Indian Steel Plates Suppliers and Manufacturers

We deals in the following products of India, China, Taiwan and Korea Origin:- 1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc) 2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc) 3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc) 4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc) 5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless ) 6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps. 7)Heavy Duty Props & Light Duty Props. 8)Nuts, Bolts, Nails & Fastners 9)System Scaffolding, Base Plate & Adjustable Base. 10)Steel Tie Rod, Waller Plates and Wing Nuts. 11)Drop Forged and Pressed Sheet Metal Couplers of all types. 12)Steel Billets, Steel Angle & Steel Channels.

Iron and steel finished products like tmt bars, ms pipes, ms angle, ms plates..

Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.

Steel grating type: welded steel grating and press bar grating. Bearing bar type: flat bar and I bar. Bearing bar pitch: 20 mm, 30 mm or 40 mm. Cross bar pitch: 50 mm or 100 mm. Nosing type: checker plate, strip plate and hole plate. Surface treatment: galvanized or anti-corrosion painted. Bearing load: 1.5 kN.

Chequered Plates for structural steel: in Sheets: Size: 1mx2m and 4'x8', in thickness of 1.50 mm, 1.60 mm and 1.80 mm. Packing: Sheets packed in bundles, each weighing between 3 to 5 M/Tons. In Coils: Size: 1000mm and 1219mm, in thickness of 1.50mm and 1.60mm. Weight of each coils to be between 6 to 8 M/Tons.

Bumper Plate Storage - Compact Footprint (D x W x H) 25 x 12 x 10 (metric cm: 64 x 31 x 25) Machine Weight 29.5 lb (13.4 kg) Small Plate Storage 2 spaces; 4.5" (11.4 cm) Medium Plate Storage 1 space; 6.75" (17 cm)

Hot Rolled Coils, Sheets & Plates Thickness 1.2 - 25.4mm Width 900-2100 mm Grades Re-rolling/ Drawing Grades, Tube and Pipe/ Forming Grades, Structural/ Medium Tensile Tube/ Forming Grades, LPG/ Low Pressure Vessel Grades, HSLA Grades, Medium Carbon Grades, Weather Resistance Grades, Line Pipe Grades, Chequered Plates

Mild Steel Plate : Mild Steel Plate : All sizes available

Steel Plates: Product Description : Stainless Steel coils and Sheets Thickness - 0.5mm to 10mm Width - 1000mm to 1500mm Finish - 1D,2D, 2B,No.4, No.8, Polish etc. Surface protection: PVC film, Laser Fibre PVC Novacel 4228 etc. Key Specifications/Special Features : Standards: EN 10088-2, ASTM A240 etc Product origin : India, China, Thailand, Malaysia, Turkey, Ukraine, Etc. Minimum Order Size And Packgaing Details : Any. Packaging As Per Customer Requirements. Sea-worthy.

Variety of steel plates with quality available at its best price .

Modern and advanced technologies are used in the manufacturing of these plates. This helps in adding high strength to the quality of product these plates are manufactured using the finest grade of raw material having international quality. These plates are having an approved international standard. These plates are made from a specific grade of steel and designed with specific chemical composition and mechanical properties formulated for particular plates. These plates are having zero impurities and for manufacturing these plates some process is done. The manufacturing process is as follow: Forming Grinding Cutting machining The quality controlling team check the quality and quantity of the plates. The plateâ??s quality is checked is done through product quality control parameter. This 100% guarantee no poor quality is delivered to the customers Feature of S235 Structural Steel Plate There are many good features that are found in S235 Structural Steel Plate because of this feature these plates are highly in demand. Some important feature is as follow: Excellent formability Great weld ability High tensile strength Hardness Resistance to general corrosion Good functionality Low maintenance Flexible and adaptable Stronger Testing of S235 Structural Steel Plate Testing plays an important role in the manufacturing of S235 Structural Steel Plate. Quality of plates is checked through testing. Testing of these plates is done under skilled quality checker who is having perfect knowledge of these plates. The main motive is to check whether the plates are having the excellent quality or poor quality. Important plates testing method are as follow: Hydrostatic analysis Impact analysis X-ray test Mechanical test Positive material test ultrasonic test Macro test Firmness test High-temperature tension test Chemical test Pitting resistance test V-notch impact test Test Certification The test certificate is provided to the customers just to assure that the plates offered are free from all the impurity and the plates are having excellent quality. Some important test certification is as follow: Third party inspection reports 100% radiography test reports MTC as per EN 10204/3.1b Customers reports IBR test certification Raw material certificate Mill test certification

Modern and advanced technologies are used in the manufacturing of these plates. This helps in adding high strength to the quality of product these plates are manufactured using the finest grade of raw material having international quality. These plates are having an approved international standard. These plates are made from a specific grade of steel and designed with specific chemical composition and mechanical properties formulated for particular plates. These plates are having zero impurities and for manufacturing these plates some process is done. The manufacturing process is as follow: Forming Grinding Cutting machining The quality controlling team check the quality and quantity of the plates. The plate's quality is checked is done through product quality control parameter. This 100% guarantee no poor quality is delivered to the customers Feature of S235 Structural Steel Plate There are many good features that are found in S235 Structural Steel Plate because of this feature these plates are highly in demand. Some important feature is as follow: Excellent formability Great weld ability High tensile strength Hardness Resistance to general corrosion Good functionality Low maintenance Flexible and adaptable Stronger Testing of S235 Structural Steel Plate Testing plays an important role in the manufacturing of S235 Structural Steel Plate. Quality of plates is checked through testing. Testing of these plates is done under skilled quality checker who is having perfect knowledge of these plates. The main motive is to check whether the plates are having the excellent quality or poor quality. Important plates testing method are as follow: Hydrostatic analysis Impact analysis X-ray test Mechanical test Positive material test ultrasonic test Macro test Firmness test High-temperature tension test Chemical test Pitting resistance test V-notch impact test Test Certification The test certificate is provided to the customers just to assure that the plates offered are free from all the impurity and the plates are having excellent quality. Some important test certification is as follow: Third party inspection reports 100% radiography test reports MTC as per EN 10204/3.1b Customers reports IBR test certification Raw material certificate Mill test certification

Scope - COR-TEN A applies to plates up to 12.5mm in thickness, COR-TEN B applies to plates up to 50mm in thickness Definition :- Weathering means that due to their chemical compositions COR-TEN A and COR-TEN B steels, when utilized unprotected, exhibits increased resistance to atmospheric corrosion compared to unalloyed steels. This is because it forms a protective layer on its surface under the influence of the weather. Applications:- The steel is used for various types of welded, bolted and riveted constructions e.g. steel frame structures, bridges, tanks and containers, exhaust systems, vehicles and equipment constructions. Basic guidelines for the use of this steel in the unprotected condition are described in EN 10025-5 and DASt rule 007 In order to obtain fine grain structure a sufficient amount of nitrogen absorbing elements is added (e.g. 0.02% Al). Mechanical Properties:- In the state of delivery condition At room temperature for plates 3mm in thickness (transverse test specimans, according to EN 10002). Requirements to hot rolled plates 3mm in thickness according to EN 10025-5. Grade Minimum yield point (ReH Mpa *) Tensile strength Rm MPa Minimum elongation A (Lo=5.65 â??So) % COR-TEN A 355 470-630 20 1 Mpa = 1N/mm2 In case of cold rolled material the yield point is min. 310 Mpa and the tensile strength min. 445 MPa. Furthermore cold rolled sheets â?¤3mm in thickness made of steel grade COR-TEN A-F for increased demand to the cold formability is available. Yield point min. : 275 Mpa Tensile strength min.: 410 Mpa Elongation min. :25% Tolerances on dimensions and shape according to :EN10131. Grade Material thickness mm Minimum yield point (ReH Mpa *) Tensile strength Rm MPa Minimum elongation A (Lo=5.65 So) % COR-TEN B 16 355 470-630 20 16 345 1 Mpa = 1N/mm2 The notched-bar impact energy is determined on ISO-V longitudinal test specimens at a temperature of - 20C as an average of three tests. For product thicknesses 10mm the average value is at least 27 J. For thicknesses between 10mm and 6mm, the minimum impact value is reduced proportionally to the specimen width (product thickness).No impact test is performed on products below 6mm in thickness. Number of Tests:- 1 tensile test 1 test specimen per 40 t from each heat*) Notched bar impact test 1 set specimens per 40 t from each heat *) (3 specimens) (at test temperature -20C) as referenced in EN 10025-5 EQUIVALENT SPECIFICATIONS:- Material # EN 10155 SEW 087 NFA 35-502 UNI BS 4360 UNE ASTM JIS G3114 8961 S235J2W WTSt 37-3 E 24 W 4 Fe 360 DK 1 8945 S355J0WP E 36 WA 3 Fe 510 C1K1 WR 50 A 8946 S355J2WP - E 36 WA 4 Fe 510 D1K1 A 242 Type 1 - 8959 S355J0W - E 36 WB 3 Fe 510 C2K1 WR 50 B - A 588 - A 242 Gr. 1 SMA 50 AW 8963 S355J2G1W WTSt 52-3 - Fe 510 D2K1 WR 50 C - A 588 Gr. A to 8965 S355J2G2W SMA 50 CP 8966 S355K2G1W - E 36 WB 4A 709 Gr. 50 W - 8967 S355K2G2W

ABRASION RESISTANT STEEL PATES is used in areas where there is likely to be a high degree of abrasion or wear of the steel plate. Steels with a high HB rating (Brinel Hardness) are intended for applications where wear or abrasion resistance is important. The benefit of using an abrasion resistant steel is that that the plant, machinery or constructions working life can be extended considerably. This can significantly improve the reliability, durability and safety of structures and equipment. It also helps to reduce the maintenance costs associated with wear and breakdown of plant. 400 HB steel is over 3 times harder than mild steel (120HB), but only a third as hard as stainless steel (1250HB). Shifco is Suppliers of a wide range of plates. With our State-of-the-Art infrastructure and highly experienced staff, we ensure production of efficient, durable and high performing products. The Corten and Abrasion Resistant Steel Plates are made up of steel and are resistant to corrosion, heat, abrasion and varying pressures. Our Corten and Abrasion Resistant Steel plates are highly acknowledged for their performance and have far and wide applications in various industries and manufacturing units. Providing customer satisfaction, efficiency and quality to our clients and customers at every step of business is our main motto. Our products are reasonably priced and available all over India. Abrasion & mechanical wear-resistant steel plates for quarries & construction machinery: Gravel & stone conveying plants (routes, chutes, hoppers) & crushing plants. Shovels, diggers, graders, bulldozers, dumpers, dredging machines, crushers, grinders, screens, hoppers, mixers, moulds for concrete aggregates. Wear resistance plates for mining machinery. Extractors, unloaders, spiral chutes, crushers, grinders, screens, conveyors Abrasion-resistant steel plates for Cement Plants & Refractory Product Plants: hoppers, crushers, chutes, cyclones, Abrasion Resistant Steel plates BHN 200 300 400 450 500Brinel 400 BHN, 450 BHN, 500 BHN 400 HBW, 450 HBW, 500 HBW Brinel 200 BHN, 250 BHN 200 HBW, 250 HBW RAEX 400, RAEX 450, RAEX 500 FORA 400, FORA 450, FORA 500 NICRODUR 400, NICRODUR 450, NICRODUR 500 BRINAR 400, BRINAR 450, BRINAR 500 DILLIDUR 400, DILLIDUR 450, DILLIDUR 500 AR400, AR450, AR500, HB500, HARTPLAST 360 SUMI-HARD 400 / JFE 360LE / CURESABRO SAILHARD, TISCRAL, JISCRAL, LAS07

Range : 0.1 mm to 100 mm thick upto 2500 mm width & upto 8000 mm length available with NACE MR 01-75s. Stainless Steel : ASTM / ASME SA 240 304 , 304L , 304H, 309S , 309H, 310S , 310H , 316 , 316H , 316L , 316 TI , 317 , 317L , 321 , 321H , 347 , 347 H , 409 , 410 , 410S , 430 Duplex Steel : ASTM / ASME SA 240 UNS NO. S 31803 , S 32205 , S 32550 , S 32750 , S 32760.

Sheet and Plates Grades : Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000 Form: Hastelloy Sheet Hastelloy Coil Hastelloy Strips Hastelloy Plates Hastelloy Circle Hastelloy Ring

Grades : Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750 Standard : ASTM / ASME SB 168, ASTM / ASME SB 424 , ASTM / ASME SB 443

Duplex Stainless SteelDuplex Steel Sheets & Plates Supplier & Exporter in India. HEUBACH INTERNATIONAL is one of the prime supplier, stockist, exporter and trader of Duplex Steel Sheets and Plates in Mumbai, India. Engaged as a supplier and exporter, we are captivated in providing finest quality of Duplex Steel Sheets, which are being made up by using high-grade of stainless steel. Beside from this, these Duplex Steel Plates can be tailored as per the requirements of our customers for to gain their maximum satisfaction. Meanwhile, these sheets and plates has some of the best features like available in quite reasonable prices, are accurately designed, and has longer service of life. Ensuring to give high quality of materials, these can further be custom-made in terms of sizes, shapes and thicknesses as per the precise needs of our venerated patrons. Duplex Sheets, Duplex Steel Sheets & Plates, Duplex Steel UNS S31803, S32205 Plates, Duplex Steel Perforated Sheet, Duplex Chequered Plate Stockist & Trader in India. Duplex Steel Sheets & Plates Specification: Grade :UNS S31803, S32205 Standard :ASTM A240 / ASME SA240 Size :1250mm x 2500mm, 1500mm x 3000mm, 2000mm x 6000mm Length :4.0mm â?? 100mm Hardness :Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. Finish :Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) Form :Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.

Ss And Ms Plates All Grades Ss And Ms Coil With Heat Treatment Bright Bars (hexagon, Round Bars,coils)