PP Foot Valve
Astm A216 Gr. Wcb Gate Valves Flange Ends Asa-150#
L&T MAKE SS CF8M 1 PC BALL VALVE FLANGED ENDS TO ANSI B 16.5 RF ENDS , LEVER OPERATED
L&T MAKE CS ASTM A 216 Gr WCB API 600 Gate valve flange ends drilled to ANSI B 16.5 rF ends , Handwheel operated . API trim 08
All types and all size of Butterfly valve available.
A wide variety of valves are described in this section. All the valves are made of Borosilicate glass body and PTFE plugs so that process fluid comes into the contact of glass and PTFE only. Borosilicate glass body permits the visual checking of the operation. All the valves are suitable for operation under full vacuum conditions and a maximum temperature of 200ºC
We provide all types of valves as per the requirement of our clients
We provide all branded company's products in every size, quality and quantity as per customer requirement.
Pneumatic Control Valves
- This is a IBR approved in line FLOW CHECK VALVES for use in any application Water, Condensate, Liquid etc. - Ensure that there is no reverse flow in the line. - Maximum pressure 47.5 kg/cm2 at 105°c. - Material ASTM A 315 Gr. CF8M (SS 316). - Easy installation, fits between flanges joint in any class. - Sizes available 15 NB to 100 NB, large size available on request. - Valve must be fitted with the direction of flow being according to the direction arrow indicated on the body of the valve.
Sizes Available : 15 NB, 20 NB, 25 NB, 40 NB & 50 NB. Class 800 Options : IBR OR Non - IBR. Material : Forged Steel Body With SS Internals End Connections : Screwed BSPT Socket Weld Butt Weld Max. Temperature : 427o C Max. Pressure 139 kg / cm2
Three way valve which design for diverting or mixing service applications. A diverting service valve takes common stream and splits it into two outlet force, this configuration is used for applications such as level control and pump bypass control valve. Mixing service valve combines two fluid streams and discharges the mixed fluid to a common outlet ports this configuration is used for applications where two fluids need to be mixed the end result can range from temperature control to producing a new fluid. Three way valve actually performs of two opposite acting standard two way valves. So that use of one valve instead of two is very economical. Valves are available with hand wheel if required. Size : 15 NB to 300 NB Rating : IBR approved ANSI Class 150, 300 , 600 , 900 , 1500 & higher on request Body Materials : Carbon Steel (A216 Gr WCB) / Alloy Steel (A217 Gr WC6) / SS (CF 8M) Leakage Class : ANSI B 16.104 CL IV Range Ability : 40 : 1
Our pressure relief safety valve is designed as a pop up type valve. On exceeding set pressure the valve opens to discharge the excess built up pressure. After relieving excess pressure, the valve automatically returns to the original position. The bronze internals (Seat & Plug) ensure that there is no leakage while in operation. By replacing only the spring it is possible to change set pressure range. Sizes Available : 15 NB, 20 NB, 25 NB, 40 NB, 50 NB End Connections : Screwed BSP IBR Certificate : Available For IBR Applications Soft-Seating : Also Available For Air Application Maximum Operating Temperature : 235° C Available Range : Min. Blow Off Pressure 0.35 Kg/Cm2 Max. Blow Off Pressure 17.5 Kg / Cm2
PRDS Valves ( Combined Pressure Reducing Cum Desuperheating Valves ) Features : Our combine PRDS valve is a single seated globe type valve that combines pressure & temperature reduction in one compact solution. The high pressure, high temperature steam which enters the main branch, is reduced in pressure and then spray water is injected immediately after pressure reduction. The high velocity and turbulent flow conditions data present immediately following the pressure reduction allow for rapid atomization and absorption of the spray water thus effectively desuperheating the steam. Reduction of noise level due to mist formation by water is an added advantage. Size : 15 NB to 300 NB Rating : IBR approved ANSI Class 150, 300 , 600 , 900 , 1500 & higher on request. Body Materials : Carbon Steel (A216 Gr WCB) / Alloy Steel (A21? Gr WC6) / 55 (CF 8M) Leakage Class : ANSI B 16.104 CL IV Range Ability : 40 : 1
Sizes Available : 15 NB, 20 NB, 25 NB, 40 NB & 50 NB. Class 800 Options : IBR OR Non - IBR. Material : Forged Steel Body With SS Internals End Connections : Screwed BSPT Socket Weld Butt Weld Max. Temperature : 427o C Max. Pressure 139 kg / cm2
It is companyâ??s pride and prestige in having obtained ISO 9001: 2008 (Quality Management), ISO 14001: 2004 (Environmental Management), BS OHSAS 18001: 2007 (Occupational Health & Safety Management) Certified by TUV NORD- GERMANY. All Products are manufactured in accordance with the guidelines set by standardization institute all over the world such as the Indian Boiler Regulation (IBR), Manufacturers Standardization Society (MSS), American Petroleum Institute (API), and American Society of Mechanical Engineers (ASME). As a leading merchant exporter, Impetus Prolific Pvt Ltd has a very wide product range in its basket which includes ball valves, gate valve, Globe Valve, Non Return Valve, Butterfly Valve, Air Valve, Diaphragm Valve, Control Valve, Safety Valve, Pressure Reducing Valve, Pulp Valve, Needle Valve, Solenoid Valves Etc. We have products with all kind of material grade and qualified processes meeting International standards.
As a leading merchant exporter, Impetus Prolific Pvt. Ltd. has a very wide range of Industrial Pumps. We have Pumps with all kind of Material Grade and qualified processes meeting international Standards. Pumps served by us are highly acknowledged for their high efficiency, produce desired result as per requirement of individual. These are widely used for commercial, corporate, high-rise, drainage and agricultural water supply. INDUSTRY WE SERVE: Oil and Gas, Mining, Power generation, Chemical, Pulp and Paper, and General industrial markets.
Our organization is involved in exporting, trading and supplying an extensive range of Stainless Steel, Nickel Alloys, Carbon Steel, Alloy Steel, Other Ferrous and Non-Ferrous Metals to our clients. Used in various industrial applications, these plates are manufactured by the experienced professionals from high-quality raw material and advanced technology. STANDARD MATERIALS Stainless Steel, Nickel Alloys, Carbon Steel, Alloy Steel, Other Ferrous and Non-Ferrous Metals. STANDARDS FOR SHEETS Thickness: 0.25 mm and above Width: 6 mm to 2000 mm Length:1000 to 3000 mm STANDARDS FOR PLATES THICKNESS:3.00 mm and above WIDTH:1000 mm to 3200 mm LENGTH : 2438mm/3048mm/6069mm to13500mm
We have in store for our clients a wide range of Stainless Steel, Duplex Steel, Alloy Steel Rods that are highly appreciated in the market for their sturdiness and high quality. These are made using high grade materials and are provided to our client in a variety of lengths and width parameters as per their requirements. We also take bulk orders for our clients and ensure its timely delivery and make sure that the client does not face any delays with orders. These steel round bars are available to our clients at leading industry prices. STANDARD MATERIALS Stainless Steel: 304/304L, 316/316L/316Ti, 321,310/310S,317/317L, 347, 17-4Ph, 15-5Ph, 904L, 410,420, 430, 431, 430F, 416, 440C Duplex Steel: UNS 31803, UNS 32205, UNS 32750, UNS 32760 Alloy Steel: F5, F9, F11, F12, F91. Carbon Steel, Mild Steel, (EN Series) STANDARDS SIZE Bright Bars: From 5mm Dia up to 350mm Dia Black Bars: From 16mm Dia up to 350mm Dia Square Bars: From 5mm Dia up to 250mm Dia Hex Bars: From 5mm Dia up to 150mm Dia Wires: 0.1mm Dia to 5mm Dia Welding Electrodes: 2.6mm to 4mm Dia Condition: Rolled, Forged, Annealed, Picked, Hot Rolled, Cold Roll
We are organization engaged in supplying and exporting industrial pipes with best in class quality. We are a leading name, which is engaged in offering a comprehensive range of Stainless Steel, Carbon Steel & Alloy Steel Product. The offered range is manufactured utilizing superior grade raw material such as stainless steel and allied, procured from reliable vendors of the market. In addition to this, the offered range is tested on different parameters to ensure its tandem with the highest quality norms and standards. We provide different ranges like round, square, Welded, Seamless etc. THE SALIENT FEATURES ARE AS FOLLOWS : - Excellent mechanical & magnetic properties - High thermal & electrical conductivity - Low gas content & vapor- pressure - Value Added Services - Hot Dipped Galvanizing - Epoxy & Fbe Coating - Electro Polish - Draw & Expansion STANDARD MATERIALS Stainless Steel: Stainless Steel 202, 303, 304, 304L, 309, 310, 316, 316L, 316TI, 317, 317L, 321, 410, 416, 420, 430, 440C, 904L Carbon Steel: ASTM A53 GR. B/ A106 GR B/API 5L GRADE B/ API 5L GR.X42/46/52/56/60/65/70/ A333 GR. 3/GR. 6 etc. Alloy Steel: ASTM A335 GR.P1/P5/P9/P11/P12/P22/P23/P91 etc. STANDARDS - Type: Seamless and Welded - Size:Upto 24" NB - Standard:Sch. 5s to Sch. XXS - Form:Round, Square and Rectangular
