our group :SEWARAM KANSARA GROUP:,IS about 60 years old in the world bearing market, and manufacture of Bearing Rollers and international level bearing too. we make bearing and rollers according to customers specification and drawing. the major company in the world mainly SKF,FAG,NRB,TIMKAN, and many more are involved, you come to India and check our world level accuracy by visiting our plant ,we will be very happy to receive you,
We are a manufacturer and exporter of all mechanical parts like bearings, gears, tractor parts, auto parts, bicycles, valve tappets, fasteners, connecting rod, crank shaft, engine parts, two wheeler spare parts, bellows, o ring, hydraulic seal, washer, banjo bolt, cam shaft, piston etc. we are making and we can make any damn parts from drawing or sample.
We are manufacturer of all types of ball bearing. The given below part numbers ball bearing are suitable for BAJAJ - RE, TVS - KING, piaggio APE, mahindra ALFA, atul GEM. We also accept the drawing of the customer and according to that drawing, we developed their product. OE Number Is 6201-2RS / 6202-2RS / 6203-2RS / 6204-2RS / 6301-2RS / 6002-2RS / 6004-2RS / 6005-2RS / FWBK20 / FWBK25 / 6205-2RS / 6206-2RS / 6207-2RS / 6302-2RS / 6303-2RS / 6304-2RS / 6305-2RS / 62/22-2RS / 562398 / 805345 / 801136 / 805697 / 805921 / 803374 / Etc.
This steering column bearing (upper cone set) is suitable for piaggio APE, mahindra ALFA, atul GEM. It is fitted in the upper steering column. OE Number Is ST-003.
This Crank Shaft Assembly Is For Four Stroke Engine. It Is Included With 6305 Bearing. It Is Suitable For BAJAJ - RE. We Manufacture Crank Shaft Assembly For All Types Of Vehicle. We Also Accept The Drawing Of The Customer And According To That Drawing We Developed Their Product.
The entire basic steering assembly is called a Triple Tree, Triple Clamp, Steering Head, Steering Head Yoke, or Steering Stem. Up until around 1985 most, but not all, bikes used loose ball bearings for their steering races. These bearings have upper and lower outer races that are a tight press fit in the frame and a lower inner race that is press fitted to the steering stem. The upper inner race is a loose fit.
We deals in original bearings of SKF/FAG/URB/NTN (INDIAN/IMPORTED) Indian Brands NBC. A.Nairsons Industries (India) KT brand manufacture Adapter Sleeves, Withdrawal Sleeves, Lock Nuts, Lock Washers, Hydraulic Sleeves Hydraulic Sleeves, Hydraulic Nuts HMV Series, Precision Lock Nuts KAN, KZM, KMT Series and in Lock Nuts KM, KML Series
A.Nairsons Industries (India) KT brand manufacture Adapter Sleeves, Withdrawal Sleeves, Lock Nuts, Lock Washers, Hydraulic Sleeves Hydraulic Sleeves, Hydraulic Nuts HMV Series, Precision Lock Nuts KAN, KZM, KMT Series and in Lock Nuts KM, KML Series.
We offer Bearing Steel that has right amount of carbon (0.55 to 1.10 percent), manganese (0.10 to 1.15 percent), silicon (0.15 to 2.0 percent), phosphorus and sulfur up to a maximum of 0.03 percent and chromium (0.5 to 2.0 percent). The remaining percent is that of iron. Chemical properties determine the anti-corrosive properties of the Bearing Steel. The chemical composition of the steel also dictates the mechanical and physical properties of strength and hardness, toughness and brittleness and ductility and malleability that can be found in our Bearing Steel. Details Bearing steel has enormous hardness because the manufacturing process of Bearing Steel requires melting and degassing of the metal followed by certain metallurgical processes. It is then tempered and quenched. Bearing steel has a bending strength of 2400 MPa (Pascal Unit) and can withstand high stress and centrifugal forces. But it has a low corrosion resistance. Bearings materials can either be through-hardened or case-hardened and may also require vacuum-processing to ensure purity. A minimum expected hardness for bearing components is 58 Rc (measurement of hardness) but it has generally higher hardness levels. Technical Specifications Grade % C Mn Si Ni Cr Mo S P SAE 52100 Min 0.98 0.25 0.15 - 1.30 - Max Max EN31 Max 1.10 0.45 1.60 - 1.60 - 0.015 0.02
Bush 00296670
Center Joint Bearings serves as a junction on the drive shaft between the transmission and the differential Center support bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components
Used in All automobile Clutch Assemblies The clutch bearing is similar to a roller bearing, but instead of allowing the elements to roll freely in both directions the rolling elements lock when rolled the opposite direction. Clutches have three main tasks to perform overrunning, indexing and backstopping. The clutch consists of a series of cam shaped steel wedges.
Heavy Vehicles & other automobiles, Fork lifts, Marine Engines and other Heavy duty engines and Mechanism The Kingpin Bearing is capable of bearing thrust pressure in various industrial pump applications and possesses high resistivity and durability. These are constructed using high grade raw materials, which are tested under the supervision of experienced professionals. Kingpin bearing is the main pivot in the steering mechanism of a car or other vehicles
We are manufacturing Ball bearings,tapper bearings,spherical bearings,pillow block available, Linier bearing.. From india
Rubber bushes are a type of anti vibration bush that generally consist of cylindrical inner and outer metals, fully bonded with rubber in between. The rubber bush for the suspension can be pressed into a housing, which will provide compliance between the inner and outer metals in the radial, axial , torsional and conical directions. A wide range of rubber bush designs can be offered; with hollow inner metals, solid inner metals (with lugs), segmented outer metals, and profiled inner/outer metals. If you require rubber bushes for a specific application, our experienced engineers can offer a custom anti vibration service using our advanced Finite Element Analysis software and calculations. We are the countries leading expert at creating bespoke anti-vibration fittings for a wide range of different industries. So if you have any queries regarding shock, vibration and noise reduction please contact us and we will find a solution for you.
Corrosion resistance alloy having superior strength & is generally used for impeller / Bushes OR As per specification provided by customer CE Stands guarantee for MATERIAL SPECIFICATION & Products will be Completely free from any types of POROSITY/BLOW HOLES. Please Furnish Following Details to Submit Our Lowest Offer : a) Technical Drawing OR Sample b) Material Specifications, If any c) Quantity required per Consignment.
BM bi-metal bushes are composed of two metal strips, in two different materials; the first is normally in steel, the second is normally constituted by an alloy containing copper, which when coupled with the steel strip acts as an internal covering. Furthermore, some sizes also have an external relubrication hole. ADVANTAGES The special construction of these bushes means they have good resistance against wear, in particular at medium speed with a medium load, or at low speed with a high load. SPECIAL TECHNICAL FEATURES The internal surface of the BM bimetal bushes can include different types of channels, so as to satisfy the various types of applications and lubrication conditions in which the bushes may be used.
Bimetal Bearings & Bushes for Automoblie / Marine / Railway / Turbine / Industrial / Comprosser etc.
24038 CCK30C3W-33 bearing, steel cage, 1:30 tapered bore, C3 clearance, with oil groove and holes
We are manufacturer of all types of tapered roller bearing. The given part numbers 30204 (br-30204) / 320/32x (br-320/32) / 30205 / u399-u360l / etc of the tapered roller bearing are suitable for tata ace. We also accept the drawing of the customer and according to that drawing, we developed their product.
