Our Production range for Cold Rolled SS Precision Strips/Coils is as follows: CR Coils/Strips Width Thickness Finish Edges Size 20 mm -700 mm 0.10 mm û 4.50 mm 2B, 2D,HRAP Mill Edge & Slitted Edge Grade Austenitic Series (SS 301, SS 304, SS 304 L, SS 316, SS 316L, SS321) Low-Austenitic Series [SS 202 (4% Nickel), J4 (1% Nickel) & J-7 àNickle)] Our Production range in Stainless Steel Corrugated Flexible Hose & Assemblies: Grade SS 316, SS 321 or SS 304 Wire Braiding Size Range +ö to 4ö Dia Test Flex Fatigue, Burst Pressure, Bend Radius Test ,Flame Test
Steel coils Packed on wooden pallets
Jis 3141 / 3302 As per mutual agreement
* Cut to length TMT as per specific requirement of Customer. * Cut and bend of TMT in any shape with numerical control Applications Construction & Infrastructures Steel framing, False ceiling, Sandwich panels, ducting, decking, roofing, purlin, HVAC applications. White Goods Refrigerators, deeps freezers, washing machines, air coolers. Automotive Auto internal components, Bus bodies building. Containers Grain silos, trunk, drum & barrels, crash guards /handrails, buckets, gardening cans, milk containers, animal feeding pans, fish pan etc Galvanised Coil Specifications Galvanised as per IS 277 or equivalent grades like ASTM A 653, EN10327 Thickness (mm) - 0.10 to 3.00 mm (Galvanized) Width(mm) - 30 mm to 1420 mm Base metal - Cold rolled steel as per IS 513 Spangles -Regular/ Minimised /Suppressed / Zero (Skin pass). Leveling - With or without tension leveling. Passivation - Chromated (Trivalent / Hexavalent) Oiling - non oiled, oiled 100 -450 GSM Yield strength (MPA) - 240, 360, 550 MPa Temper - Extra soft, Semi Hard, Full hard Hardness (HRB) - 35 TO 90 Grades - CQ, DQ, DDQ, EDDQ, HSLA. Coil weight (MT) - 8(Max) Winding - Controlled /staggered (+/-5 to +/- 15 mm)
Applications Building Roofing Transport Solar Energy Furniture. Home Appliances, such as the side door plate of refrigerators, shell of DVDs, air conditioners and washing machines. Specification JIS G 3312, ASTM A 755M, EN 10169 Thickness (mm) : 0.14 to 1.20 Width(mm) : 700-1520 mm Paint : As per RAL No or customer's Color sample Yield strength (MPA) : 240,340 ,550. Paint : Polyester Coating Type : RMP, SMP, PVDF, SDP, Laminated, Wood Finish, Camouflage, Embossed. Back Coat : Epoxy
Cut to length TMT as per specific requirement of Customer. Cut and bend of TMT in any shape with numerical control. Applications Construction & Infrastructures Steel framing, False ceiling, Sandwich panels, ducting, decking, roofing, purlin, HVAC applications. White Goods Refrigerators, deeps freezers, washing machines, air coolers. Automotive Auto internal components, Bus bodies building. Containers Grain silos, trunk, drum & barrels, crash guards /handrails, buckets, gardening cans, milk containers, animal feeding pans, fish pan etc Galvanised Coil Specifications Galvanised as per IS 277 or equivalent grades like ASTM A 653, EN10327 Thickness (mm) : 0.10 to 3.00 mm (Galvanized) Width(mm) : 30 mm to 1420 mm Base metal : Cold rolled steel as per IS 513 Spangles : Regular/ Minimised /Suppressed / Zero (Skin pass). Leveling: With or without tension leveling. Passivation ; Chromated (Trivalent / Hexavalent) Oiling : non oiled, oiled 100 -450 GSM Yield strength (MPA) : 240, 360, 550 MPa Temper : Extra soft, Semi Hard, Full hard Hardness (HRB) : 35 TO 90 Grades : CQ, DQ, DDQ, EDDQ, HSLA. Coil weight (MT) : 8(Max) Winding : Controlled /staggered (+/-5 to +/- 15 mm)
Applications Building Roofing Transport Solar Energy Furniture. Home Appliances, such as the side door plate of refrigerators, shell of DVDs, air conditioners and washing machines. Specification JIS G 3312, ASTM A 755M, EN 10169 Thickness (mm) : 0.14 to 1.20 Width(mm) : 700-1520 mm Paint : As per RAL No or customer''s Color sample Yield strength (MPA) : 240,340 ,550. Paint : Polyester Coating Type : RMP, SMP, PVDF, SDP, Laminated, Wood Finish, Camouflage, Embossed. Back Coat : Epoxy
Applications Building Roofing Transport Solar Energy Furniture. Home Appliances, such as the side door plate of refrigerators, shell of DVDs, air conditioners and washing machines. Specification JIS G 3312, ASTM A 755M, EN 10169 Thickness (mm) : 0.14 to 1.20 Width(mm) : 00-1520 mm Paint : As per RAL No or customerâ??s Color sample Yield strength (MPA) : 240,340 ,550. Paint : Polyester Coating Type : MP, SMP, PVDF, SDP, Laminated, Wood Finish, Camouflage, Embossed. Back Coat : Epoxy
Surface Finish Super Bright, Bright, Dull & Matte. (RaValue with controlled Rmax on request). Specifications As per JIS/ BIS/ASTM/EN Standards Grades As per customer requirement Thickness Up to 3.00 mm Width From 50 mm to 1550 mm Sheet Length As per customer requirement
SS HR Coils can be supplied in | Grades : 200 , 300 and 400 series Thickness (mm) : 0.50 to 3.00 mm Widths (mm) : Up to 1250
Applications Constructions. Pipes and tubes. Truck frames. Automotive Doors and shelving. Railroad tracks. Railroad car parts. Thickness (mm) 1.20 to 25.4 Width (mm) 3000 max Sheet Length As per customer requirement Coil Weight 30 MT max Grade O, D, DD, EDD, IF, FE 410, SS400, Pipe Grade JISG 3132 SPHT, SAE 1006, SAE 1008 Specifications IS 2062, IS 1079, IS 10748, IS 5986 & Equivalent International Standards. ASTM A 36
SPECIFICATION: STEEL SHEET HRPO , CRCA, GI Sheet form , coil form, Rolls form Size: Customize
All Types Of Sheets And Coils And Wire Rod Products Are Available.
Aluminium Colour Coated Coils Thickness : 0.18 - 1.2 mm Width : 750 - 1250 mm Coil Weight : 3 - 5 MT Coil ID : 508 mm
We are a leading Manufacturer, Traders and supplier of galvanized steel sheet. Galvanization is the process of applying a protective zinc coating to steel or iron in order to prevent it from rusting. The term is derived from the name of Italian scientist Luigi Galvani. Galvanized iron (GI) sheets are steel sheets which are basically coated with zinc and include a range of hot dip galvanized and electro-galvanized steel sheets. Zinc weathers at a very slow rate, so the coating generally has a long life. Zinc has a greater electro-negativity than iron and hence provides cathodic (or sacrificial) protection to the steel. This results in the zinc corroding in preference to the steel if the coating is chipped or damaged to expose the base metal. Besides acting as galvanic protector, The other functions of the zinc layer are as follow: To retain the steel intact with its full initial strength. To provide the surface a more pleasing appearance. To increase the life of any suitable organic finishing system applied over it. To protect the steel from corrosive attack in most atmospheres, acting as a continuous and lasting shield between steel and the atmosphere. Features Uniform zinc coating in the range of 60-600 GSM Spangles: Zero / regular / minimized / suppressed Surface finish: Normal spangle, large spangle, small spangle, matte surface With and without tension leveling Passivation: Chromated (Hexavalent / Trivalent) Oiling: 100-1,000 GSM Winding: Controlled / staggered (+/- 5 to +/-15mm) Coil id: 508 / 610 mm Elongation: 16-33%. Dimensions Thickness: 0.18 - 3.2 mm Width: 800 - 1,500 mm Length: Up to 2,500 mm Grades & Standards CQ, DQ, DDQ, EDDQ, HSLA ASTM A653, SS33/37/40/50/60/80, EN 10327, JIS Commercial Steel (CS Types A, B, and C) Forming Steel (FS Types A and B) Deep Drawing Steel (DDS Types A and C) Extra Deep Drawing Steel (EDDS) Structural Steel (SS) further designated by Grades (33,37,40,50,80) High Strength Low Alloy Steel (HSLAS) Supply condition Coil / Slits/ Sheet form
Dimensions Thickness: 0.15-3.2 mm Width: 900 - 1,500 mm Length: Up to 2,500 mm Oiling: 100-1,000 GSM Winding: Controlled / staggered (+/- 5 to +/-15mm) Coil id: 508 / 610 mm Elongation: 16-33%. Grades & Standards CQ, DQ, DDQ, EDDQ, HSLA ASTM A653, SS33/37/40/50/60/80, EN 10327, JIS Commercial Steel (CS Types A, B, and C) Forming Steel (FS Types A and B) Deep Drawing Steel (DDS Types A and C) Extra Deep Drawing Steel (EDDS) Structural Steel (SS) â?? further designated by Grades (33,37,40,50,80) High Strength Low Alloy Steel (HSLAS) Supply condition Coil / Slits/ Sheet form
Dimensions PPGI and PPGL Type: Continuous Coil Color Coating Thickness (MM):0.18 TO 2.00 MM Width (MM):900 TO 1450 MM GSM: 70-250 Gsm Paint Coating thickness: 15-40microns Surface Finishes: Smooth, matt, high gloss, textures, printed Output Coil ID (MM):508mm / 610mm Output Coil OD (MM):1200 mm Output Coil Weight (MT):3-7 MT Type of Painting: EXPOXY,RMP (Regular Modified Polyester), SMP (Silicon Modified Polyester) HDP (High Durable Polyester), SDP (super Durable Polyester) PVDF (Poly Vinylidene Fluoride), PLASTISOL, PUPA/ARS, Anti-Bacterial, Wrinkle Finish /Anti Skidding Self-Cleaning / Anti Dust. Type of Material: HOT DIPPED â?? GALVANIZED steel (ZINC : 60-350 GSM) HOT DIPPED -ALU ZINC (ALUZINC 30-150) Grade:LFQ,SS,SGCC,CS,DX,HX Paint Coating:4-8 Microns primer + 15 TO 35 microns top Coat ( Four Coat System also available â?? Top & Bottom Side with Primer + Paint ) Supply conditions Coil / Sheet/ Slit / corrugated sheets / plain sheets / trapezoidal profiles Applications Construction and infrastructure: Industrial roofing and cladding, cold storage and warehouses, airports, atriums in malls, showrooms, false ceilings, lighting fixture White goods: Refrigerators, display freezers, washing machines, air conditioner wraps Automotive: Bus bodies, railway coaches, luxury coaches
Dimensions Thickness: 0.4-3.2mm (CRCA); 0.15-1.9mm (CRFH) Width: 800-1,625mm Material - Mild Carbon Steel Length - Can be cut to sheets according to requirement Max. Weight - 20MT per coil Grades Extra Deep Drawing steels (EDD, IF) IFHS (350, 400, 440) Bake hardening steel (BH180,220) HSLA (320, 340, 440) Semi-processed electrical steels Steels for enameling CORTEN ASTM: A 1008: DS type A & B, DDS, EDDS, EDDS+ IS: IS 513: D, DD, EDD DIN: DIN 17100: ST 37.3, ST 44.2, ST 44.3, ST 52.3 EN: EN 10268: HSLA 340, HSLA 420,EN 10130: DC 01, 03, 04, 05/06 JIS: G 3141: SPCD, SPCE, SPEN, SPRC 340/ 390,SPFC 340/ 390/ 440 Supply Condition: Coil / Slit / Sheet form Surface textures a. Smooth (plating applications) - suitable for electroplated articles and also for re-rolling when a matt texture is undesirable. A maximum surface roughness of 0,5 micrometers centre line average (CLA) is aimed for. Typical applications are car bumpers, door locks and other electroplated articles. b. Light matt (drawing and pressing applications)- surface roughness of 0.60 - 1,25 micrometers centre line average (CLA) and 100 peaks per inch (PPI) minimum is aimed for. Typical applications are automobile panels. c. Medium matt (drawing and pressing applications)- A surface roughness of 0,8 - 1,6 micrometers centre line average (CLA) and 100 peaks per inch (PPI) minimum is aimed for. Typical applications are drum bodies and ends.
Dimensions Thickness: 1.6 -25mm Width: 900-2,100mm Material - Mild Carbon Steel Max. Weight â?? 22 â?? 25 MT Grades Drawing quality steel: D / DD / EDD Cold rolling grades: IF (Interstitial Free) and High Strength IF Steels Medium carbon / high carbon steels High strength steels: JIS G 3113 SAPH310/370/400/440, JIS G 3134 SPFH-540/590, EN 10149-2 S550MC/S650MC, DP590 Line pipe â?? API X42 to X-80 grades (Sour and Non Sour Applications) Boilers and pressure vessels grades Ship building grades Corrosion resistant steel Re-rolling/ Drawing Grades, Tube and Pipe/ Forming Grades, Structural/ Medium Tensile Tube/ Forming Grades, LPG/ Low Pressure Vessel Grades, HSLA Grades, Medium Carbon Grades, Weather Resistance Grades, Line Pipe Grades, Chequered Plates ASTM (USA) : A 36 A572: Gr 42, Gr 50 IS (INDIA) : IS 2062: E250 Gr A/ B/ C, E350 Gr A/ B/ C DIN (GERMANY) : DIN 17100: ST 37.3, ST 44.2, ST 44.3, ST 52.3 BS (ENGLAND) : BS 4360: 40, 43, 50 EN (EUROPE) : EN 10025: S235, S275, S355 JIS (JAPAN) : G 3106: SM400, SM 490 G 3101: SS400, SS490
Cold Rolled Coils 0.25MM - 3MM
