All Types Of Sheets And Coils And Wire Rod Products Are Available.
Aluminium Colour Coated Coils Thickness : 0.18 - 1.2 mm Width : 750 - 1250 mm Coil Weight : 3 - 5 MT Coil ID : 508 mm
We are a leading Manufacturer, Traders and supplier of galvanized steel sheet. Galvanization is the process of applying a protective zinc coating to steel or iron in order to prevent it from rusting. The term is derived from the name of Italian scientist Luigi Galvani. Galvanized iron (GI) sheets are steel sheets which are basically coated with zinc and include a range of hot dip galvanized and electro-galvanized steel sheets. Zinc weathers at a very slow rate, so the coating generally has a long life. Zinc has a greater electro-negativity than iron and hence provides cathodic (or sacrificial) protection to the steel. This results in the zinc corroding in preference to the steel if the coating is chipped or damaged to expose the base metal. Besides acting as galvanic protector, The other functions of the zinc layer are as follow: To retain the steel intact with its full initial strength. To provide the surface a more pleasing appearance. To increase the life of any suitable organic finishing system applied over it. To protect the steel from corrosive attack in most atmospheres, acting as a continuous and lasting shield between steel and the atmosphere. Features Uniform zinc coating in the range of 60-600 GSM Spangles: Zero / regular / minimized / suppressed Surface finish: Normal spangle, large spangle, small spangle, matte surface With and without tension leveling Passivation: Chromated (Hexavalent / Trivalent) Oiling: 100-1,000 GSM Winding: Controlled / staggered (+/- 5 to +/-15mm) Coil id: 508 / 610 mm Elongation: 16-33%. Dimensions Thickness: 0.18 - 3.2 mm Width: 800 - 1,500 mm Length: Up to 2,500 mm Grades & Standards CQ, DQ, DDQ, EDDQ, HSLA ASTM A653, SS33/37/40/50/60/80, EN 10327, JIS Commercial Steel (CS Types A, B, and C) Forming Steel (FS Types A and B) Deep Drawing Steel (DDS Types A and C) Extra Deep Drawing Steel (EDDS) Structural Steel (SS) further designated by Grades (33,37,40,50,80) High Strength Low Alloy Steel (HSLAS) Supply condition Coil / Slits/ Sheet form
Dimensions Thickness: 0.15-3.2 mm Width: 900 - 1,500 mm Length: Up to 2,500 mm Oiling: 100-1,000 GSM Winding: Controlled / staggered (+/- 5 to +/-15mm) Coil id: 508 / 610 mm Elongation: 16-33%. Grades & Standards CQ, DQ, DDQ, EDDQ, HSLA ASTM A653, SS33/37/40/50/60/80, EN 10327, JIS Commercial Steel (CS Types A, B, and C) Forming Steel (FS Types A and B) Deep Drawing Steel (DDS Types A and C) Extra Deep Drawing Steel (EDDS) Structural Steel (SS) â?? further designated by Grades (33,37,40,50,80) High Strength Low Alloy Steel (HSLAS) Supply condition Coil / Slits/ Sheet form
Dimensions PPGI and PPGL Type: Continuous Coil Color Coating Thickness (MM):0.18 TO 2.00 MM Width (MM):900 TO 1450 MM GSM: 70-250 Gsm Paint Coating thickness: 15-40microns Surface Finishes: Smooth, matt, high gloss, textures, printed Output Coil ID (MM):508mm / 610mm Output Coil OD (MM):1200 mm Output Coil Weight (MT):3-7 MT Type of Painting: EXPOXY,RMP (Regular Modified Polyester), SMP (Silicon Modified Polyester) HDP (High Durable Polyester), SDP (super Durable Polyester) PVDF (Poly Vinylidene Fluoride), PLASTISOL, PUPA/ARS, Anti-Bacterial, Wrinkle Finish /Anti Skidding Self-Cleaning / Anti Dust. Type of Material: HOT DIPPED â?? GALVANIZED steel (ZINC : 60-350 GSM) HOT DIPPED -ALU ZINC (ALUZINC 30-150) Grade:LFQ,SS,SGCC,CS,DX,HX Paint Coating:4-8 Microns primer + 15 TO 35 microns top Coat ( Four Coat System also available â?? Top & Bottom Side with Primer + Paint ) Supply conditions Coil / Sheet/ Slit / corrugated sheets / plain sheets / trapezoidal profiles Applications Construction and infrastructure: Industrial roofing and cladding, cold storage and warehouses, airports, atriums in malls, showrooms, false ceilings, lighting fixture White goods: Refrigerators, display freezers, washing machines, air conditioner wraps Automotive: Bus bodies, railway coaches, luxury coaches
Dimensions Thickness: 0.4-3.2mm (CRCA); 0.15-1.9mm (CRFH) Width: 800-1,625mm Material - Mild Carbon Steel Length - Can be cut to sheets according to requirement Max. Weight - 20MT per coil Grades Extra Deep Drawing steels (EDD, IF) IFHS (350, 400, 440) Bake hardening steel (BH180,220) HSLA (320, 340, 440) Semi-processed electrical steels Steels for enameling CORTEN ASTM: A 1008: DS type A & B, DDS, EDDS, EDDS+ IS: IS 513: D, DD, EDD DIN: DIN 17100: ST 37.3, ST 44.2, ST 44.3, ST 52.3 EN: EN 10268: HSLA 340, HSLA 420,EN 10130: DC 01, 03, 04, 05/06 JIS: G 3141: SPCD, SPCE, SPEN, SPRC 340/ 390,SPFC 340/ 390/ 440 Supply Condition: Coil / Slit / Sheet form Surface textures a. Smooth (plating applications) - suitable for electroplated articles and also for re-rolling when a matt texture is undesirable. A maximum surface roughness of 0,5 micrometers centre line average (CLA) is aimed for. Typical applications are car bumpers, door locks and other electroplated articles. b. Light matt (drawing and pressing applications)- surface roughness of 0.60 - 1,25 micrometers centre line average (CLA) and 100 peaks per inch (PPI) minimum is aimed for. Typical applications are automobile panels. c. Medium matt (drawing and pressing applications)- A surface roughness of 0,8 - 1,6 micrometers centre line average (CLA) and 100 peaks per inch (PPI) minimum is aimed for. Typical applications are drum bodies and ends.
Dimensions Thickness: 1.6 -25mm Width: 900-2,100mm Material - Mild Carbon Steel Max. Weight â?? 22 â?? 25 MT Grades Drawing quality steel: D / DD / EDD Cold rolling grades: IF (Interstitial Free) and High Strength IF Steels Medium carbon / high carbon steels High strength steels: JIS G 3113 SAPH310/370/400/440, JIS G 3134 SPFH-540/590, EN 10149-2 S550MC/S650MC, DP590 Line pipe â?? API X42 to X-80 grades (Sour and Non Sour Applications) Boilers and pressure vessels grades Ship building grades Corrosion resistant steel Re-rolling/ Drawing Grades, Tube and Pipe/ Forming Grades, Structural/ Medium Tensile Tube/ Forming Grades, LPG/ Low Pressure Vessel Grades, HSLA Grades, Medium Carbon Grades, Weather Resistance Grades, Line Pipe Grades, Chequered Plates ASTM (USA) : A 36 A572: Gr 42, Gr 50 IS (INDIA) : IS 2062: E250 Gr A/ B/ C, E350 Gr A/ B/ C DIN (GERMANY) : DIN 17100: ST 37.3, ST 44.2, ST 44.3, ST 52.3 BS (ENGLAND) : BS 4360: 40, 43, 50 EN (EUROPE) : EN 10025: S235, S275, S355 JIS (JAPAN) : G 3106: SM400, SM 490 G 3101: SS400, SS490
Cold Rolled Coils 0.25MM - 3MM
S S SHEET , S.S. BARS , S.S. COIL, S.S. PLATE
CT coils available for all single & 3 phase Energy meters CT 5/30AMPERE CT 10/60AMPERE CT 10/80 AMPERE CT 100 AMPERE
GA CIRCLE Thickness : 0.50 mm Dia Met : 512 mm
PRIME ELECTRO GALVANIZED COILS Thickness : 1.00 mm to 3.00 mm Width : 914 mm to 1524 mm
Steel Coils
Steel Products with all types of specifications, grades and specified dimensions with required tolerance limit. Hot Rolled Coil (HRC) & Cold Rolled Coil (CRC) Rolled Coils used in industrial and commercial application are available in various thickness range.
Steel Coils, PPGI, PPGL, GI, GL,CRC, Steel Strips, Steel Sheets. We sell steel coils, GI PPGI GL PPGL CRC ,Steel strips, Steel sheets, Tinplate, Aluminum Coils. 1. GI Thckness : 0.3mm x 3.0mm width : 1000mm 1250mm 1500mm Zinc coating : 60g -275g/m2 surface to regular spangle zero spangle Grade : SGCC DX51D DC51D 2. PPGI Thickness : 0.2mm -1.5mm width: 800mm -1250mm Prepainted coating for up 18-25 micron back 5-7 micron Standard with JIS ASTM EU GB 3. GL ( aluminum-zinc ) component : 55% al 43.5% zinc 1.5%silicon Thickness : 0.3mm - 1.5mm width : 600mm-1250mm AZ coating : AZM 80- AZM 180/M2 Standard with JIS ASTM GB 4. PPGL same to GL Above the color br Ral color card better 5. CRC Thickness: 0.2mm -3.0mm width : 600mm 1219mm 1250mm 1500mm Grade : SPCC SPCD DC01 DC02 DC03 ST12 ST13 What about your size and quantity
Cold Rolled Stainless Steel Coil Our main grade include: 200Series: 201 202 300Series: 301 304/304L 316/316L 400Series: 409 410 410S 420 420J1/J2 430 Width: 100mm-1250mm Thickness: 0.2mm-3.0mm Surface finished: BA 2B HL 8K NO.1 etc. Meanwhile, we also have our own process factory provide colored and decorative stainless steel sheets including Hair Line, No.4 Brushed surface/Satin, Vibration finishes, Bead blast finishes, matte finishes, #8 Mirror Finishes, PVD Coating/Colored, Embossed and Etching finishes. Our competitiveness is customer size. any special size is available. we would like to make friends with business partners from everywhere of the world. Looking forward to your attention and early reply. We will quote you the best price.
PPGI,GI, Prepainted Galvanized Steel in Coils,PPGL,GL,EG,GA,Color Coated Steel Coils,CCLI we are manufacturer for iron/steel coil, galvanized plate, iron/steel sheets, iron/steel plates, color coated iron/steel plate ,GI,GA,EG,PPGL,CL,CCLI and PPGI etc., which used for shell/plate of electric appliances, cooking equipments ,medical equipmentsï¼?building purpose, decoration area, gate, solar energyand others.Material,painting and dimension can be customized. Our products served 100+ companies in China.Please contact
Factory Price Prepainted Galvanized Steel Coil Gi Ppgi Coils Standard:AISI, ASTM, BS, DIN, GB, JIS Grade:DX51D Thickness:0.12-1.2mm Coil Weight:3-5tons Effective width:600mm-1250mm Coil ID:508/610mm Base Material:Cold rolled steel coils Steel zinc range:30-275g/m2 Hardness:Soft-full Hard
Plastic stirrups Color:- blue, black,white,red,orange,pink,green, etc Size:-42,44,46,48,50,52,54 Materials:- made up from PVC and plastic 50 pairs in a carton of dimension:- 53x53x21 cms or as per our buyer requirement for custom packaging if necessary according to demands. delivery in 15-30 days or it may be vary due to effects of COVID-19 pandemic.
SPECIFICATION: STEEL SHEET HRPO , CRCA, GI Sheet form , coil form, Rolls form Size: Customize
