Steel sheets with TPI inspection. Lot size & weight.
Cold roll Cold roll sheets shouldbe soft metrial Size 900 mm 1000 mm 1250 mm more than thickness from 0.27 to 3.00 mm
Cnc bending 8mm to 16 mm thick, ss or ms
Steel Deck is used as composite floor system. The steel deck profile sheet has a ribbed profile with embossment to interlock with concrete slabs, creating a reinforced concrete slab that serves dual purpose of permanent form and positive reinforcement. Deck profile sheet is offered in Zinc coated and precoated steel, zinc ranging from 120 to 275 gsm which gives better resistance against corrosion. Steel Deck is widely used in multi-storey buildings. Storage facilities, industrial sheds, shopping malls, ware houses. Specification Galvalume as per IS 15965 or equivalent grades like ASTM A 792, AS 1397, EN10147/EN10142/DIN 17162/JIS G3302/ASTM A653 Thickness (mm) 0.15 to 1.6 Width(mm) 100 -1500 Coating Acrylic coating (Hexavalent /Trivalent), Antifinger Print Yield strength (MPA) 240,340 ,550. Temper Soft /Hard /Extra Soft Coil weight (MT) 3-20 Max Al- Zn Coating AZ 40-AZ 150
Thickness (mm) : 0.10 to 3.00 mm Width (mm) : 760, 820, 900, 1000, 1220, 1320, 1420 or as per customize width. Length : 1830, 2440, 2500 (or as per requirement) Zinc coating (GSM) : 80,90,120,150,180,200,275, 350, 450 Temper : Soft, Extra soft & Hard. Hardness (HRB) : 35 HRB TO 99. Spangles : Regular/ Minimised /Suppressed / Zero (Skin pass). Thickness (mm) : 0.10 to 0.80 Width (mm) : 720, 740, 760, 780, 800, 840, 910, 1100, 1220. Length (mm) : 1830, 2135, 2440, 2745, 3050, 3660, 4270, 4880 or as per requirement. Grade : JIS G 3302- SGCH, SGCC, IS 277:2003 Supply Width : 960 mm (+/- 10 mm) Covered Width : 932 mm (+/- 5 mm) Pitch : 230 mm (+/- 2 mm) Crest Height : 51 mm (+/- 2 mm) Crest Width : 89 mm (+/- 2 mm)
Steel Sheet
Product Details: Thickness : 1-5 mm Material Grade : S355J2 N Type : Plate Material : SS Shape : Rectangular Surface Treatment : Galvanized Usage/Application : Industrial & Construction S355J2 N Steel Sheets
Hot rolling is a mill process which involves rolling the steel at a high temperature (typically at a temperature over 1700�° F), which is above the steelâ??s recrystallization temperature. When steel is above the recrystallization temperature, it can be shaped and formed easily, and the steel can be made in much larger sizes. Hot rolled steel is typically cheaper than cold rolled steel due to the fact that it is often manufactured without any delays in the process, and therefore the reheating of the steel is not required (as it is with cold rolled). When the steel cools off it will shrink slightly thus giving less control on the size and shape of the finished product when compared to cold rolled.
Our company is a prominent Stockist,Supplier & processing agent. Our Products Are HR Coils & Sheets, CR Coils & Sheets, GP Coils & Sheets, GPSP, different grade of sheets and plates which include medium carbon, high carbon, high tensile grades like E350, BSK46, YS550 and HS800, etc.
We are a leading Manufacturer, Traders and supplier of galvanized steel sheet. Galvanization is the process of applying a protective zinc coating to steel or iron in order to prevent it from rusting. The term is derived from the name of Italian scientist Luigi Galvani. Galvanized iron (GI) sheets are steel sheets which are basically coated with zinc and include a range of hot dip galvanized and electro-galvanized steel sheets. Zinc weathers at a very slow rate, so the coating generally has a long life. Zinc has a greater electro-negativity than iron and hence provides cathodic (or sacrificial) protection to the steel. This results in the zinc corroding in preference to the steel if the coating is chipped or damaged to expose the base metal. Besides acting as galvanic protector, The other functions of the zinc layer are as follow: To retain the steel intact with its full initial strength. To provide the surface a more pleasing appearance. To increase the life of any suitable organic finishing system applied over it. To protect the steel from corrosive attack in most atmospheres, acting as a continuous and lasting shield between steel and the atmosphere. Features Uniform zinc coating in the range of 60-600 GSM Spangles: Zero / regular / minimized / suppressed Surface finish: Normal spangle, large spangle, small spangle, matte surface With and without tension leveling Passivation: Chromated (Hexavalent / Trivalent) Oiling: 100-1,000 GSM Winding: Controlled / staggered (+/- 5 to +/-15mm) Coil id: 508 / 610 mm Elongation: 16-33%. Dimensions Thickness: 0.18 - 3.2 mm Width: 800 - 1,500 mm Length: Up to 2,500 mm Grades & Standards CQ, DQ, DDQ, EDDQ, HSLA ASTM A653, SS33/37/40/50/60/80, EN 10327, JIS Commercial Steel (CS Types A, B, and C) Forming Steel (FS Types A and B) Deep Drawing Steel (DDS Types A and C) Extra Deep Drawing Steel (EDDS) Structural Steel (SS) further designated by Grades (33,37,40,50,80) High Strength Low Alloy Steel (HSLAS) Supply condition Coil / Slits/ Sheet form
Parameters: Thickness: 0.30 4.00 mm Width: 600- 1500 mm Length: 1000 7000 mm Temper: 1/8 Hard, Hard, Hard, Full Hard, Finish: Dull, Matt, Bright, Mirror Grade: D, DD, EDD, Super EDD Edge: Mill edge, Slit edge CTL: Up to 4500mm with tolerance of +2/-0 mm(Further close tolerance on - request) Surface Finish: Super Bright, Bright, Dull & Matte. (RaValuewith controlled Rmax on request). Grades: Specifications - As per JIS/BIS/ ASTM/EN Standards Low Carbon CRCA Grades Super EDD/EDD/DD/D (SPCX, SPCEN, SPCD, SPCC) non-aging, IF-High Strength steel (IF-HSS), High Strength Low Alloy Steel (HSLA), viz., ST -42, ST-45, ST-52, SAPH-400/41O, Steel for Porcelein Enammeling, Corrosion Resistant Steel, viz., Tin Mill Black Plate (TMBP) Medium & High Carbon CRCA Grades C- 30, C-40,MC -ll, EN - 8, C-55, MC-12, EN- 9 C-62, C-60, C-80, HC-14, EN-42J ELECTRICAL Grades Elec -I, Elec-n, Elec-nI, SemiProcessed Elect. Steel OTHER CRCA Grades Case Hardening Steel- 15Cr3, SAE 1010, SAE 1012 Through Hardening Grades- SAE 1040, SAE 1045, 1055, 1065, 1080, 1541
EG SHEET 4 FEET X 8 FEET
Available in diverse grades of carbon & alloy steel, our variety of carbon & alloy steel sheets, plates & coils ranks highest in the market for its quality and efficiency. Clients can avail these in different ranges and at affordable prices. Range 1 mm to 200 mm thk in 1000 mm to 3000 mm width x 2500 mm / 5000 mm / 10000 mm / coil. Carbon Steel ASTM / ASME a 516 / 517 gr. 60 / 70 , is 2062 , is 2002 Alloy Steel ASTM / ASME a 387 gr f 5, f 9 , f 11 , f 12 , f 22 , f 91.
In order to fulfil the demands of different industries, we offer a wide range of MS plates that are precision engineered using streamlined manufacturing process. Available in a variety of grades, these MS plates are known for their rust resistance and long lasting features. We can customize them as per the demands of our clients.
Duplex steel sheets are widely used in modern construction. These duplex steel sheets are mainly used in the metal and paper industry for the heat radiating property. These duplex steel sheets are made up of a mix of chromium, nickel and molybdenum. These three metals keep the sheets stainless. They have a high resistance against corrosion. They are resistant to the temperature up to 300 degrees. The surface is resistant to the extreme weather condition. These sheets are used in the chemical industry and the paper industry. The duplex steel sheets are in demand for their features. They are used in almost every heavy industry. The duplex steel sheets can be cut into pieces to make plates that reduce the welding cost. These sheets are stainless and are very easy to carry. It gives excellent resistance against corrosion, pitting and crevice. The sheets can bear extreme heat that makes this type more durable than the others do.
CRGO - 0.30 Regular and 0.30 Jumbo materials available. For rates and pictures please contact
I AM EXPORTER STEEL SHEET,PIPE,PLATE,ANGEL CHANNEL,AND ALL INDUSTRIAL TOOLS SUPPLIER. IF ANY REQUIRMENT THEN CONTACT TO ME SKYPE: OSAKAIMPEX
Colour Coated Sheets Features Coating thickness: 15-40microns Finishes: Smooth, matt, high gloss, textures, printed Available in corrugated sheets / plain sheets / coils. Dimensions Thickness: 0.20-1.00 mm Width : 300 -1220 mm Supply Form Supplied in coil form Application Industrial roofing and cladding, cold storage and warehouses, airports, atriums in malls, showrooms, false ceilings, lighting fixture Refrigerators, display freezers, washing machines, air conditioner wraps Railway coaches, luxury coaches
we supply and export of high quality steel fasteners like nuts, bolts, washer, screws.
Standards ASTM / ASME A240 / SA240 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sandblast, Brush, etching. Finish Hot rolled (HR), Cold rolled (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated), Galvanized etc.
