Metal / Glass lantern with gold finish Size - 9-10 "
The socket complies a high-quality insulating thermoplastic coating that provides IP55 protection against dust and water ingress from all sides and has a water drainage hole. The socket is ready for 4-point fixing and the screw and 0.5 Meter cable at another end.JT Mobility Type 2 inlet socket (male), 32A, 250V, three phase is intended for installation in the vehicle side for a maximum of 32A.
The socket complies a high-quality insulating thermoplastic coating that provides IP65 protection against dust and water ingress from all sides and has a water drainage hole. The socket is ready for 4-point fixing and the screw.JT Mobility type 2 inlet socket (male), 32A, 480V, 3-phase. is intended for installation in the vehicle side for a maximum of 32A. Only to be used in combination with an EVSE (Electric Vehicle Supply Unit) controller
This product has a unique integrated design and strong structure which can be used outdoor and in rainy environment. It could also withstand the crushing of a vehicle. This Type 2 (Male) Type 2 (Female) Cable permits Single phase 32Amps of charge to flow into the electric vehicle. It used to connect vehicle with EVSE Socket (Female) to Electric Vehicle Inlet Socket (Male)JT Mobility mode 3 charging cable is a connector cable between the charging station and the electric car. To allow electric cars to be charged using type 2 plugs. This cable works on all charging stations mode 3 according to standards ISO 17409 and IEC 61851. It is compatible with all the charging stations and all EV rechargeable vehicle with type 2 standard. This cable will work safely on all charging stations, even the ones with inferior or superior charging power
Portable Mode 2 charging cable for connection EV to an ordinary domestic socket. Drivers can charge electric cars from a domestic socket in an emergency. Communication between vehicle and charging port is provided via a box connected between the vehicle plug and connector plug called ICCB (In-Cable Control Box).JT Mobility Type 1 SAE J1772 Smart portable chargers allow you to charge on the go from all types of sockets, from the usual socket to the industrial NEMA Plug-16A. It has the new generation practical display that shows the charging current, voltage at each phase, power, and temperature. All JT Mobility portable chargers allow you to set the charging current according to the circuit breaker and ensure that the circuit breaker will not trip during charging. All portable chargers are equipped with protective elements to ensure the complete safety of the car and the charger.
Key Features Processor : Intel Celeron Processor 1007U RAM : 4GB DDR3 HardDisk : 320GB HDD Operating System : Windows 7 Pro 64-bit Display : 11.6 Inch HD Graphics : Intel HD Graphics 4000 Webcam : Integrated 720p HD Camera Dimension: 293.4 x 216.0 x 32.3 mm Bluthooth/WIFI/Microphone/Speakers Ports: 2 x USB 3.0, 1 x USB 2.0, 1 x combo audio/microphone jack, 1 x Ethernet (RJ45), 1 x VGA, 1 x HDMI, 1 x security keyhole Weight: 1.78 kg approx Battery: Up to 2 Hours Laptop Charger
Voltage: 110-250 VAC, 50/60Hz Rated Load: Each switch Incandescent Lamp: 450W LED: 120W 1,00,000 Lakh touch cycle Feather Touch
THERMOCOUPLE TIPS TEMPERATURE TIPS
The Printers House is manufacturer and supplier of Thermal/ CTCP Plate
One of the biggest concerns for electric vehicle (EV) owners is knowing when and how to charge their vehicle. It makes sense: The average American has spent their life driving around in gas-powered cars, filling up at one of the hundreds of thousands of gas stations as the gauge creeps towards empty. Charging one s EV takes a little more planning, but with the growing demand and incentives for alternatives to gas-powered cars, public EV charging stations are becoming a more common sight.
CCTV Camera Wire 3+1 Coaxial in Full Copper All in One Wire Includes Power Supply Material: Plastic; Color: White Cable 3+1 gold-copper CCTV Size- 90 Meter
Color Black,Brwon & Green Packaging Type Roll I Deal In New Only You Supply In Metre Shape Round Material Viton
Continuous Emission Monitoring System BI7000 Sensor Technology Non Dispersive Infrared Absorption (NDIR), Zirconia (ZrO2), Paramagnetic, Ultraviolet Doppler Optical Absorption Spectroscopy (UV DOAS), Tuneable Diode Laser Spectroscopy (TDLS) Non Dispersive Ultravoilet Absorption (NDUV) Measurement Gas CO : 0-5000 ppm scalable NOx : 0-1000 ppm scalable SO2 : 0-1000 ppm scalable CO2 : 0-20% scalable O2 : 0-30% scalable Cl2 : 0-30 ppm scalable HCl : 0-200 ppm scalable HF : 0-30 ppm scalable H2S : 0-200 ppm scalable HC : 0-5% scalable NH3 : 0-500 ppm scalable Analog Output: 4-20mA analog output Digital Interface RS 485, MODBUS Protocol Relay Output 2 Nos. relay for alarms Power Supply 110/230 VAC, 50 Hz Dimension 19 Rack Heated Sampling Probe Operating temperature : Max. 400 C Mounting : Flange type. 2, 150 rating RF Max. working pressure : 6 bar Voltage : 110-230 V, 50 /60 Hz Heating : Self-regulating 180C For dust concentration : Upto 5 g/m MOC : SS 316 Heated Sample Gas Line Process Tube : PTFE / SS Process Tube Size : 1/4 inch OD Operating Voltage : 230 V AC Max. Operating Temperature : 200 C Sample Conditioning Unit with Industrial Cabinet Aspirator/Pump for sampling flue gas Pre and post cooler fine filters to remove drain, dust and mist in sample gas Auto drain and auto purging (blow back) facilities 2 way solenoid valves for switching, sampling, purging, draining and calibration Flowmeter to regulate and monitor the flow of sample gas Drain pump for continuous removal of condensate Sample Gas Cooler Industrial Cabinet Dimension: 1500 (H) x 600 (W) x 800 (D) mm
When the cable is connected, it is protected against the ingress of particles and water. The protective cover has a degree of protection IP55 and protects against ingress of dust. This open-end cable replacement is to be integrated to the charging station. You can charge your EV that has Type 2 port. The product has a nice appearance, a hand-held ergonomic design and is easy to plug.JT Mobility 7.3kW, Single Phase 32A Type 2 tethered charging cable is designed for charging in mode 3, it is suitable for connection and charging from all private and public AC stations. The connector has an ergonomic shape, which ensures easy and comfortable handling and connection
We have available following ships spares for Sale. PR Isolation amplifier electronics If required then please contact us on
12 Watt Luminare with One Watt Power LED, 18 AH Dry Okaya Battery, 40 Watt Solar Panel
8 universal analog inputs 8 thermocouples, Pt50, Pt100, Cu53, 0-100 mV, 0-5 V, 0-10 V, 1-5 V, 0/4-20 mA Isolated RS485/MODBUS RTU, Upto 57600 Baud or MODBUS/TCP & Telnet multidrop communication for PLC, SCADA, etc. 85~265 VAC or 18~35 V DC supply 4 key, 6 level programming Maximum 4 or 8 relay outputs Powerful, flexible SCADA software available
3 pin plug inserts
Transformer To IS: 2026-1977 RATED KVA -500 TYPE OF COOLING - ONAN RATED HV V-11000 OIL TEMP.RISE deg.c - 50 VOLTAGE LV V-433 Wdg.TEMP.RISE deg.c - 55 RATED HV A-26 IMPED.VOLT. % - 3.883 CURRENT LV A-667 VOLUME OF OIL 1. - 525 PHASES - 3 MASS OF OIL KG - 450 FREQUENCY HZ- 50 UNTANKING MASS KG - 1040 ONN.SYMBOL - Dyn11 TOTAL MASS KG - 2500 YEAR OF MFG. - 1999 MAKER'S SERIAL NO. - 905 CUSTOMER'S REF. - PO.NO.-PP-PVD/287 ORD-ASM Dt-02/02/99 INSULATION LEVEL - Li 75 AC 28
Very good Condition, CATERPILLAR 3512B GENERATOR SET YEAR-2012,KW-1424,RPM-1800,Running Hours-1354 hrs Only. #cat #caterpillar #marine #marineengine #generator #engine #generators #gensets Very Good condition Caterpillar Very low Running Hours 1354 , Year 2012 Radiator Cooled set is available for sale. Engine Make:Caterpillar Type:3512B KW:1424 KVA:1700 RPM:1800 Volt: 450 Hz: 60hz Year:2012 ECM SOFTWARE Above Good Running CAT Generator has been Removed from ship. Condition is Excellent... Engine with Alternator on Common base Frame. This is Exclusive in the Stock of Euro Marine. More Photos Available on Request.
