Self Locking Hooks S-316N S-316A SHUR-LOC - Eye Hook Chain Size,S-316A Stock No.,Grade & Alloy chain working load limit(tons) 4:1,Wire Rope XIP IWRC Mechanical Splice,Weight each kg in,mm,size (mm),Working load limit (tons) 5:1 -,6,1097918,1.12,8,0.9,0.39 1/4-5/16,7-8,1097920,2.0,11,1.7,0.82 3/8,10,1097921,3.15,13,2.3,1.47 1/2,13,1097922,5.3,16,3.5,2.70 5/8,16,1097926,8.0,22,6.9,5.78 * Ultimate Load is 4 times the Working Load Limit based on Grade 8 Chain. Positive Lock Latch is Self-Locking when hook is loaded Forged Alloy Steel- Quenched and Tempered Rated for both Wire Rope and Grade 8 Chain Meets ASTM A-952-96 and proposed Euronorm standards for Grade 8 chain fitting Fatigue rated. The SHUR-LOC-hook, if properly installed and locked, can be used for personnel applications and meets the intent of OSHA Rule 1926.550 (g) (4) (iv) (B) G-414 Heavy Thimble should be used with wire rope slings Individually Proof Tested at 2-1/2 times the Working Load Limit with certification Trigger repair Kit available (5-4316). Consist of spring, roll pin and trigger Designed with Engineered Flat to connect to Grade . 8 chain fittings.
Eye Hooks For Wire Rope The most complete line of Eye hooks. Available 1/2 ton to 60 tons. Proper design, careful forging and precision controlled quench and tempering give maximum strength. Every Eye Hook has a pre-drilled cam which can be equipped with a latch. Eye hooks are load rated. Available in mild steel and alloy steel.
Single sheave with hook Sheave Size (in) Wire Rope Size (in) Capacity at F. OF S. 4:1 US tons Capacity at F. OF S. 2:1 US tons 4 1/2 3/8 - 1/2 2 1/2 5 6 3/4 8 16 6 3/4 12 24 8 3/4 8 16 8 3/4 12 24 8 1 1/8 22 44 10 5/8 - 3/4 8 16 10 3/4 12 24 10 1 1/8 22 44 12 5/8 - 3/4 8 16 12 3/4 12 24 12 1 1/8 22 44 14 3/4 12 24 14 1 1/8 22 44 Features Bearings The 4 1/2" Block is fitted with special bronze bush but can be fitted with taper roller bearings wIth special bronze bush if requested. Capacity The 4:1 capacity load given in the table are the maximum head fitting loads that should be applied to the Blocks.These capacity loads are based on a Fador of Safety of 4:1 and the Blocks are proof tested to twice this capacity load.The table also details a comparative capacity load at Fador of Safety2:1 so that the users may compare the 'High Load' Blocks with alternative makes based on this Lower Safety Fador. Double Sheave Light champion snatch block as a double sheave block. Drop forged swivel hook or swivel shackle. Can be furnished with bronze bushing and roller bearings. Opening features permits easy insertion of wire rope in both sheaveswith removal of one bolt. Can be furnished with hook latch. Pressurelube fittings. Fatigue rated.
Manilla Rope Pulley Block,, Dia. of Sheave, Dia of Rope, S. W. L. in kg, No. Sheave, 3 1/2, 1/2", 100, Single, 31/2, 1/2", 150, Double, 3 1-2, 1/2", 250, Triple, 4", 5/8, 150, Single, 4", 5/8, 200, Double, 4", 5/8, 300, Triple, 4 3/4, 3/4", 200, Single, 4 3/4, 3/4", 400, Double, 4 3/4, 3/4", 500, Triple, 6", 1", 500, Single, 6", 1", 1000, Double, 6", 1", 1500, Triple, 7", 1 1/4 600, Single, 7", 1 1/4, 1500, Double, 7", 1 1/4, 2000, Triple, 8", 1 1/2, 1000, Single, 8", 1 1/2, 2000, Double, 8", 1 1/2, 2500, Triple, 10", 2", 1500, Single, 10", 2", 2500, Double, 10", 2", 4000, Triple
Pool Type Anchor (CB 3221 - 84) Normal Weight, A, B, C, D, E, F 12, 385, 325, 275, 250, 65, 155, 20, 455, 385, 325, 300, 75, 185, 40, 570, 480, 410, 370, 95, 235, 60, 655, 555, 470, 425, 110, 270, 80, 720, 610, 515, 470, 120, 295, 100, 775, 655, 555, 505, 130, 320, 120, 825, 700, 595, 540, 135, 340, 160, 905, 765, 650, 590, 150, 370, 200, 975, 825, 700, 640, 160, 400, 240, 1040, 880, 745, 680, 175, 425, 280, 1090, 925, 780, 715, 180, 450, 320, 1140, 965, 820, 745, 190, 470, 360, 1190, 1005, 855, 780, 195, 490, 400, 1230, 1040, 885, 805, 205, 505, 440, 1270, 1075, 910, 830, 210, 90, 480, 1305, 1105, 940, 855, 215, 535, 520, 1340, 1135, 960, 875, 220, 550, 560, 1375, 1165, 985, 900, 230, 565, 600, 1410, 1195, 1010, 920, 235, 580, 640, 1440, 1220, 1035, 940, 240, 590, 720, 1495, 1265, 1075, 975, 250, 615, 800, 1550, 1310, 1115, 1015, 255, 635, 900, 1615, 1365, 1160, 1055, 270, 665, 1000, 1670, 1410, 1200, 1090, 275, 670, 1250, 1800, 1525, 1290, 1175, 300, 740, 1500, 1910, 1615, 1370, 1250, 315,
High Holding Anchor Sole selling agent in India of for Anchors Dazu Xingye Marine Casting Co. Ltd.
Sole selling agent in India of for Anchors Dazu Xingye Marine Casting Co. Ltd.
Single Chain Sling Two Leg Chain Sling Three Leg Sling Four leg Sling Double Loop Endless Sling Proof Load Testing After final heat treatment slings with accessories shall be tested as an assembly, multi- leg chain slings shall be tested in sections. Individual sections of the chain slings shall be subjected to 2.0 times the load to which the section will be subjected when the assembly is subjected to its working load limit in accordance with the plan. Lifting capacity of sling / working load limit (MT) Rating Single Branch slings Single branch slings shall have a working load limit equal to that of the Chain used in their construction Multi Branch slings Multi branch slings shall be rated at a uniform working load limit for an angle between branches of 90o-120o(45o- 60o to the vertical) or additionally a ta uniform working load limit for any angle between branches of 90o-120o(45o- 60o to the vertical ). Uniform Load Method Double branch slings For all angles between branches from 0°- 90° (0°- 45° to the vertical) WLL = 1.4 x WLL of a single branch made from similar chain. When additionally marked for angles between branches of 90°- 120° (45°- 60° to the vertical) WLL = 1 x WLL of single branch made from similar chain. Three and four branch slings For all angles between branches from 0°- 90° (0°- 45° to the vertical) WLL = 2.1 x WLL of a single branch made from similar chain. When additionally marked for angles between branches of 90°- 120° (45°- 60° to the vertical) WLL = 1.5 x WLL of single branch made from similar chain.
S-316N S-316A SHUR-LOC - Eye Hook Chain Size S-316A Stock No. Grade & Alloy chain working load limit(tons) 4:1 Wire Rope XIP IWRC Mechanical Splice Weight each kg in mm size (mm) Working load limit (tons) 5:1 6 1097918 1.12 8 0.9 0.39 1/4-5/16 7-8 1097920 2.0 11 1.7 0.82 3/8 10 1097921 3.15 13 2.3 1.47 1/2 13 1097922 5.3 16 3.5 2.70 5/8 16 1097926 8.0 22 6.9 5.78 * Ultimate Load is 4 times the Working Load Limit based on Grade 8 Chain. Positive Lock Latch is Self-Locking when hook is loaded Forged Alloy Steel- Quenched and Tempered Rated for both Wire Rope and Grade 8 Chain Meets ASTM A-952-96 and proposed Euronorm standards for Grade 8 chain fitting Fatigue rated. The SHUR-LOC-hook, if properly installed and locked, can be used for personnel applications and meets the intent of OSHA Rule 1926.550 (g) (4) (iv) (B) G-414 Heavy Thimble should be used with wire rope slings Individually Proof Tested at 2-1/2 times the Working Load Limit with certification Trigger repair Kit available (5-4316). Consist of spring, roll pin and trigger Designed with Engineered Flat to connect to Grade . 8 chain fittings.
Spek Type Anchor Anchor Weight, kg., Dimensions in mm, A, B, C, D, E, H, L, 380, 600, 827, 190, 412, 258, 780, 1080, 480, 650, 902, 205, 442, 280, 846, 1170, 610, 700, 960, 221, 472, 302, 910, 1260, 735, 750, 1030, 235, 502, 320, 975, 1350, 880, 800, 1100, 251, 542, 340, 1040, 1440, 1030, 850, 1170, 270, 568, 362, 1102, 1530, 11050, 900, 1240, 286, 587, 388, 1168, 1620, 1400, 950, 1299, 295, 644, 420, 1229, 1710, 1750, 1000, 1378, 316, 671, 442, 1300, 1800, 2020, 1050, 1454, 330, 706, 460, 1362, 1890, 2360, 1100, 1514, 343, 744, 480, 1424, 1980, 2750, 1150, 1584, 362, 788, 492, 1502, 2070, 3000, 1200, 1650, 380, 801, 520, 1560, 2160, 3700, 1350, 1850, 418, 890, 580, 1743, 2430, 4000, 1400, 1927, 438, 910, 610, 1813, 2520, 5100, 1450, 2000, 451, 954, 626, 1864, 2610, 5800, 1500, 2060, 467, 998, 642, 1946, 2700, 6600, 1550, 2138, 490, 1030, 660, 2006, 2790, 8000, 1700, 2333, 533, 1118, 734, 2210, 3060,
Undercarriage Worlds best undercarriage itr italy shanparts Undercarriage track parts for excavators, bulldozers and other track type machines are our speciality, and we are proud to be amongst indias largest stockists. We offer a reliable and economical solution to any undercarriage need. Our sourcing is from the worlds finest manufacturers only, who mainly supply to original equipment manufacturers (oems). Every part we sell has been built to the performance specifications required for the most rugged application. We ensure you get the undercarriage parts you want, the performance you need and the value you deserve. The itr undercarriage line is studied and designed in the engineering and r&d departments of the usco group using cad systems and with the collaboration of partner universities. A fundamental characteristic of the itr undercarriage product line is that its production is entirely managed in-house: from design of the component to the choice of material, through to production. Numerous quality controls are carried out starting from raw material purchasing based on the know-how and expertise in the field of metallurgical processes and metal materials. Broad expertise covers the entire complexity of the production process from die-casting to heat treatments to the assembly and painting lines. We are proud to be itr under carriages exclusive distributors in india. We stock: Track shoe assemblies Track link assemblies Track & carrier rollers Idlers Sprockets & segments Grouser shoes Recoil springs & track adjusters (tensioners) Track bolts + nuts Track guards
We offer world’s best quality tyre protection chain of lazar shanparts Loaders are the must of the stone and marble quarries, and tyre protection chains are the must of the loaders. Chains protect the expensive tyres of the loaders under the very though conditions of the quarries and also increases the traction and the handling capacity of the machine, with higher productivity per hour and lower down time. Experiences and numerous applications all over the world proofed that las zarh offers the best cost per hour performance at hot slag removing. The special link and mesh design and heat resistant formulated alloyed steel gives excellent results not only at hot slag but also at scrap, waste recycling and glass industry. Las zarh offers the longest life and the highest performance even underground and offers complete solutions for every kind of operation and every type of machine. They produce special design and dimension chains for every kind of mine site and every size of machines.
we are manufacturer of D SHACKLES in hot forge size M6-M100 and more as per client requirements and in all grades and standards
STANDARD - DIN, ASTM, BS and All International Standards. LENGTH - 3 mm to 200 mm. MACHINE SCREW SIZES- M1.6 - M12. FORMS: Nuts, Bolts, Screws, Sockets, Studs, Screw, Hex Set Screw, Socket Screw, Cap Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap Screw, Wing Screw, Washers, Spring Washers, Studs, Anchors, Marine Anchors, Nut, Hexagon Nut, Hex Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Socket Hexagon Head Screw Anchor Bolt, U-Bolts, J Bolts, Mushroom Head Square Neck Bolts, T-Hearl, Bolts, Wing Screw, Eye Bolt, Foundation Bolts, Structural Bolts.
a renowned manufacturer name when it comes to Chains and Sprockets. As well established and experienced chain sprocket manufacturers, we believe that with high quality, comes high precision, and with high precision comes reliability. Therefore, with our every product, we have laid a foundation of trust and reliability that ensures our customers products with quality and accuracy.
Mechanical parts means operational parts on a vehicle that wear out over time or have a finite useful life or duration typically shorter than the life of the vehicle as a whole.The main purpose of a machine is to make things easier for people, like lifting and moving heavy objects around,Engine, Electric motor, Actuator Shafts Couplings Belt, Chain, Cable drives Gear train Clutch Brake Flywheel Cam and follower systems Linkage Simple machine THIS CAN BE MADE IN ANY SUITABLE MATERIAL AS PER CLIENTS REQUIREMENT
