Odour : odourless Texture : soft dry powder Volatile matter, % by mass : 0.22 Purity as tio2, % by mass : 98.89 Matter soluble in water, % by mass : 0.31 Residue on 45 micron is sieve, % by mass : 0.058 Ph of pigment slurry : 7.70 Oil absorption, % by mass : 23.0 Color in oil : match Reducing power : match 25 kg - hdpe bags / paper bags 500 kg/1000 kg - jumbo bags
Odour & texture : odourless, soft dry powder Tio2 content, % : 98.0 min. Specific gravity (g/cm3) : 3.9 – 4.2 Mass tone : close match to the approved sample Reducing tone : close match to the approved sample Tinting strength : 1500 min. Tinctorial power-reynolds number : 1710 min. Oil absorption (g/100g) : 20.0 max. Ph of the pigment (20% slurry) : 6.00 – 8.00 Matter soluble in water, % : 0.5 max. Residue on 45 micron sieve, % : 0.10 max. Volatile at105o c, % : 0.5 max. Surface treatment : organic treated 25 kg - hdpe bags with liner / paper bags - palletized & stretch wrapped 500 kg / 1000 kg - jumbo bags - palletized & stretch wrapped
Grade : 2, 5, 7, 9 Size: all size
This stylish ring features a brushed center band with high polishbeveled edges. It is crafted of light weight titanium. Material: titanium Features: scratch-resistant light weight titanium Finish: high polish, brushed Band dimensions: 8 mm wide x 2.3 mm thick Metal weight: 5 grams Styling : flat top, beveled edge, comfort fit Comfort-fit band: contoured on the inner surface for a more comfortable fit, comfort-fit bands run approximately .05 size larger than other rings. The next smaller size is suggested.
We have 10 tons of titanium. The purity of titanium is 99.70%. 1.5 ft long and 3 ft breadth.
Sheet and Plates Specifications 1)hot and coll rolled, Gr1~Gr23 2)Thickness:0.3mm - 60mm 3)Length:6000mm 4)ASTM B265,ASTM 4911,F67,F136 Material :titanium and titanium alloys Pure Titanium Grade : GR1, GR2, GR3, GR4 Titanium Alloy Grade : GR5 (6% Al, 4%V) GR6 (5% AL, 2.5%Sn) Gr.7 (Titanium + Pd) Gr.9 (3% Al, 2.5%V) Gr.10 (11.5%Mo, 6% Zr, 4.5% Sn) Gr.11 (Titanium + Pd) Gr.12 (0.3% Mo, 0.8% Ni)
Grades : Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, Grade 7, Grade 9, Grade 23 Type: Seamless / Erw / Welded/ Fabricated Range : 15 NB UP TO 600 NB IN SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 etc. Form Round, square, rectangular, hydraulic etc. Length Single Random, Double Ranidom & Cut Length End Plain End, Bevelled End, Treaded
Specifications : Titanium round bar Grade: Gr1, Gr2, Gr3, Gr5, Gr7 Standard: ASTM B348, ASTM F136, ASTM F67, AMS 4928 Specification: 1. Grade : Gr1, Gr2, Gr4 ,Gr5,Ti-6AL4V ELI,Gr.7, Gr.9, Gr.12 2. Standard : ASTM B348, ASTM F136, ASTM F67, AMS 4928 3. Size: Diameter : 4mm to 350mm, Length: 50mm to 6000mm 4. Payment : T/T or L/C at sight 5. MOQ : 10 kg 6. Package : Ply wooden case or as request 7. Delivery time : 7- 30 days after confirmed 8. Applications: industry, glasses so on
Svamitva Steel is one of the largest exporter, manufacturer and supplier of Titanium Grade 2 sheets. The lightweight, corrosion resistance and high strength of our Titanium Grade 2 Sheets this grade to be used in a lot of applications. This grade is an excellent combination of strength, corrosion resistance.
Titanium coiles are best offered and exchanged by Preston Pipes and Alloys. They are the remarkable alliance giving the sheets, plates, and turns from the titanium grade 5 blends. It is the best blend in the class of the tempered steel as this is considered as the most premium quality harsh material. The mix utilized genuinely working out as expected of these plates is having fine structure and Provides fine zenith in the wake of machining. The plates as such are giving the Hard-wearing limit, despite how these plates are much lightweight. These plates, sheets, and circles are having Soaring moldable quality as they can be extended and compacted up to much degree with no breakage or distortion. This thing is having higher quality and hardness and subsequently addresses progressively undeniable durability. They are set up in the fortified condition and as necessities be accomplish progressively recognizable adaptability at high temperature and weight. This composite is Ductile in nature and accordingly the plates, sheets, and winds can be shown in various estimations and shapes. We at Preston Pipes and Alloys are additionally appearing custom structure things for the utilization of the client's needs. This amalgam is in like way having Good deficiency and break confinement and the plates and sheets encompassed don't confront any part and setting, this is likewise by prudence of turns and different things. The Preston Pipes and Alloys are passing on the things with fine quality and logically basic capacity. We are in this business of progress for a long time and are giving our clients the delight in utilizing the finely assembled mechanical thing with much dependence and trust. We are giving the Titanium Alloy Gr 5 Sheets, Plates, Coils at truly sensible costs which are completely palatable to our clients. You can control us through our site or the contact support. We give the 24x7 contact sponsorship to the request of our clients.
Fully Washed Original Titanium Sheets or Plates
Principal Design Features This is the most commonly used and widely available grade of unalloyed titanium. The grade combines excellent corrosion resistance and weldability with good strength, ductility and formability. Beta Transus (F +/- 25) 1675. Types Titanium Gr.2 With moderate strength and excellent corrosion resistance and formability, Grade 2 titanium represents the most widely used form of titanium. Compared to the other grades of commercially pure titanium, Grade 2 titanium is slightly weaker than Grade 3, but stronger than Grade 1 and equally resistant to corrosion. These properties account for Grade 2 titanium's versatility in regard to its applications.
Titanium tubes come in various grades, each with specific properties suited to different applications. Titanium alloys are known for their excellent strength-to-weight ratio, corrosion resistance, and biocompatibility, making them ideal for a wide range of industries, including aerospace, medical, chemical processing, and marine. Here are some common grades of titanium tubes: Grade 1 (UNS R50250): Commercially pure titanium with excellent corrosion resistance, high ductility, and good weldability. Grade 1 titanium tubes are often used in applications where corrosion resistance and formability are essential, such as chemical processing equipment, heat exchangers, and marine components. Grade 2 (UNS R50400): Commercially pure titanium with slightly higher oxygen content than Grade 1, resulting in improved formability and moderate strength. Grade 2 titanium tubes are widely used in aerospace, marine, and medical applications, as well as in heat exchangers, piping systems, and condensers. Grade 5 (Ti-6Al-4V, UNS R56400): An alpha-beta titanium alloy containing 6% aluminum and 4% vanadium, offering excellent strength, toughness, and corrosion resistance. Grade 5 titanium tubes are commonly used in aerospace, automotive, and biomedical applications, as well as in high-performance sports equipment and marine components. Grade 9 (Ti-3Al-2.5V, UNS R56320): An alpha-beta titanium alloy containing 3% aluminum and 2.5% vanadium, providing a good balance of strength, weldability, and corrosion resistance. Grade 9 titanium tubes are often used in aerospace structures, bicycle frames, and marine components where high strength and corrosion resistance are required. Grade 12 (Ti-0.3-Mo-0.8Ni, UNS R53400): An alpha-beta titanium alloy containing 0.3% molybdenum and 0.8% nickel, offering excellent corrosion resistance in oxidizing and reducing environments. Grade 12 titanium tubes are commonly used in chemical processing, desalination plants, and marine applications where resistance to chlorides and seawater is critical. Grade 23 (Ti-6Al-4V ELI, UNS R56401): An extra-low interstitial version of Grade 5 titanium with enhanced fracture toughness and biocompatibility, suitable for medical implants and surgical instruments. These are some of the commonly used grades of titanium tubes. The selection of the appropriate grade depends on factors such as mechanical properties, corrosion resistance, temperature requirements, and cost considerations. It's important to consult with suppliers or engineers to choose the right grade for your specific application needs.
Titanium dioxide has been used for a century in a range of industrial and consumer products, including paints, coatings, adhesives, paper, plastics and rubber, printing inks, coated fabrics and textiles, as well as ceramics, floor coverings, roofing materials, cosmetics, toothpaste, soap, water treatment agents For more details please contact us
Product description, including the following details - At our company, we always try to give the best quality Titanium Dioxide. We are known as the finest exporter in the market. We believe in providing and delivering the best services within the discussed time. We give a personalized touch to our services to create better relationships with our customers. Price of product - Price will decide at the time of Inquiry Bcoz it is depend on Quantity Requirement and Market Situation Key Specifications/Special Features - Titanium Dioxide Inorganic Salt, Agro Intermediate, Agriculture Fertilizers, Crop, Solvent, Food Ingredients, Fertilizers, Textile Chemical, Water Soluble Fertilizer, Agrochemicals, Inorganic Chemicals
We are an Exports of all types of Titanium Dioxide, ilmenite from China. Grades we have Description 1. JTR-719 is an excellent general-purpose titanium dioxide produced by the sulfuric acid method. 2. JTR-739 is titanium dioxide produced by sulfuric acid method, which has excellent optical properties and weather resistance. 3. JTR-759 is a rutile titanium dioxide produced by the sulfuric acid method, which is specially designed for the printing ink industry. 4. JTR-799 is titanium dioxide produced by sulfuric acid method, suitable for high concentration master batch and plastics. 5. JTCR-539 is a coating grade titanium dioxide produced by the chlorination method. Applicable to all kinds of coatings. 6. JTCR-599 is a rutile titanium dioxide produced by the chlorination method, which is suitable for all kinds of plastics. 7. B101 is an anatase titanium dioxide, which is highly recommended for coatings, inks, paper, plastics, rubber, and chemical fibers. 719 - General Grade 719T - Premium Grade 519 - Chloride Grade
We are an Exports of all types of Titanium Dioxide, ilmenite from China. Grades we have Description 1. JTR-719 is an excellent general-purpose titanium dioxide produced by the sulfuric acid method. 2. JTR-739 is titanium dioxide produced by sulfuric acid method, which has excellent optical properties and weather resistance. 3. JTR-759 is a rutile titanium dioxide produced by the sulfuric acid method, which is specially designed for the printing ink industry. 4. JTR-799 is titanium dioxide produced by sulfuric acid method, suitable for high concentration master batch and plastics. 5. JTCR-539 is a coating grade titanium dioxide produced by the chlorination method. Applicable to all kinds of coatings. 6. JTCR-599 is a rutile titanium dioxide produced by the chlorination method, which is suitable for all kinds of plastics. 7. B101 is an anatase titanium dioxide, which is highly recommended for coatings, inks, paper, plastics, rubber, and chemical fibers. 719 - General Grade 719T - Premium Grade 519 - Chloride Grade
We are an Exports of all types of Titanium Dioxide, ilmenite from China. Grades we have Description 1. JTR-719 is an excellent general-purpose titanium dioxide produced by the sulfuric acid method. 2. JTR-739 is titanium dioxide produced by sulfuric acid method, which has excellent optical properties and weather resistance. 3. JTR-759 is a rutile titanium dioxide produced by the sulfuric acid method, which is specially designed for the printing ink industry. 4. JTR-799 is titanium dioxide produced by sulfuric acid method, suitable for high concentration master batch and plastics. 5. JTCR-539 is a coating grade titanium dioxide produced by the chlorination method. Applicable to all kinds of coatings. 6. JTCR-599 is a rutile titanium dioxide produced by the chlorination method, which is suitable for all kinds of plastics. 7. B101 is an anatase titanium dioxide, which is highly recommended for coatings, inks, paper, plastics, rubber, and chemical fibers. 719 - General Grade 719T - Premium Grade 519 - Chloride Grade
We are an Exports of all types of Titanium Dioxide, ilmenite from China. Grades we have Description 1. JTR-719 is an excellent general-purpose titanium dioxide produced by the sulfuric acid method. 2. JTR-739 is titanium dioxide produced by sulfuric acid method, which has excellent optical properties and weather resistance. 3. JTR-759 is a rutile titanium dioxide produced by the sulfuric acid method, which is specially designed for the printing ink industry. 4. JTR-799 is titanium dioxide produced by sulfuric acid method, suitable for high concentration master batch and plastics. 5. JTCR-539 is a coating grade titanium dioxide produced by the chlorination method. Applicable to all kinds of coatings. 6. JTCR-599 is a rutile titanium dioxide produced by the chlorination method, which is suitable for all kinds of plastics. 7. B101 is an anatase titanium dioxide, which is highly recommended for coatings, inks, paper, plastics, rubber, and chemical fibers. 719 - General Grade 719T - Premium Grade 519 - Chloride Grade
We are an Exports of all types of Titanium Dioxide, ilmenite from China. Grades we have Description 1. JTR-719 is an excellent general-purpose titanium dioxide produced by the sulfuric acid method. 2. JTR-739 is titanium dioxide produced by sulfuric acid method, which has excellent optical properties and weather resistance. 3. JTR-759 is a rutile titanium dioxide produced by the sulfuric acid method, which is specially designed for the printing ink industry. 4. JTR-799 is titanium dioxide produced by sulfuric acid method, suitable for high concentration master batch and plastics. 5. JTCR-539 is a coating grade titanium dioxide produced by the chlorination method. Applicable to all kinds of coatings. 6. JTCR-599 is a rutile titanium dioxide produced by the chlorination method, which is suitable for all kinds of plastics. 7. B101 is an anatase of titanium dioxide, which is highly recommended for coatings, inks, paper, plastics, rubber, and chemical fibers. 719 - General Grade 719T - Premium Grade 519 - Chloride Grade We are looking forward to working with you, and we offer you standard best quality and best prices of Titanium Dioxide For more details please reply. Please response our email so we can provide you Technical Data Sheet and Prices CIF or CFR and Samples if required
