The process of activation is carried out in two stages. Firstly the coconut shell is converted into shell charcoal by carbonization process which is usually carried out in mud-pits, brick kilns and metallic portable kilns. The coconut shell charcoal is activated by reaction with steam at a temperature of 900oC -1100oC under controlled atmosphere in a rotary kiln. The reaction between steam and charcoal takes place at the internal surface area, creating more sites for adsorption. The temperature factor, in the process of activation is very important. Below 900oC the reaction becomes too slow and is very uneconomical. Above 1100C the reaction becomes diffusion controlled and therefore takes place on the outer surface of the charcoal resulting in loss of charcoal. Products Specifications PH Value : 6.5 - 7.5 Methylene Value adsorption mgm/gm : 190 - 350 Adsorption capacity at % by mass (min) : 45 Moisture (max.) : 5% Ash (max) : 5% Hardness : 90
Carbon Pads
It is dust collector carbon packed in Jumbo bags. It is all of tyre plant. Weight around- 19 MTs. Inspection possible and pickup as and where basis. Please request for photos if needed or call or email me if interested. Price- Exworks- Rs 32/- per Kg. Only serious buyer contact me. Material is ready to load.
Carbon Black Powder is mainly used as reinforcing agent in tyres and rubber products and aslo colorant additives and filler in plastics, Inks, Coating, and other industrial applications. We deal in all Imported and Domestic material grades ranging from N220 N330 N550 N660
a. Name of product-Coconut shell Activated carbon/ Activated carbon/Activated carbon for Gold recovery/Activated carbon for water treatment/Activated carbon for Gas treatment b. Key Specifications/Special Features: Iodine- 900 to 1100 , Mesh Size: 4x8,6x12,8x16,8x30,12x40,12x30,20x50,30x60,50x100,50x200,minus 100,minus 200,minus 325,40x140, 40x80,minus 140,minus 50,minus 40
High Quality gold recovery Steam Activated carbon from coconut shell with low platelets and high hardness
made by high quality Anthracite coal, through the selection, powder and screen process, it has good shape, high hardness, anti-pressing and wearing, does not dissolve in acidic, alkaline, neutral water and it is popularly used in various water. The main usage is as water media during water treatments, which can soften the water and improve the taste.
Granular Activated Carbon Products range from the size 0.2mm to 3.75mm. Granular Activated Carbon has relatively larger particles size compared to powdered activated carbon and consequently, presents a smaller external surface. Powdered Activated Carbon Powdered Activated Carbons are small activated carbon particles, with a size that is predominantly less than 0.075 mm. Pelletized Activated Carbon Pelletized form are activated carbon compressed into formed cylinders, and have wide variety of uses removing contaminants such a volatile organic compounds (VOC's) and mercury from natural gas as well as controlling odor.
Activated Carbon
We are supplier and exporter of Activated Carbon. Granular Activated Carbon Products range from the size 0.2mm to 3.75mm. Granular Activated Carbon has relatively larger particles size compared to powdered activated carbon and consequently, presents a smaller external surface. Powdered Activated Carbon Powdered Activated Carbons are small activated carbon particles, with a size that is predominantly less than 0.075 mm. Activated Carbon is used worldwide in purification of Water, Air, etc
Activated Carbon Powder and Granules
he Brand Experience "Lustron" is a range of tailor made Lustrous Carbon Additive for use in green sand molding in ferrous foundries, for imparting better surface finish on castings. Lustron is a proprietary blend of carefully selected and scientifically evaluated lustrous carbon carrying carbonaceous additives and anti-scabbing agents. Today "Lustron" is no longer just a product. It is the experience of using a brand which when delivered to the customer, is backed by: Research of the requirement the customer's sand system Knowledge of its introduction & application in the sand preparation & molding process Experience of the green sand system & the forces acting in, on & around it, that makes for good casting finish Proven Track Record of 20 years of 'on-site', 'on-line' application in virtually all types, dimension & configuration of engineering & automotive castings in SG iron & gray iron Specification Lustron-F Lustron-Premium Lustron-HPL Volatile Matter 55-60% 50-55% 42-48% Ash Content 4.5% 3.5% 5% Fixed Carbon By Difference By Difference By Difference Advantages Improved sand peel off from the casting Improved surface finish Reduced consumption of shots Reduced fettling Reduced sand related casting defects Reduced man-hours on pre-dispatch casting preparation faster turn-around Reduced variables in sand control = standardization of the sand molding process = (consistent reproducible results) For further details on general guidelines on the use & application of Lustron as well as health & safety data sheets, please contact us for prompt attention to your requirements.
Product Description : 1. Gas phase absorption.Tail liquid recycle and solvent recovery such as the recovery of benzene gas, gas recovery from gasoline, butane. Tropsch Synthesis of emissions to recover the hydrocarbon. 2. Water further treatment and purification. Deodorant and decolor of waters in areas like electric power plant, pharmaceutical industry and other industrial waste waters 3.Work as catalysis carrier in synthesizing of mercury bichloride and Vinyl Acetate,or used for industrial gas desulphurization and phosgene production of the catalyst. 4. In the gold mining industry, gold recovery,extraction and refining.. Product origin : INDIA Minimum Order Size and Packgaing details : MOQ- 5 TON PACKING : 5 Kg, 40/50 Kg Bags, As per client requirment
Our product is mainly used in different industries for ETP, STP, WTP, Etc
Activated Carbon Charcoal
Coconut Shell based Activated Carbon is widely used in various Filtration and purification processes like Air Purification, Water Purification, Gold Purification, Cigarette Filter etc. We are Exporters of high quality Activated Carbon and is available in all grades and particle Sizes and Iodine Value (IV) ranging from 900 to 1300
Coconut shell activated carbon offers high surface area, extensive micro-porous structure which makes it an exceptional absorbent of molecules that are more difficult to remove. Ash: 4% Max - Moisture Content: 5% Max - Density: 0.5 Gm/cc Max - Min - Mesh Size: 8x16 Packaging Terms : 25 Kgs Bags Quantity Payment Terms : To be discussed with Buyers Looking for buyers from : Worldwide Contact : Sujan Roy
Range :15 NB UP TO 1200 NB IN SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS Form :Seamless / Erw / Welded in Round & Square . Carbon Steel : ASTM / ASME A 53 GR. A , B ASTM / ASME 106 GR. A , B ,C . API 5L GR. B , API 5L X 42 , X 46 , X 52 , X 60 , X 70. ASTM / ASME A 691 GRA , B ,C Alloy Steel: ASTM / ASME A 335 GRP 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91 ASTM / ASME A 691 GRP1 CR , 1 1/4 CR , 2 1/4 CR , 5 CR , 9CR , 91.
A Grade, High Quality, As most of its pore structure consists of micropores (more than 80%), coconut shell carbon can efficiently absorb impurities with micropore molecular structure, such as those present in drinking water.
We manufacture a wide variety of activated carbon products that suit different industries depending on their industrial purposes. We have the ability and technically advanced machinery capacity to produce a wide range of activated carbon products varying from millimeters to micron range.
