HEXANE purity wt% ppm Saybolt - ppm ppm - 99.0 - - 64 70 - +30 0.670 - - Clear - 80 - 0.686 5.0 200 - Benzene content Distillation range IBP DP Color Specific gavity (15/15) Sulfur content Water content 8 Appearance
Hydrocarbons Solvents, SOLVENT NAPHTHA Distillation Range -Initial Boiling Point -Final Boiling Point 150 180 â?? ASTM D 86 ASTM D 93 ASTM D 611 EC-A-G04 Visual ASTM D 4052 ASTM D 3120 â?? 37 12 99 0.860 160 182 41 13 99 0.860 2 165 200 15 0.870 â?? Wt% Clear colourless free from foreign particles Flash Point Sulphur These are values indicated are typical values only representing the value in our laboratory with our test methods performed on representatives sample and not on actual product supplied. ppm Mixed Aniline Point Aromatic Content Colour Specific Gravity Unit Minimum Value Maximum Value Typical Value Test Method P
Appearance Clear & Bright Rel. Density @ 15.56C - Visual - - 0.8703 Copper corrosion ASTM D 849 - 1a Flash Point IP 170 C 3 Density @ 20C ASTM D 4052 Kg/L 0.8662 Non Aromatics ASTM D 2360 Wt% 0.05a Colour ASTM D 1209 - LT 5 Distillation Range C IBP ASTM D 850 110.8 DP 110.8 Characteristic (Test) Test Method Unit Specification Water content ASTM E 1064 Wt% 0.02
Hydrocarbons Solvents XTest Description Specification Limits Min. Max. Unit of Measure ASTM Test Method Appearance Clear Visual Purity as Aromatic 99.9 Vol. % ASTM D 1319 Saybolt Colour +30 ASTM D 156 Density at 15deg.C Kg/dm3 ASTM D 4052 Distillation Range Deg.C ASTM D 850 IBP 137.8 50% 139.6 DP 142.6 Flash Point 27.5 Deg.C ASTM D 56 Aniline Point Not Listed Deg.C ASTM D 611 Copper Corrosion 1a ASTM D 130 3hrs. at 50 deg.c Sulphur Content Free ppm/wt ASTM D853 Aromatics 99.9 Vol.% ASTM D 1319 Hydrogen Sulphide Free ppm/wt ASTM D 853 ylene
Test Description Specification Limits Min. Max. Unit of Measure ASTM Test Method Appearance Clear Visual Purity as Aromatic 99.9 Vol. % ASTM D 1319 Saybolt Colour +30 ASTM D 156 Density at 15deg.C Kg/dm3 ASTM D 4052 Distillation Range Deg.C ASTM D 850 IBP 137.8 50% 139.6 DP 142.6 Flash Point 27.5 Deg.C ASTM D 56 Aniline Point Not Listed Deg.C ASTM D 611 Copper Corrosion 1a ASTM D 130 3hrs. at 50 deg.c Sulphur Content Free ppm/wt ASTM D853 Aromatics 99.9 Vol.% ASTM D 1319 Hydrogen Sulphide Free ppm/wt ASTM D 853
Acetone Methly Ethyl Ketone (MEK) Methyl Isobuty Ketone (MIBK) Cyclohexano
Propylene Glycol (MPG-99.5%) TDS | MSDS Mono Ethylene Glycol TDS | MSDS Tri Ethylene Glycol MSDS Diethylene Glycol (DEG) TDS | MSDS Others Alcohol Ester TDS | MSDS Plasticizers DBP TDS | MSDS DOP TDS | MSDS Esters Ethyl Acetate Iso Butyl Acetate TDS | MSDS Iso Propyl Acetate TDS | MSDS N-Propyl Acetate TDS | MSDS N-Butyl Acetate TDS | MSDS Methyl Acetate TDS | MSDS Glycol Ethers Butyl Glycol Ether (BGE) TDS | MSDS Methoxy Propanol TDS | MSDS Methoxy Propyl Acetate TDS | MSDS EGA TDS | MSDS
Butanol (Technical Grade) PRODUCT CODE 2051 DESCRIPTION C4/C5 alcohol distillation cut. Appearance ASTM E2680 Colour Pt-Co Clear and bright 5 max ASTM D1209; ASTM D5386 Water mass % 0.10 max ASTM D1364 n-Butanol mass % 60.0 min GC sec-Pentanol mass % 20.0 max GC Total alcohols mass % 99 min GC Carbonyls as propionaldehyde mass % 0.30 max B124 Properties Units Limits Test Methods Density at 20â?? 0.808-0.811 ASTM D4052 Distillation at 101.3 kPa: Initial boiling point Dry point â?? g/ml 115 â?? 118 ASTM D1078 Iso-butanol mass % 12 GC Further Properties Units Typical values Test Methods The sales Specification values are continuously checked, documented and stored within the scope of Quality assurance Further properties are of an informational nature only and are not checked regularly. If the Sales Specifications are complied with; it can generally be assumed that all further properties and typical data Conform to the values given.
It is high molecular weight polyester resin with ability to form Nano particle sized dispersion in water. It is an exclusive product for weaving of me d i um t o finer denier multi-filament polyester yarn & denser sorts on medium to high speed Waterjet loom, Rapier loom & medium speed Airjet loom. It can replace Acrylic size & PVA Appearance- Greenish/ Yellowish/ Off white Physical Form- Solid granules Diluent -DM or RO Water Solid content -98 + 2% Nature- Anionic
CNSL Mortar Cashew CNSL Resin Mortar is widely used for Acid Resistant Bricks/ Tiles lining as bedding and jointing mortar. It can be used for jointing Chemical Resistant Stoneware Pipes. It is also used for ETP Plants. It is suitable where excellent resistant property and heavy impacts subjected to the surface of floors and tank is required. Cashew CNSL mortar adheres strongly on the Ceramic, Concrete surface and metals so, it can be used as a monolithic lining for the construction of dilute acids storage tanks. Resistant It is resistant to Acids, Alkalies, mixed alkaline solutions with acids. Resistant to temperature 170�° C (Max.) Preparation of Mortar Preparation of Mortar generally consists of Solution & Powder. In order to obtain good working consistency, the average mixing ratio is 1 Pbw of Solution & 3 pbw of Powder. This ratio will slightly vary depending upon the temperature and working conditions. Prepare small batches of Mortar. Stirrer the Solution thoroughly before use. Place the Solution in a suitable mixing pan and add powder in it. Mix thoroughly with a spatula or Trowel. The mixing operation shall be continued until a uniform mixture is obtained. Make sure that all the Mortar is used from the mixing pan before another batch is prepared. Surface Preparation The cement plastered surface shall be slightly rough in line & level , dry & clean, free from dust, dirt, grease, oil etc., maintaining required slope etc. as no slope can be adjusted or altered in Acid proof lining works. Setting / Curing Cashew CNSL Resin Mortar is a Self-hardening due to its chemical reaction which occurs when the Powder & Resin are mixed together. An initial setting occurs in 10 hrs. at 30�°C Final Setting occurs in 24 to 48 hrs. at 30�°C Curing time: 7 days at 30�°C Please ensure that no water shall be spilled over the bricks lining works before it completely cured. Storage Life Solution: 12 Months at the temperature 30�°C (+2OC) Powder: 6 Months at the temperature 30�°C (+2OC) All two components are stored in cool and dry place under the roof until ready to use it original unopened (Sealed) containers. Packing Solution: 25 Kg. in M.S. Drum Powder: 25 Kg. in Plastic Bag.
Identification Chemical substance: short oil alkyd resin short coconut Specifications Solids content: 70%(� 1%) Color - gardner scale : 2 max (50% solution) Acid number: 10 max.(mg koh/g - solids) Viscosity: 10 max.(mg koh/g - solids) 10-15 poise at 50%(25) Main characteristics oil type: c 12 fatty acid Solvent: mixed xylene Standard applications - nc systems - coating for metal - force air drying - oven drying - primer - top coat
Short Oil Alkyd Resin, which find application in nitrocellu-lose based automotive refinishes as a plasticizer and as a binder for stoving finishes in combination with butylated melamine formaldehyde resin. Key Specifications/Special Features "Solid content: 70± 2% Color â?? Gardner Scale: 2 max (50% solution in Xylene) Acid Number: 15 max.(mg KOH/g â?? solids) Viscosity: 10 â?? 15 Poise at 25°C in 50% Xylene." Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 200 KG BARREL
Product Description : A medium oil alkyd resin is a alkyd binder made with a medium oil to alkyd resin ratio. Price of product ( USD price or FOB price) : $ 1441/MT Product origin : INDIA Key Specifications/Special Features : Solids content: 40� 2% Color - Gardner Scale: 4 max. Acid number: 12 max.(mg KOH/g) Viscosity(at 33% in MTO) : 45-65 seconds in FC4 at 30�1�C Minimum Order Size/ Packgaing details : 1 FCL (20MT)/ 190 KG Barrel
Product Description : NON REACTIVE POLYAMIDE (AKROSYN 9065) Price of product ( USD price or FOB price) : It is a polymeric fatty acid based co solvent soluble Non Reactive Polyamide resin. It is suitable for flexographic and gravure printing inks and over printing lacquers. It is soluble in N-propanol, Iso propanol, N –butanol and mixture of these with aromatic hydrocarbon like toluene and xylene. Product origin : 2059 Key Specifications/Special Features : INDIA Minimum Order Size/ Packgaing details : Appearance : Yellowish Brownish Color - Gardner Scale 10 max. (40% solution in Toluene/Butanol/IPA 1:1:1) Acid Value: 7 max.(mg KOH/g) Amine Value: 7 max.(mg KOH/g) Viscosity @30±1°C B4 Cup 50 – 60 seconds (40% solution in Toluene/Butanol/IPA.1:1:1) Softening Point(B&R) 105 -115 °C
Product Description ; A medium oil alkyd resin is a alkyd binder made with a medium oil to alkyd resin ratio. Price of product ( USD price or FOB price) : $ 1456/MT Product origin : INDIA Key Specifications/Special Features ; Solids content: 70� 2% Color - Gardner Scale: 7 max(50% solution) Acid number: 15 max.(mg Viscosity(at 40%in MTO) : 70 - 90 seconds in FC4 at 30±1°C Minimum Order Size/ Packgaing details: 1 FCL (20MT)/ 190 KG BARREL
Product Description : Short�Oil�Alkyd�Resin, which find application in nitrocellu-lose based automotive refinishes as a plasticizer and as a binder for stoving finishes in combination with butylated melamine formaldehyde resin. Price of product ( USD price or FOB price) : $ 1338/MT Product origin INDIA Key Specifications/Special Features Solids content: 70� 2% Color Gardner Scale 4 max(50% solution in Xylene) Acid number: 20 max.(mg KOH/g - solids) Viscosity: 140 -160 seconds at 30�1�C in B4 Cup 50%in Xylene Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 200 KG Barrel
Product Description: Short Oil Alkyd Resin, which find application in nitrocellu-lose based automotive refinishes as a plasticizer and as a binder for stoving finishes in combination with butylated melamine formaldehyde resin. Origin: INDIA Key Specifications: "Solid content: 70± 2% Color â?? Gardner Scale: 2 max (50% solution in Xylene) Acid Number: 15 max.(mg KOH/g â?? solids) Viscosity: 10 â?? 15 Poise at 25°C in 50% Xylene." Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 200 KG BARREL
Product Description: Iso Cyanate modified single pack Polyurethane Alkyd having excellent gloss,hardness, mar resistance, stain and water resistance.Recomended for wood lacquer also in pigmented air drying top coat Origin: INDIA Key Specifications: "Solids content: 50± 2% Color - Gardner Scale 4 max. Acid number: 5 max.(mg KOH/g) Viscosity: 45-75 seconds in FC4 at 30±1°C(45% solid in MTO) Surface Dry 45 mins max @30°C Hard Dry 2 â?? 3 hours @30°C" Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 180 KG BARREL
Product Description: Short Oil DCO Alkyd Resin Origin: INDIA Key Specifications: "Solids content: 70± 2% Color - Gardner Scale 6 max. (50% Solution) Acid number: 20 max.(mg KOH/g) Viscosity: 140-160 seconds at 30±1°C in B4 Cup 50% in Xylene" Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 200 KG BARREL
Product Description : A medium oil alkyd resin is a alkyd binder made with a medium oil to alkyd resin ratio. Price of product ( USD price or FOB price) : 1456 Product origin : India Key Specifications/Special Features : Solids content: 70± 2% Color - Gardner Scale: 7 max(50% solution) Acid number: 15 max.(mg KOH/g) Viscosity(at 40%in MTO) : 70 - 90 seconds in FC4 at 30±1°C Minimum Order Size/ Packgaing details : 1 FCL (20MT)/ 190 KG Barrel
