Mercury and its compounds are cumulative toxins that are harmful even when taken in very small amounts. Itâ??s unique properties allow widespread applications across the paper and pulp industry, chemical processors, & other various manufacturers. Activated carbons are an excellent solution to control the widespread discharge of elemental mercury and its salts. Flexus Global provides Specially designed Carbon to treat a variety of flue gas compositions, high adsorption capacity for many pollutants with exceptional mercury removal rates and low carbon usage. Most commonly used adsorbents for removal of pollutants and treatment of wastewater. Available in Different Mesh Sizes.
Exhaust gases from several industrial and production units where coal or sulfide ores are used, contain sulfur-containing toxic gases and vapors such as sulfur dioxide, hydrogen sulfide, carbon disulfide, and several organosulfur compounds. These industrial gases need to be desulfurized effectively before mixing with the environment. Sulfur can also be removed with the use of activated carbons. Flexus Global speciality activated carbons are promising adsorbents for SO2 and sulfur-containing toxic gas removal due to their high efficiency and regenerative capacity.
Formaldehyde and other aldehydes are the main pollutants in indoor air. Formaldehydes are mainly obtained from paint, polymerizing plates, bindings, chemical fibers and even cigarette smoke Activated carbon adsorbents are the most promising adsorbents when adsorption of traces of gases and vapors is concerned. Our impregnated activated carbons offer effective chemisorption of formaldehyde from air.
Carbon monoxide (CO) is a very toxic gas with TLV of 35 ppm and it is to be removed from the air in mines, enclosed spaces, fire breaking places. Active carbon can not hold the CO due to physisorption and therefore palladium impregnated carbon was developed which became even more active due to high RH. This again one of the very specialized carbon exported by us for air purification and CO removal. It almost works like the turn over catalyst and offers very high protection against CO. This carbon has High Surface area providing almost offers endless protection against CO, Works in any RH but becomes more active at high RH.
Whetlerite carbons are Cu, Cr and Ag impregnated activated carbons used for respiratory protection against super toxic nerve, blister, blood and choking agents in the military. Whetlerite carbons are used in nuclear, biological and chemical (NBC) filters for collective protection, and in NBC canisters, as part of individual gas masks, for personal protection. Flexus Global exports impregnation of active carbon and whetlerite carbon to various countries.
Activated carbon, also known as activated charcoal, is a highly porous form of carbon with a large surface area. It is created by processing carbon-rich materials, such as coconut shells, wood, or coal, at high temperatures to activate their adsorption properties. Activated carbon is widely used for adsorption and purification processes, including water treatment, air purification, and removal of contaminants from gases and liquids. It is known for its ability to adsorb a wide range of impurities, including toxins, pollutants, and odors.
Product Material - Coal Base Iodine Value mg/gm - 600 | CTC % - 55.0 to 70.0 | Moisture % - 5.0 max | Ash Content % - 10.0 max | Hardness - 95.0 min | Particle diameter MM - 3.0,4.0,5.0 | Packing 25 KG HDPE Bag | Versatile Applications: Water Purification | Air Purification | Medical and Pharmaceutical..... Choose our Activated Coconut Carbon for unparalleled purity and performance.
Carbon Disulfide
Carbon Black
Carbon Disulfide
Carbon Black
Carbon Black
Our Powder activated carbon is manufactured using pure pine wood which is an excellent base for manufacturing activated carbons with good adsorption power. The steam activated process is done by activating the charcoal in a rotary kiln by heating at high temperatures by steam. The activated carbon that comes out from the kiln is called unwashed activated carbon. These unwashed activated carbon has higher ash and iron content. This is reduced by washing the unwashed activated carbon with acid (HCl / H2SO4) and purified water. This results in reduction of ash content to as low as 1% and iron as low as 50 ppm. The gradation of different qualities of activated carbon is done on the basis of Methylene blue value and iodine value. The iodine value is a better test as the particle size of iodine molecule is small enough to penetrate the smallest of pores. We can relate the iodine value of activated carbon directly to its surface area because of the above fact. MB VALUE : 100 TO 150
We deals in the following Chemicals :- Calcium Carbonate Bentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite Clay Quartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica Grits Mica Powder, Mica Flakes, Mica Blocks, Mica Sheets Dolomite Powder Barite Powder, Barite Ore Hematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide ) Ilmenite (Synthetic Rutile) Fly Ash Powder Alumina Silica ( Cenosphere ) Powder Calcium Carbonate Powder Magnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells
Specifications Products : Ground Calcium Carbonate Use ; Industrial Use Color : White Form : Powder Packing Type : Plastic Bags Packing Size : 50kgs Purity : 90-99% Whiteness : 88 - 96% Ground Calcium Carbonate Calcium Carbonate is composed of the crystalline mineral, calcite, which occurs naturally in the form of chalk, marble, dolomite or lime stone. Chalk is formed by shells of Nanofossils that is a fine micro crystalline material. Other forms of calcite are also of biogenic origin but more compacted than chalk. Marble deposits are limestone changed by crystallization under conditions of extreme heat and pressure. In some cases, is process yields pure marble of exceptional whiteness. Good quality marble and dolomite deposits are available in the state of Rajasthan (India). High quality stones are manually selected at the mines and after its purity tests, these are sent to the processing centre. During the process the stones are washed to remove impurities. These stones are crushed and grinded as per the customers' requirement. The powder is further processed to micronize varying micron size up to 5 microns top cut. After micronizing it is subject to a process of unique surface coating with fatty acids or suitable coupling agents. The coated products become hydrophobic which increase the compatibility with polymers and other organic based Additives. The processing techniques at PEEKAY MINERALS ensures consistent quality, control of top-cut and average particle size and freedom from impurities at pocket friendly costs. On demand at PKM coated Ground Calcium Carbonate is made available. Coating with Stearic acid or Titanates coupling agent is being carried as per choice of end users. Application: Paints & Powder coatings Paper & Boards Printing Inks PP, LLDPE and LDP compounds PVC master batches and compound Features: Free from impurities Less Reactive Good dispersion Unique particle size Improved brightness and opacity Good Mechanical and flow properties