A forged cap is a type of pipe fitting that is used to close off the end of a pipe. It is made by forging, a process that involves heating the metal and then shaping it under pressure. This makes the forged cap strong and durable. The technical specifications of a cap will vary depending on the material it is made from, its size, and its intended application. However, some common specifications include: Material: Carbon steel, stainless steel, alloy steel, copper, brass, etc. Size: 1/2 inch to 4 inches in diameter Pressure rating: 100 psi to 2000 psi Thread type: NPT, BSPT, BSPP, etc. Finish: Galvanized, hot dipped galvanized, epoxy coated, etc.
A Forged Round Head Plug is a type of pipe fitting that is used to block the flow of fluid through a pipe. It is made of a solid piece of metal that is forged into the desired shape. The head of the plug is round and has a threaded bore that allows it to be screwed into a pipe. The following are the product description and specifications of a forged round plug: â?? Product description: A Round head plug is a mechanical fitting used to block the flow of fluid in a pipe. It is made of a solid piece of metal, typically Carbon steel, Alloy steel or Stainless steel, and has a threaded bore that allows it to be screwed into a pipe. The head of the plug is round and may be flat or domed. â?? Specifications: A. Material: Carbon steel, Alloy steel or Stainless steel, B. Size: 1/2 inch to 4 inches in diameter C. Class: 3000, 6000 Lbs. D. Pressure rating: 100 to 10,000 psi E. Thread: NPT, SAE, or BSPP F. Standard: ASME/ANSI B16.11 G. Finish: Black, galvanized, or other coating Forged Round head plugs are used in a variety of applications, including: â?? Plumbing â?? HVAC â?? Fire sprinkler systems â?? Oil and gas pipelines â?? Chemical processing â?? Water treatment They are a reliable and durable type of pipe fitting that can withstand high pressures and temperatures. Here are some additional information about forged round plugs: â?? They are typically made of carbon steel or stainless steel. â?? They are available in a variety of sizes and pressure ratings. â?? They can be threaded or socket welded. â?? They are often used in high-pressure applications, such as fire sprinkler systems and oil and gas pipelines. â?? They are also used in low-pressure applications, such as plumbing and HVAC systems. Round head plugs are a versatile and reliable type of pipe fitting that can be used in a variety of applications. They are a good choice for applications where strength, durability, and pressure resistance are important.
Product Description: A forged hex plug is a type of pipe fitting that is used to seal the end of a threaded pipe. It is made of a solid piece of metal that is forged into a hexagonal shape. The threaded end of the plug is compatible with a variety of pipe thread standards, such as NPT, BSP, and BSPT. Specifications: A. Material: Carbon steel, Alloy steel or Stainless steel, B. Size: 1/2 inch to 4 inches in diameter C. Class: 3000, 6000 Lbs. D. Pressure rating: 100 to 10,000 psi E. Thread: NPT, SAE, or BSPP F. Standard: ASME/ANSI B16.11 G. Finish: Black, galvanized, or other coating Applications: Forged hex plugs are used in a variety of applications, including: A. Oil and gas pipelines B. Chemical plants C. Power plants D. Water treatment plants E. HVAC systems F. Plumbing systems G. General purpose applications Benefits: Forged hex plugs offer a number of benefits, including: a) Strong and durable construction b) Long service life c) Threaded end for compatibility with a variety of pipe thread standards d) Available in a variety of materials and finishes to meet specific requirements
A forged square plug is a type of threaded fitting that is used to block the end of a pipe or tube It is made of a solid piece of metal that is forged into a square shape with a threaded bore The threaded bore allows the plug to be screwed into the end of the pipe or tube Technical Specifications The technical specifications of a forged square plug vary depending on the material used the size and the pressure rating However some common specifications include Specifications 1 Material Steel stainless steel or other metal 2 Standard ASMEANSI B1611 3 Size 12 inch to 4 inches in diameter 4 Pressure rating 100 to 10000 psi 5 Thread NPT SAE or BSPP 6 Finish Black galvanized or other coating Applications Forged square plugs are used in a variety of applications including Oil and gas pipelines Chemical processing plants Water treatment facilities Power plants HVAC systems Marine applications Advantages The advantages of using a forged square plug include Strong and durable construction Threaded bore for easy installation Wide range of materials and sizes available Can be used in highpressure applications Overall a forged square plug is a versatile and reliable type of threaded fitting that can be used in a variety of applications It is a good choice for applications where strength durability and a wide range of materials and sizes are required
A forged hex nipple full size is a type of threaded fastener that is made from a single piece of metal that has been forged into shape. The nipple has a hexagonal head on one end and a threaded shank on the other end. The nipple is used to connect two pipes or other components together. Technical specification: The following are the technical specifications of a forged hex nipple full size: 1. Size: 1/8 Inch to 2 Inch 2. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex 3. Finish: The nipple is available in a variety of finishes, including hot-dipped galvanized, black oxide, and electroplated nickel. 4. Strength: The nipple is strong and durable, and can withstand a variety of stresses. 5. Thread: NPT, BSP, BSPT Applications: Forged hex nipples full size are used in a variety of applications, including: 1. Plumbing 2. HVAC 3. Machinery 4. Construction 5. Oil and gas 6. Marine Advantages: The advantages of using forged hex nipples full size include: 1. Strength and durability 2. Wide range of sizes and materials available 3. Variety of finishes available 4. Easy to install 5. Long service life Overall, forged hex nipples full size are a versatile and reliable type of threaded fastener that is used in a variety of applications. They are strong, durable, and easy to install, making them a good choice for many projects.
A forged hex nipple reducing size is a type of threaded pipe fitting that is made by forging, a process that involves shaping metal by hammering or pressing it. It has a hexagonal head on one end and a threaded bore on the other end. The bore is smaller than the outside diameter of the nipple, which allows it to be used to reduce the size of a pipe. Technical Specifications: The following are the technical specifications of a forged hex nipple reducing size: 1. Size: 1/8 Inch to 2 Inch 2. Class: 3,000#, 6,000# Lbs. 3. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex 4. Finish: The nipple is available in a variety of finishes, including hot-dipped galvanized, black oxide, and electroplated nickel. 5. Strength: The nipple is strong and durable, and can withstand a variety of stresses. 6. Thread: NPT, BSP, BSPT Applications: Forged hex nipple reducing sizes are used in a variety of applications, including: 1. Plumbing 2. HVAC (heating, ventilation, and air conditioning) 3. Machinery 4. Automotive 5. Oil and gas Advantages: The following are some of the advantages of using forged hex nipple reducing sizes: 1. They are strong and durable. 2. They can withstand high pressure and temperatures. 3. They are corrosion resistant. 4. They are easy to install. Overall, forged hex nipple reducing sizes are a versatile and reliable type of pipe fitting that can be used in a variety of applications. They are strong, durable, and corrosion resistant, making them a good choice for demanding environments. However, they are also more expensive than other types of pipe fittings and may not be available in all sizes.
A forged union is a type of pipe fitting that is used to connect two pipes. It is made of a single piece of metal that is forged, or shaped, into a specific design. Forged unions are typically made of steel, stainless steel, or brass. Technical Specifications The technical specifications of a forged union vary depending on the material it is made of, the size of the pipe it is designed to connect, and the pressure rating it is designed to withstand. However, some common technical specifications for forged unions include: 1. Size: 1/8 Inch to 3 Inch 2. Class: 3,000#, 6,000# Lbs. 3. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex 4. Thread: NPT, BSP, BSPT Applications Forged unions are used in a variety of applications, including: 1. Plumbing 2. HVAC 3. Process piping 4. Oil and gas 5. Chemical processing 6. Marine Advantages of Forged Unions Forged unions offer a number of advantages over other types of pipe fittings, including: A. Strength: Forged unions are very strong and can withstand high pressures. B. Durability: Forged unions are very durable and can withstand a lot of wear and tear. C. Flexibility: Forged unions can be used in a variety of applications. D. Easy to install: Forged unions are easy to install and do not require any special tools. Overall, forged unions are a versatile and reliable type of pipe fitting that is well-suited for a variety of applications. They are strong, durable, and easy to install, making them a good choice for many projects.
A pipe closed nipple is a short, threaded pipe fitting that has closed ends. It is typically used to connect two pipes or to tee off a pipe. Pipe closed nipples are available in a variety of materials, including steel, stainless steel, brass, and plastic. They are also available in a variety of sizes, with the most common sizes being 1/4 inch, 3/8 inch, and 1/2 inch. Here is a technical specification of a pipe closed nipple: 1. Size: 1/8 Inch to 4 Inch Customized Up to 12â?? 2. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex 3. Thread: NPT, BSP, BSPT When choosing a pipe closed nipple, it is important to consider the material, size, thread type, and length. It is also important to make sure that the nipple is compatible with the other components in the system. Here are some additional things to keep in mind when using pipe closed nipples: A. Pipe closed nipples should be tightened to the correct torque specification to prevent leaks. B. Pipe closed nipples should not be used in applications where they will be exposed to high temperatures or corrosive chemicals. C. Pipe closed nipples should be inspected regularly for leaks and damage.
A pipe short nipple is a short length of pipe with threaded ends It is used to connect two pipes or to extend a pipe Description A pipe short nipple is a cylindrical tube with threaded ends The length of the nipple is typically less than 12 inches The diameter of the nipple is typically the same as the diameter of the pipes that it is connecting Technical Specifications The following are some of the technical specifications of a pipe short nipple 1 Size 18 Inch to 4 Inch Customized Up to 12 2 Material Carbon steel Alloy Steel Stainless steel Duplex 3 Thread NPT BSP BSPT Applications Pipe short nipples are used in a variety of applications including A Connecting two pipes B Extending a pipe C Tapping into a pipe D Mounting valves and fittings E Repairing leaks Safety Precautions When working with pipe short nipples it is important to take the following safety precautions a Use the correct size and type of nipple for the application b Do not overtighten the nipples c Use thread sealant to prevent leaks d Be aware of the pressure and temperature ratings of the nipples
A pipe long nipple is a short length of pipe with threaded ends that is used to connect two pipes or fittings. Pipe long nipples are available in a variety of sizes and thread types to fit different applications. Technical Specifications 1. Size: 1/8 Inch to 4 Inch Customized Up to 12â?? 2. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex 3. Thread: NPT, BSP, BSPT Applications Pipe long nipples are used in a variety of applications, including: a. Connecting two pipes b. Extending a pipe run c. Tapping into a pipe d. Repairing a leaking pipe e. Adding a fitting to a pipe Safety Precautions When working with pipe long nipples, it is important to take the following safety precautions: A. Use the correct size and type of nipple for the application. B. Make sure the nipple is properly threaded and tightened. C. Do not overtighten the nipple, as this could damage the threads. D. Use gloves and eye protection when working with pipe long nipples.
A bull plug is a solid plug used as an isolation device in piping systems, conduits or wellbore tubulars. It is a short part with one threaded end and one rounded closed end. The threaded end is used to connect the bull plug to the pipe or conduit, and the closed end provides a barrier to fluids or gases. The technical specifications of a bull plug will vary depending on the material, size, and thread type. However, some common specifications include: 1. Material: Carbon steel, Alloy steel, Stainless steel or Ductile 2. Size: 1/4 inch to 8 inches 3. Schedule: STD, XS, 160, XXS 4. Thread type: NPT, BSP, BSPT 5. Pressure rating: 100 psi to 20,000 psi Bull plugs are used in a variety of applications, including: A. Blocking off pipelines or conduits B. Isolating sections of piping for maintenance or repair C. Preventing the flow of fluids or gases D. Protecting equipment from contamination They are also used in oil and gas drilling operations to plug off the bottom end of down-hole logging instruments from borehole fluids. Here are some of the advantages of using bull plugs: a. They are simple and easy to install. b. They are available in a variety of sizes and materials to meet the needs of different applications. c. They are relatively inexpensive. d. They can be used to isolate a variety of fluids and gases. Overall, bull plugs are a versatile and effective way to isolate fluids and gases in piping systems, conduits, and wellbore tubulars. They are simple to install and available in a variety of sizes and materials to meet the needs of different applications.
A swage nipple concentric is a type of pipe fitting that is used to connect two pipes of the same diameter. It is made of a single piece of metal that is swaged, or expanded, to fit tightly around the pipes. The swage nipple is then inserted into the pipes and secured with a nut. The technical specifications of a swage nipple concentric vary depending on the size and material of the fitting. However, some common specifications include: 1. Material: Carbon steel, Alloy steel, Stainless steel or Ductile 2. Size: 1/4 inch to 8 inches 3. Schedule: STD, XS, 160, XXS 4. Thread type: NPT, BSP, BSPT 5. Pressure rating: 100 psi to 20,000 psi Swage nipples concentric are commonly used in a variety of applications, including: A. Plumbing B. HVAC C. Fire sprinkler systems D. Pressure vessels E. Industrial piping They are a versatile and reliable type of pipe fitting that can be used in a wide range of conditions. Here are some additional features and benefits of swage nipple concentrics: a. They are easy to install and remove. b. They provide a secure and leak-free connection. c. They are resistant to corrosion and rust. d. They are available in a variety of sizes and materials to meet the needs of different applications.
A swage nipple eccentric is a type of pipe fitting that is used to connect two pipes at an angle. The fitting has an eccentric bore, which means that the center of the bore is offset from the center of the fitting. This allows the fitting to be aligned with the two pipes at an angle. The technical specifications of a swage nipple eccentric vary depending on the size and material of the fitting. However, some common specifications include: 1. Material: Carbon steel, Alloy steel, Stainless steel or Ductile 2. Size: 1/4 inch to 8 inches 3. Schedule: STD, XS, 160, XXS 4. Thread type: NPT, BSP, BSPT 5. Pressure rating: 100 psi to 20,000 psi Swage nipples eccentric are commonly used in a variety of applications, including: A. Plumbing B. HVAC C. Fire sprinkler systems D. Pressure vessels E. Industrial piping They are a versatile and reliable type of pipe fitting that can be used in a wide range of conditions. Here are some additional features and benefits of swage nipple eccentric: a. They are easy to install and remove. b. They provide a secure and leak-free connection. c. They are resistant to corrosion and rust. d. They are available in a variety of sizes and materials to meet the needs of different applications.
A spectacle blind flange is a type of isolation device used in piping systems. It is a forged steel plate that consists of two interconnected discs: a ring with a hole of the same bore size as the pipeline, and a solid disc. In normal conditions, the spectacle blind is installed in the open position and does not interrupt the flow of the fluid conveyed by the pipeline. To stop the flow, the blind end is rotated into place between the flanges. Spectacle blinds are available in standard sizes up to 24 inches and in forged material grades like ASTM A105 (high-temperature carbon), A350 low-temperature carbon), and various ASTM A182 grades (alloy, stainless steel, duplex). They are typically used in conjunction with flanges, and are available with raised face (RF), flat face (FF), or RTJ faces. Technical Specifications of Spectacle Blind Flange Material: Carbon steel, low-temperature carbon steel, stainless steel Standard: ASME B16.48 Size: Up to 24 inches Face: RF, FF, RTJ Handle: Yes
Forged threaded fittings are one of the oldest types of pipe fittings that have been used for ages. They are made by forging solid blocks of steel into the desired shape, and then threading the ends to create a female or male thread. Forged threaded fittings are typically used for piping applications where pipes have a smaller bore and diameter, such as water distribution systems, cooling systems, and fire protection systems. Technical Specifications Materials: Carbon steel, stainless steel, alloy steel Sizes: 1/8" to 4" nominal pipe size (NPS) Pressure ratings: 2000, 3000, 6000, and 9000 psi Threads: Tapered Applications: Water distribution systems, cooling systems, fire protection systems, other low-pressure applications
Forged socket weld fittings are pipe fittings that are used to connect two pipes together. They are made from forged steel, which makes them strong, durable, and resistant to corrosion and high pressure. Forged socket weld fittings are available in a variety of shapes and sizes, including elbows, tees, reducers, unions, and couplings. They are typically used in piping systems that transport water, oil, gas, and other fluids. Pressure rating: Class 3000, Class 6000, and Class 9000 Material: Carbon steel, stainless steel, alloy steel Size: 1/8" to 4" Style: Elbows, tees, reducers, couplings
A forged street elbow threaded is a type of pipe fitting that is used to join two pieces of pipe or tubing at a 90-degree angle. It has a female fitting on one end and a male fitting on the other, which allows it to be connected to pipes with either male or female threads. Forged street elbows are typically made from carbon steel, stainless steel, or alloy steel, and are available in a variety of sizes and bend angles. Specifications: Material: Carbon steel, stainless steel, or alloy steel Size: 1/8" NB to 4" NB Bend angle: 90 degrees Thread type: NPT or BSP Pressure rating: 150 psi to 2500 psi Temperature rating: -65 F to 1200 F
Used for pneumatic applications for low pressure & also used for calibration of instruments. Available in Push-on and Push-in type. MOC : Anodised Aluminium, Brass, SS. Tubes also available in PU/NYLON/TEFLON
For high pressure applications on hydraulic and pneumatic lines, fittings are supplied upto rating of 9000 psi as per ANSI B 16.11. Also Butt Weld fittings are as per ANSI B 16.9 with various schedules MOC : SS 304, SS 316, CARBON STEEL, Alloy Steel (F-5,F-11,F-22,F-91)
For high pressure applications on instrumentation and process lines, fittings are supplied made from Barstock/Forgings with Hex Body for better grip. MOC : SS 304, SS 316, CARBON STEEL, Alloy Steel (F-5,F-11,F-22) For Piping, Flanges are available in various pressure ratings. Types : WNRF/SORF/SWRF/Lapjoint Rating : Class 150/300/600/900/1500/2500 MOC : A 182 F 304/316, A 105, Alloy Steel (F-5,F-11,F-22), A 350 LF2