils: Size: 1000mm and 1219mm, in thickness of 1.50mm and 1.60mm. Weight of each coils to be between 6 to 8 M/Tons.
2 Tensile properties of the wire shall be as follows: Tensile strength of galvanized M.S. Wire shall be 300 550 N/mm2. 4.1. 3 Type of coating of galvanise shall be heavy as per IS: 4826 1979 and the wires shall be galvanized after drawing & annealing.
MS Chequered Coil, For Construction. ...
Jindal Stainless Steel Chequered Coil 304l, For Automobile Industry, Thickness: 1-10MM. ...
Stainless Steel Chequered Coil 202, For Pharmaceutical / Chemical Industry, Thickness: 1 Mm To 12 Mm. ...
Mild Steel Chequered Coil, Thickness: 3 To 12 Mm.
Bumper Plate Storage - Compact
Footprint (D x W x H) 25 x 12 x 10 (metric cm: 64 x 31 x 25)
Machine Weight 29.5 lb (13.4 kg)
Small Plate Storage 2 spaces; 4.5" (11.4 cm)
Medium Plate Storage 1 space; 6.75" (17 cm)
Low alloy grades can resist corrosion in normal conditions. Higher alloys resist corrosion by most acids, alkaline solutions and chloride environments. The corrosion resistance of stainless steel is due to their chromium content. In general, stainless steel contain a minimum of around 10.5% chromium.
Metal strip is narrow, thin stock that is usually 3/16 in. (4.76 mm) or less in thickness and under 24 in. (609.6 mm) in width. Metal strips are formed to precise thicknesses and/or width requirements.
2. Perimeter channel 0.55 x 20 x 30 x 27 x 3660 mm
3. Intermediate channel 0.9 x 45 x 15 x 15 x 3660 mm
4. Ceiling Section 0.55 x 50.5 x 26 x 26 x 10.5 x 10.5 x 3660 mm
5. Ceiling Angle 25 x 10 x 0.55 mm [Based on 0.9 m suspension]
