2 Tensile properties of the wire shall be as follows: Tensile strength of galvanized M.S. Wire shall be 300 550 N/mm2. 4.1. 3 Type of coating of galvanise shall be heavy as per IS: 4826 1979 and the wires shall be galvanized after drawing & annealing.
MS Chequered Coil, For Construction. ...
Jindal Stainless Steel Chequered Coil 304l, For Automobile Industry, Thickness: 1-10MM. ...
Stainless Steel Chequered Coil 202, For Pharmaceutical / Chemical Industry, Thickness: 1 Mm To 12 Mm. ...
Mild Steel Chequered Coil, Thickness: 3 To 12 Mm.
Bumper Plate Storage - Compact
Footprint (D x W x H) 25 x 12 x 10 (metric cm: 64 x 31 x 25)
Machine Weight 29.5 lb (13.4 kg)
Small Plate Storage 2 spaces; 4.5" (11.4 cm)
Medium Plate Storage 1 space; 6.75" (17 cm)
Low alloy grades can resist corrosion in normal conditions. Higher alloys resist corrosion by most acids, alkaline solutions and chloride environments. The corrosion resistance of stainless steel is due to their chromium content. In general, stainless steel contain a minimum of around 10.5% chromium.
Metal strip is narrow, thin stock that is usually 3/16 in. (4.76 mm) or less in thickness and under 24 in. (609.6 mm) in width. Metal strips are formed to precise thicknesses and/or width requirements.
2. Perimeter channel 0.55 x 20 x 30 x 27 x 3660 mm
3. Intermediate channel 0.9 x 45 x 15 x 15 x 3660 mm
4. Ceiling Section 0.55 x 50.5 x 26 x 26 x 10.5 x 10.5 x 3660 mm
5. Ceiling Angle 25 x 10 x 0.55 mm [Based on 0.9 m suspension]
Dimensions of 316 Stainless Steel Equal Angle
Sizes (all Dimensions in milimeter) Approx Weight SS Angle Bar (kilogram/meter) SS 304 Angle Bar Sizes (all Dimensions in milimeter)
40 x 40 x 5 2.97 80 x 80 x 6
50 x 50 x 4 3.05 80 x 80 x 8
50 x 50 x 5 3.78 80 x 80 x 10
63 x 63 x 4 3.90 100 x 100 x 8
Metal Sheet Specifications
Overall Thickness: At least.
Gauge Thickness: At least. No more than. ...
Overall Width / OD: At least.
Overall Length: At least.
Tensile Strength (UTS, Break): At least. No more than. ...
Yield Strength (YS): At least. No more than. ...
Elongation: At least. No more than. ...
Tensile Modulus (E): At least. No more than.
Finished: Hot dip Galvanized.
Tension strength: 700-800 N/mm2.
Wire diameter: 2.10 mm.
Tolerance: + 0.025 mm / - 0.025 mm.
Thickness of Zinc coating: 15-17 g/m2.
Coil dimensions: inner diam. about 400 mm.
Outer diam: 900 mm.
Height: 750 mm.
Steel wool grades and fiber thickness
Steel wool is made by shaving thin layers of steel from wires. Steel wool consists of long and relatively strong shavings with sharp edges.
