We are Manufacturer & Sole Owner of India's most reputed shuttering plywood brand-REEMACKS (IS-4990). Our brand has been performing so well that we have ZERO Complaints in the last 10 years as we have never compromised the quality.
Shuttering Plywood is a very important construction material and cost wise if the quality is not appropriate it does not give required repetitions. Our REEMACKS (IS-4990) Brand gives 10 assured repetitions.
MR grade plywood stands for Moisture Resistant plywood and is also known as Commercial plywood in India. It is suitable for indoor use and is an interior grade plywood. Although, the MR plywood is capable of resisting moisture and humidity
MR grade plywood stands for Moisture Resistant plywood and is also known as Commercial plywood in India. It is suitable for indoor use and is an interior grade plywood. Although, the MR plywood is capable of resisting moisture and humidity
MR grade plywood stands for Moisture Resistant plywood and is also known as Commercial plywood in India. It is suitable for indoor use and is an interior grade plywood. Although, the MR plywood is capable of resisting moisture and humidity
Made from plantation wood veneers with high density. These veneers are machine dried and bonded with Melamine Urea Formaldehyde resin, which is Moisture Resistant. We apply Unique GLP formula in the resin to make each plywood board borer and termite proof.
Core Veneer : :High Density Plantation Wood (Rubber Wood) Density: 700Kgs /Cubic Metre
Face Veneer : :Gurjan (Kruing) / Pine imported wood
Glue :Melamine Urea Formaldehyde
Grade : MR (Moisture resistant) Grade
Thickness in mm : 6, 9, 12, 15, 18, 21, 24
Size in mm : 1220 x 2440
Application :It is used for interior applications like false ceiling, partition,
furniture, portable cabins, office and hotel interiors, etc.
End fitment plywood is widely used by the BOPP or other specialty film manufacturers for packing their film rolls. Since film rolls are very expensive it needs immense care and very good quality packing material and used. We understand and value the customer need and always ensure quality of the end fitment plywood.
Core Veneer :High Density Plantation
Wood (Rubber Wood) : Density: 700Kgs /Cubic Metre
Face Veneer :Gurjan (Kruing)/ Pine
Glue : Melamine Urea Formaldehyde (Moisture resistant)
Grade : MR (Moisture Resistant) Grade
Thickness in mm :12 to 24MM
Size in mm : 485 x 485, 500 x 500,
610 x 610, 630 x 630,
650 x 650, 715 x 715,
700 x 750,
:700 x 700, 750 x 750,
800 x 850, 1000 x 1000 etc.
Application : Packing film rolls
Made from plantation wood veneers with high density. These veneers are machine dried and bonded with Melamine Urea Formaldehyde resin, which is Moisture Resistant. We apply Unique GLP formula in the resin to make each plywood board borer and termite proof...
Core Veneer :High Density Plantation Wood (Rubber Wood) Density: 700Kgs /Cubic Metre
Face Veneer :Gurjan (Kruing) / Pine imported wood
Glue :Melamine Urea Formaldehyde
Grade : MR (Moisture resistant) Grade
Thickness in mm : 6, 9, 12, 15, 18, 21, 24
Size in mm : 1220 x 2440
Application :It is used for interior applications like false ceiling, partition,
furniture, portable cabins, office and hotel interiors, etc.
Made from plantation wood veneers with high density. These veneers are machine dried and bonded with Melamine Urea Formaldehyde resin, which is Moisture Resistant. We apply Unique GLP formula in the resin to make each plywood board borer and termite proof...
Core Veneer :High Density Plantation Wood (Rubber Wood) Density: 700Kgs /Cubic Metre
Face Veneer :Gurjan (Kruing) / Pine imported wood
Glue :Melamine Urea Formaldehyde
Grade : MR (Moisture resistant) Grade
Thickness in mm : 6, 9, 12, 15, 18, 21, 24
Size in mm : 1220 x 2440
Application :It is used for interior applications like false ceiling, partition,
furniture, portable cabins, office and hotel interiors, etc.
Made from plantation wood veneers with high density. These veneers are machine dried and bonded with Melamine Urea Formaldehyde resin, which is Moisture Resistant. We apply Unique GLP formula in the resin to make each plywood board borer and termite proof...
Core Veneer :High Density Plantation Wood (Rubber Wood) Density: 700Kgs /Cubic Metre
Face Veneer :Gurjan (Kruing) / Pine imported wood
Glue :Melamine Urea Formaldehyde
Grade : MR (Moisture resistant) Grade
Thickness in mm : 6, 9, 12, 15, 18, 21, 24
Size in mm : 1220 x 2440
Application :It is used for interior applications like false ceiling, partition,
furniture, portable cabins, office and hotel interiors, etc.
WOODPECKERPLY Film Faced Concrete Shuttering Plywood is one of our premium products widely used for form (concrete shuttering) works across the globe. It is made using 100% eco-friendly plantation wood (rubber wood) veneers, which are as good as hardwood veneers with a density of 700 Kgs per CBM. These veneers are machine dried and bonded with high quality phenol formaldehyde (100% Boiling Water Proof) resin or MUF resin (Moisture Resistant) under controlled temperature and pressure. It is further covered with resin – treated paper that turns into a protective film during production. Edges are sealed with water based acrylic paint.
Surface Film: 125GSM Phenolic Film of Dynea Brand, Finland.
Face Veneer: Gurjan (Keruing)/ Pine imported wood
Core Veneer: Rubber Wood with density of 700 Kgs /CBM
Sizes: 1220/1250 MM (width) x 2440/2500 MM(length) x 12/15/18/21 MM(thickness)
Grades we have
MR (Moisture Resistant) Grade which facilitates 4 to 5 repetitions, depending
on handling and storage.
BWP (Boiling Water Proof) Grade which facilitates 10 to 12 repetitions,
depending on handling and storage.
Application:- Universally used for centering works for columns, beams, slabs etc.
Other uses are Outdoor furniture, structures,
vehicle body building, container flooring, etc.
Marine Plywood (100% BWP) is made of selected hardwood and plantation wood veneers. It is bonded with phenol formaldehyde resin to withstand extreme weather conditions and alternate wetting and drying. Further, the GLP formula helps to give overall protection against termites, borers and insects.
Core Veneer : High Density Plantation Wood (Eucalyptus/Silver Oak) Density: 700Kgs /Cubic Metre
Face Veneer : Gurjan (Kruing) imported hard wood
Glue : Phenol Formaldehyde (Prefere 4976 from Dynea AS Norway)
Grade : BWP , 72 Hours Boiling Water Proof
Thickness in mm : 6, 9, 12, 15, 18, 21 & 24
Size in mm : 1220 x 2440
Application : Boat building, kitchen cabinets, wardrobes, exterior furniture, etc.
Made from plantation wood veneers with high density. These veneers are machine dried and bonded with Melamine Urea Formaldehyde resin, which is Moisture Resistant. We apply Unique GLP formula in the resin to make each plywood board borer and termite proof...
Core Veneer : High Density Plantation Wood (Rubber Wood) Density: 700Kgs /Cubic Metre
Face Veneer :Gurjan (Kruing) / Pine imported wood
Glue :Melamine Urea Formaldehyde
Grade : MR (Moisture resistant) Grade
Thickness in mm : 6, 9, 12, 15, 18, 21, 24
Size in mm : 1220 x 2440
Application :It is used for interior applications like false ceiling, partition, furniture, portable cabins, office and hotel interiors, etc.
End fitment plywood is widely used by the BOPP or other specialty film manufacturers for packing their film rolls. Since film rolls are very expensive it needs immense care and very good quality packing material and used. We understand and value the customer need and always ensure quality of the end fitment plywood
Core Veneer :High Density Plantation
Wood (Rubber Wood) : Density: 700Kgs /Cubic Metre
Face Veneer :Gurjan (Kruing)/ Pine
Glue : Melamine Urea Formaldehyde (Moisture resistant)
Grade : MR (Moisture Resistant) Grade
Thickness in mm :12 to 24MM
Size in mm : 485 x 485, 500 x 500,
610 x 610, 630 x 630,
650 x 650, 715 x 715,
700 x 750,
:700 x 700, 750 x 750,
800 x 850, 1000 x 1000 etc.
Application : Packing film rolls
Made from plantation wood veneers with high density. These veneers are machine dried and bonded with Melamine Urea Formaldehyde resin, which is Moisture Resistant. We apply Unique GLP formula in the resin to make each plywood board borer and termite proof...
Core Veneer :High Density Plantation Wood (Rubber Wood) Density: 700Kgs /Cubic Metre
Face Veneer :Gurjan (Kruing) / Pine imported wood
Glue :Melamine Urea Formaldehyde
Grade : MR (Moisture resistant) Grade
Thickness in mm : 6, 9, 12, 15, 18, 21, 24
Size in mm : 1220 x 2440
Application :It is used for interior applications like false ceiling, partition,
furniture, portable cabins, office and hotel interiors, etc.
Made from plantation wood veneers with high density. These veneers are machine dried and bonded with Melamine Urea Formaldehyde resin, which is Moisture Resistant. We apply Unique GLP formula in the resin to make each plywood board borer and termite proof...
Core Veneer :High Density Plantation Wood (Rubber Wood) Density: 700Kgs /Cubic Metre
Face Veneer :Gurjan (Kruing) / Pine imported wood
Glue :Melamine Urea Formaldehyde
Grade : MR (Moisture resistant) Grade
Thickness in mm : 6, 9, 12, 15, 18, 21, 24
Size in mm : 1220 x 2440
Application :It is used for interior applications like false ceiling, partition,
furniture, portable cabins, office and hotel interiors, etc.
2423 Processed Wooden Boards Like Plywood Suppliers
Short on time? Let Processed Wooden Boards Like Plywood sellers contact you.
