This device is used to test Covid-19. The Kit contains a buffer which is primary for the testing
PPE KIT CONTAINS 1.Protective suit type 3/4 en14126 . 2.shoe cover knee length. 3.safety googles, for Covid19 4.Gloves latex powdered 5.3 ply mask 6.Hospital waste bags
For use in arterial and venous procedures requiring percutaneous introduction of Intravascular devices. The Cordis AVANTI+ Introducer is the pioneer of catheter sheath introducer technology. Featuring a patented SLIX Valve, the AVANTI+ introducer provides smooth transitions, monitoring capabilities and exceptional performance for your procedural success, as well as A hexacuspid design that provides a balance between catheter maneuverability and hemostasis. A rotating suture collar that facilitates procedural flexibility. It stays in place and allows patient movement. A kink-resistant cannula design integrating a soft, flexible inner layer with a stiffer outer layer designed to increase bendability and support, and decrease kinking. Atraumatic tip transitions for both the sheath and the vessel dilator are uniquely tapered and manicured. This results in smooth insertions and helps to minimize damage upon entry.
The RPR test is a non-treponemal serological test used to detect antibodies produced in response to Treponema pallidum, the bacterium that causes syphilis. It's a qualitative test, meaning it gives a positive or negative result. The RPR test is typically performed on serum or plasma obtained from a blood sample. In the RPR test, the patient's serum or plasma is mixed with a solution containing cardiolipin, lecithin, and cholesterol particles. If the patient's serum contains antibodies against Treponema pallidum, these antibodies will react with the cardiolipin-lecithin-cholesterol particles, causing visible agglutination or clumping. The RPR card is a specialized card or slide designed to perform the RPR test. It typically contains multiple wells or spots where the serum/plasma sample and the reagent are mixed, allowing for easy observation of agglutination reactions. These cards are convenient for laboratory use, enabling multiple samples to be tested simultaneously and facilitating the interpretation of results.
The RPR test is a non-treponemal serological test used to detect antibodies produced in response to Treponema pallidum, the bacterium that causes syphilis. It's a qualitative test, meaning it gives a positive or negative result. The RPR test is typically performed on serum or plasma obtained from a blood sample. In the RPR test, the patient's serum or plasma is mixed with a solution containing cardiolipin, lecithin, and cholesterol particles. If the patient's serum contains antibodies against Treponema pallidum, these antibodies will react with the cardiolipin-lecithin-cholesterol particles, causing visible agglutination or clumping. A "RPR test slide" could refer to a specialized slide or card used to perform the RPR test. This slide likely contains wells or spots where the serum/plasma sample and the reagent are mixed, allowing for easy observation of agglutination reactions. These test slides are a convenient way to perform the RPR test in a laboratory setting, allowing for multiple samples to be tested simultaneously and facilitating the interpretation of results.
"Factview S. Typhus" may refer to a specific product or brand related to the diagnosis or management of typhus, but without more context, it's challenging to provide precise information. However, I can offer general information about typhus: Types of Typhus: Typhus is a group of infectious diseases caused by different species of bacteria from the genus Rickettsia. The two primary types of typhus that affect humans are epidemic typhus and endemic (murine) typhus. Epidemic Typhus: This type is caused by Rickettsia prowazekii and is transmitted to humans through the bites of infected body lice. Epidemic typhus occurs in outbreaks, often in overcrowded and unsanitary conditions. Endemic (Murine) Typhus: This type is caused by Rickettsia typhi and is transmitted to humans through the bites of infected fleas, typically from rats or other rodents. Endemic typhus is usually milder than epidemic typhus and occurs sporadically in various regions around the world. Symptoms: Symptoms of typhus can vary depending on the type and severity of the infection but often include high fever, headache, rash, muscle aches, and fatigue. Severe cases can lead to complications such as pneumonia, kidney failure, or even death if left untreated. Diagnosis: Diagnosis of typhus typically involves clinical evaluation, including symptoms and medical history, along with laboratory tests such as blood tests to detect antibodies against Rickettsia bacteria or molecular tests to detect the genetic material of the bacteria. Treatment: Typhus is treated with antibiotics, primarily tetracycline or doxycycline, which are effective against Rickettsia bacteria. Prompt treatment is essential to prevent complications and reduce the severity of the illness. Prevention: Preventive measures for typhus include avoiding contact with lice and fleas, practicing good personal hygiene, using insect repellent, and controlling rodent populations in areas where typhus is endemic.
"Factview H. pylori Ab" likely refers to a diagnostic test for detecting antibodies against Helicobacter pylori in biological samples. Helicobacter pylori is a bacterium that colonizes the stomach lining and is associated with various gastrointestinal conditions, including gastritis, peptic ulcers, and even stomach cancer. The "H. pylori Ab" test is designed to identify the presence of antibodies produced by the body in response to H. pylori infection. These antibodies can be detected in serum (blood) samples and serve as markers of past or present H. pylori infection. The test usually involves collecting a blood sample from the patient and then processing it to detect H. pylori antibodies using immunological methods such as enzyme-linked immunosorbent assay (ELISA) or chemiluminescent immunoassay (CLIA). These methods rely on the specific binding of antibodies to H. pylori antigens present in the test kit, leading to a visible or measurable signal indicating the presence of antibodies. Detection of H. pylori antibodies in clinical samples can help confirm H. pylori infection and guide appropriate treatment strategies. However, it's important to note that the presence of antibodies may indicate either current or past infection, as antibodies can persist in the bloodstream for some time after the infection has been cleared. Therefore, additional tests or clinical evaluation may be necessary to determine the timing and severity of the infection.
Factview H. pylori Ag" likely refers to a diagnostic test for detecting Helicobacter pylori antigens in biological samples. Helicobacter pylori is a bacterium that colonizes the stomach lining and is associated with various gastrointestinal conditions, including gastritis, peptic ulcers, and even stomach cancer. The "H. pylori Ag" test is designed to identify the presence of antigens produced by H. pylori in specimens such as stool, saliva, or gastric tissue. This test is valuable for diagnosing H. pylori infection, as it offers a non-invasive alternative to traditional methods such as endoscopy with biopsy. The test usually involves collecting a sample from the patient, typically stool, and then processing it to detect H. pylori antigens using immunological methods such as enzyme immunoassay (EIA) or lateral flow immunoassay. These methods rely on the specific binding of antibodies to H. pylori antigens present in the sample, leading to a visible or measurable signal indicating the presence of the bacterium. The detection of H. pylori antigens in clinical samples can aid in the diagnosis of H. pylori infection and help guide appropriate treatment strategies, such as antibiotic therapy and acid-suppressing medications. It is particularly useful for monitoring treatment effectiveness and detecting H. pylori recurrence after treatment completion.
"VTM" commonly stands for Viral Transport Medium. It's a solution used in the field of virology and microbiology to preserve and transport viral specimens collected from patients. VTM serves several crucial purposes: Preservation: VTM helps maintain the viability and integrity of viruses present in the specimen during transportation from the collection site to the laboratory. It prevents the degradation of viral particles, ensuring accurate testing and diagnosis. Inactivation: Some VTMs may contain agents that inactivate bacteria and fungi present in the specimen while preserving viruses. This prevents bacterial and fungal overgrowth, which could interfere with viral testing. Stabilization: VTM stabilizes the viral particles, preventing changes in their structure or characteristics that could occur during transportation or storage. This stability is essential for maintaining the accuracy of diagnostic tests. Facilitating Laboratory Processing: VTM is designed to be compatible with various laboratory testing methods, including viral culture, nucleic acid amplification (such as PCR), and antigen detection assays. It ensures that the specimen can be readily processed upon arrival at the laboratory. Safety: VTM may contain components that help reduce the risk of viral transmission during specimen handling and transportation, protecting laboratory personnel and others from potential exposure to infectious agents. VTM typically consists of a buffered saline solution supplemented with proteins, antibiotics, and antifungal agents to maintain the viability of viruses and prevent contamination. The composition may vary depending on the specific requirements of the viral specimens being transported and the testing methods used in the laboratory.
VDRL (Venereal Disease Research Laboratory) and RPR (Rapid Plasma Reagin) are both laboratory tests used for screening and diagnosing syphilis. VDRL (Venereal Disease Research Laboratory) Test: The VDRL test is a screening test for syphilis. It detects the presence of antibodies produced by the body in response to the bacterium Treponema pallidum, which causes syphilis. The test involves mixing the patient's blood serum with a substance that mimics syphilis antigens. If antibodies to syphilis are present, they will react with these antigens, causing visible clumping (agglutination) in the test tube. The VDRL test is often used as an initial screening test, but it may sometimes produce false-positive results or false-negative results, especially in early or late stages of syphilis. RPR (Rapid Plasma Reagin) Test: The RPR test is another screening test for syphilis that works on a similar principle to the VDRL test. It detects antibodies produced by the body in response to Treponema pallidum. Like the VDRL test, the RPR test involves mixing the patient's blood serum with a substance that contains antigens related to syphilis. If antibodies to syphilis are present, they will react with these antigens, causing visible clumping or agglutination. The RPR test is also used as an initial screening test, and it may produce false-positive or false-negative results in certain situations. Both the VDRL and RPR tests are commonly used for screening purposes, but they are usually followed up with more specific confirmatory tests, such as the Treponemal test (e.g., FTA-ABS or TP-PA), to confirm the diagnosis of syphilis. These confirmatory tests detect antibodies that specifically target Treponema pallidum, providing more accurate results.
VDRL (Venereal Disease Research Laboratory) is a test used to detect the presence of antibodies produced by the body in response to the bacterium Treponema pallidum, which causes syphilis. The VDRL test is a screening test for syphilis, and it's commonly performed on blood samples. The VDRL test typically involves mixing a patient's blood serum with a substance that mimics the antigens produced by the bacterium that causes syphilis. If antibodies to syphilis are present in the serum, they will react with these antigens, causing visible clumping (agglutination) in the test tube. The degree of clumping is then assessed visually or with the help of laboratory equipment. Strip tests for syphilis detection work on similar principles but are often designed for rapid and easy use. These strips contain specific antigens or antibodies that react with the patient's blood sample, producing a visible result that indicates the presence or absence of syphilis antibodies. The VDRL strip test, like other rapid diagnostic tests, offers quick results, making it valuable for screening purposes, especially in resource-limited settings or where timely diagnosis is critical. However, it's essential to confirm positive results with additional tests, as false positives can occur, especially in populations with low prevalence rates of syphilis.
The FactView HBsAg Strip is a diagnostic assay used for the qualitative detection of hepatitis B surface antigen (HBsAg) in human serum or plasma samples. Here's more information about this type of diagnostic test: Purpose: The test is used for the diagnosis of hepatitis B virus (HBV) infection. HBsAg is a protein present on the surface of HBV particles and is the earliest serological marker of acute HBV infection. Detection of HBsAg indicates active HBV infection. Principle: The FactView HBsAg Strip is typically an immunochromatographic assay that utilizes specific antibodies to capture HBsAg molecules in a patient's serum or plasma sample. The test is based on the principle of antigen-antibody binding, where HBsAg in the sample binds to specific antibodies immobilized on the test strip, resulting in the formation of visible test lines. Components: The test kit usually includes test strips, sample droppers, buffer solutions, and desiccants. The test strips contain specific reagents and antibodies for capturing HBsAg from the serum or plasma sample. Procedure: The test procedure involves collecting a small amount of serum or plasma from the patient and adding it to the sample well of the test strip. Buffer solution is then added, allowing the sample to migrate along the test strip. Results are typically visible within 15-20 minutes. Interpretation: The appearance of colored lines on the test strip indicates the presence or absence of HBsAg in the patient's serum or plasma sample. A visible line in the control region indicates that the test is valid. An additional line in the test region indicates a positive result for HBsAg. Sensitivity and Specificity: The FactView HBsAg Strip demonstrates high sensitivity and specificity for detecting HBsAg in serum or plasma samples. However, like all diagnostic tests, false-positive and false-negative results are possible and should be interpreted in conjunction with clinical findings. Utility: The qualitative detection of HBsAg provides valuable information for diagnosing HBV infection, assessing disease status, and guiding patient management decisions. HBsAg positivity indicates active viral replication and infectiousness. Limitations: While HBsAg testing is a valuable diagnostic tool, it has limitations, including the potential for false-positive results in low-prevalence populations and the inability to differentiate between acute and chronic HBV infection based solely on HBsAg positivity. Overall, the FactView HBsAg Strip is an important tool for diagnosing HBV infection, allowing for timely intervention and management of patients with HBV-related liver disease. It aids in the prevention of HBV transmission and the implementation of control measures to reduce the burden of hepatitis B worldwide.
The FactView Typhoid IgG/IgM Rapid Test Kit is a diagnostic assay used for the qualitative detection of IgG and IgM antibodies specific to Salmonella typhi, the bacterium that causes typhoid fever. Here's more information about this type of diagnostic test: Purpose: The test is used for the rapid diagnosis of typhoid fever, a bacterial infection caused by Salmonella typhi. Typhoid fever is characterized by fever, abdominal pain, headache, and other symptoms, and it can lead to serious complications if not treated promptly. Principle: The FactView Typhoid IgG/IgM Rapid Test Kit is an immunochromatographic assay that detects the presence of IgG and IgM antibodies in a patient's blood sample. IgM antibodies are typically produced during the acute phase of infection, while IgG antibodies are produced later during the convalescent phase. Components: The test kit usually includes test cassettes, sample droppers, buffer solutions, and desiccants. The test cassettes contain pre-coated membranes with specific antigens for capturing IgG and IgM antibodies against Salmonella typhi. Procedure: The test procedure involves collecting a small amount of blood from the patient (usually obtained via finger prick) and applying it to the sample well of the test cassette. Buffer solution is then added, allowing the blood sample to migrate along the test strip. Results are typically visible within 15-20 minutes. Interpretation: The appearance of colored lines on the test strip indicates the presence or absence of IgG and IgM antibodies against Salmonella typhi. A visible line in the control region indicates that the test is valid. Additional lines in the test region(s) indicate positive results for IgG and/or IgM antibodies. Sensitivity and Specificity: The FactView Typhoid IgG/IgM Rapid Test Kit demonstrates sensitivity and specificity for detecting typhoid fever. However, like all diagnostic tests, false-positive and false-negative results are possible and should be interpreted in conjunction with clinical findings. Utility: The rapid detection of IgG and IgM antibodies against Salmonella typhi provides valuable information for diagnosing acute or recent typhoid fever infections, determining immune status, and guiding patient management decisions. Limitations: While rapid diagnostic tests are useful for typhoid fever diagnosis, they have limitations compared to more sensitive methods such as blood culture or molecular testing. Factors such as test sensitivity, specificity, and the timing of specimen collection can influence test performance. Overall, the FactView Typhoid IgG/IgM Rapid Test Kit is an important tool for diagnosing typhoid fever, allowing for timely patient management and implementation of control measures. However, results should be interpreted carefully in conjunction with clinical evaluation and other laboratory tests.
The FactView Dengue IgG/IgM Antibody Combo test is a diagnostic assay used for the simultaneous detection of both IgG and IgM antibodies produced by the immune system in response to dengue virus infection. Here's more information about this type of diagnostic test: Purpose: The test is used for the diagnosis of dengue virus infection in patients presenting with symptoms consistent with dengue fever or other dengue-related illnesses. Dengue is a mosquito-borne viral infection caused by four closely related viruses (DENV-1, DENV-2, DENV-3, and DENV-4) transmitted by Aedes mosquitoes. Principle: The FactView Dengue IgG/IgM Antibody Combo test is an immunochromatographic assay that detects the presence of both IgG and IgM antibodies in a patient's blood sample. IgM antibodies are typically produced during the acute phase of infection, while IgG antibodies are produced later during the convalescent phase and provide long-term immunity. Components: The test typically includes test cassettes, sample droppers, buffer solutions, and desiccants. The test cassettes contain pre-coated membranes with specific antigens for capturing IgG and IgM antibodies. Procedure: The test procedure involves collecting a small amount of blood from the patient (usually obtained via finger prick) and applying it to the sample well of the test cassette. Buffer solution is then added, allowing the blood sample to migrate along the test strip. Results are typically visible within 15-20 minutes. Interpretation: The appearance of colored lines on the test strip indicates the presence or absence of IgG and IgM antibodies. A visible line in the control region indicates that the test is valid. Additional lines in the test region(s) indicate positive results for IgG and/or IgM antibodies. Sensitivity and Specificity: The FactView Dengue IgG/IgM Antibody Combo test demonstrates high sensitivity and specificity for detecting dengue virus infection. However, like all diagnostic tests, false-positive and false-negative results are possible and should be interpreted in conjunction with clinical findings. Utility: The rapid detection of IgG and IgM antibodies against dengue virus provides valuable information for diagnosing acute or recent dengue virus infection, determining immune status, and guiding patient management decisions.
The FactView Dengue NS1 Antigen test is a diagnostic assay used for the rapid detection of the non-structural protein 1 (NS1) antigen produced by the dengue virus. Here's more information about this type of diagnostic test: Purpose: The test is used for the early detection of dengue virus infection. Dengue is a mosquito-borne viral infection caused by four closely related viruses (DENV-1, DENV-2, DENV-3, and DENV-4) transmitted by Aedes mosquitoes. Principle: The FactView Dengue NS1 Antigen test is an immunochromatographic assay that detects the presence of the NS1 protein in a patient's blood sample. NS1 is a viral protein produced during acute dengue infection and can be detected in the bloodstream during the early stages of the disease. Components: The test typically includes test cassettes, sample droppers, buffer solutions, and desiccants. The test cassettes contain pre-coated membranes with specific antibodies for capturing the NS1 antigen. Procedure: The test procedure involves collecting a small amount of blood from the patient (usually obtained via finger prick) and applying it to the sample well of the test cassette. Buffer solution is then added, allowing the blood sample to migrate along the test strip. Results are typically visible within 15-20 minutes. Interpretation: The appearance of colored lines on the test strip indicates the presence or absence of the NS1 antigen. A visible line in the control region indicates that the test is valid. Additional lines in the test region(s) indicate positive results for NS1 antigen. Sensitivity and Specificity: The FactView Dengue NS1 Antigen test demonstrates high sensitivity and specificity for detecting dengue virus infection during the early stages of illness. However, like all diagnostic tests, false-positive and false-negative results are possible and should be interpreted in conjunction with clinical findings. Utility: Rapid diagnostic tests like the FactView Dengue NS1 Antigen test provide a quick and convenient method for diagnosing dengue virus infection in resource-limited settings, where access to laboratory facilities and molecular testing may be limited. Limitations: While rapid diagnostic tests are valuable tools for dengue diagnosis, they have limitations compared to more sensitive methods such as nucleic acid amplification tests (NAATs) or virus isolation. Factors such as test storage conditions, operator technique, and the stage of infection can influence test performance.
A "premium tonometer" typically refers to a high-quality, advanced device used to measure intraocular pressure (IOP) in the eye. Intraocular pressure is the fluid pressure inside the eye, which is an important indicator of eye health and is particularly crucial in conditions such as glaucoma. Premium tonometers often incorporate advanced technology and features to provide accurate and reliable measurements of intraocular pressure. Here are some characteristics commonly associated with premium tonometers: Accuracy: Premium tonometers are designed to provide highly accurate measurements of intraocular pressure. They often use sophisticated sensors and calibration methods to ensure precision. Ease of Use: These tonometers are usually user-friendly, with intuitive interfaces and ergonomic designs. They may feature automated measurement functions to streamline the testing process. Versatility: Premium tonometers may offer versatility in terms of measurement methods. For example, some tonometers use applanation tonometry, where a small probe gently flattens a portion of the cornea to measure pressure, while others may use techniques such as air puff tonometry or rebound tonometry. Data Management: Many premium tonometers include features for storing and managing measurement data. This may include digital storage capabilities, connectivity options for transferring data to electronic medical records systems, or integration with software for analysis and reporting. Quality Construction: Premium tonometers are typically constructed with durable materials and undergo rigorous quality control to ensure reliability and longevity. Calibration: These devices often have built-in calibration systems or mechanisms to maintain accuracy over time. Regular calibration ensures that the measurements remain consistent and reliable. Professional Use: Premium tonometers are commonly used in clinical settings by ophthalmologists, optometrists, and other eye care professionals who require precise intraocular pressure measurements for diagnostic and monitoring purposes.
A "premium tonometer" typically refers to a high-quality, advanced device used to measure intraocular pressure (IOP) in the eye. Intraocular pressure is the fluid pressure inside the eye, which is an important indicator of eye health and is particularly crucial in conditions such as glaucoma. Premium tonometers often incorporate advanced technology and features to provide accurate and reliable measurements of intraocular pressure. Here are some characteristics commonly associated with premium tonometers: Accuracy: Premium tonometers are designed to provide highly accurate measurements of intraocular pressure. They often use sophisticated sensors and calibration methods to ensure precision. Ease of Use: These tonometers are usually user-friendly, with intuitive interfaces and ergonomic designs. They may feature automated measurement functions to streamline the testing process. Versatility: Premium tonometers may offer versatility in terms of measurement methods. For example, some tonometers use applanation tonometry, where a small probe gently flattens a portion of the cornea to measure pressure, while others may use techniques such as air puff tonometry or rebound tonometry. Data Management: Many premium tonometers include features for storing and managing measurement data. This may include digital storage capabilities, connectivity options for transferring data to electronic medical records systems, or integration with software for analysis and reporting. Quality Construction: Premium tonometers are typically constructed with durable materials and undergo rigorous quality control to ensure reliability and longevity. Calibration: These devices often have built-in calibration systems or mechanisms to maintain accuracy over time. Regular calibration ensures that the measurements remain consistent and reliable. Professional Use: Premium tonometers are commonly used in clinical settings by ophthalmologists, optometrists, and other eye care professionals who require precise intraocular pressure measurements for diagnostic and monitoring purposes.
An "ECO tonometer" is a type of tonometer used to measure intraocular pressure (IOP) in the eye. Intraocular pressure is the fluid pressure inside the eye, and it's an important aspect of eye health to monitor, especially in conditions like glaucoma, where elevated intraocular pressure can lead to optic nerve damage and vision loss. The "ECO" in ECO tonometer might stand for "Electronic Contact Ophthalmodynamometer." This type of tonometer typically uses electronic sensors and probes to measure intraocular pressure. Contact Method: ECO tonometers usually involve direct contact with the surface of the eye. The device gently touches the cornea to measure the pressure within the eye. Electronic Sensors: These tonometers utilize electronic sensors to detect changes in pressure. When the probe makes contact with the cornea, it measures the force required to slightly flatten the cornea, providing a measurement of intraocular pressure. Digital Display: ECO tonometers often have a digital display that shows the measured intraocular pressure in millimeters of mercury (mmHg) or another applicable unit. Accuracy and Precision: These tonometers are designed to provide accurate and precise measurements of intraocular pressure, which is essential for monitoring eye health and diagnosing conditions like glaucoma.
Accu Chek Active 50 Test Strips
We are pleased to offer you One Touch Ultra 100 Test Strips as follows; Product Name: One Touch Ultra 100 Test Strips
