We are leading manufacturers of Activated Carbon Blocks, made from high Surface Area, low ash coconut based Activated Carbon with high adsorption efficiency and contaminant removal capacity. The blocks remove chlorine, bad taste, odor and organic chemicals that contribute to bad taste. They are suitable for use as Pre and Post Reverse Osmosis Systems in CTO BLOCKS (Color Taste Odor Removal) residential and commercial water purification. FEATURES & BENEFITS â?? Manufactured from coconut shell based low ash, micro porous Activated Carbon. â?? Designed to be used in most standard size housings. â?? High adsorptive capacity. â?? Simultaneously removes chlorine, bad taste, odour and organic contaminants from water. â?? Provides particular filtration and high dirt capacity.
One of the main applications of granular activated carbon is the purification of water. Its function is the retention of organic contaminants and the elimination, by chemical reaction, of the free residual chlorine that remains in the water after the disinfection stage. The removal of free chlorine takes place in the first few centimeters of the carbon bed, so there is no longer any protection against bacterial growth in the rest of the bed. Sooner or later, bacteria can enter from a poorly disinfected influent, or from some point in the effluent pipe. This may happen mainly when there is no water circulation while the equipment is out of service. Bacteria reproduce, and turn the carbon bed into a source of contamination. In order to inhibit bacterial growth, the surface of the carbon is impregnated with 0.1% metallic silver to make carbon bacteriostatic using ionic silver to enable it to bind strongly with carbon surface to make it suitable to function and purify large volumes of water. FEATURES & BENEFITS â?? High efficiency â?? Negligible silver leaching â?? No health hazards to humans â?? No loss in Bacteriostatic property up to 6000 litres water â?? Available in Granular and block form
Powder active carbon (PAC) is finely crushed and divided carbon and used in the different mesh size, PAC is a versatile adsorbent and is used in food and pharmaceutical industries, as catalyst support, refining process, etc. Pulverization is the technique used to produce the powder active carbon from Granular carbon and we produce and supply up to 325 mesh size PAC. We manufacture PAC based on wood as well as coconut shell, depending on the requirement of the customer.
Active carbon contains large amount of acid soluble inorganic material depending on the precursor and its source of origin. Active carbon has very high capacity to adsorb organics, inorganics, bad taste and odour material. Adsorption capacity is enhance by modifications such as acid washing because this modification removes the acid soluble inorganic materials from the carbon and make it more porous, efficient and useful for various liquid process applications such as waste water treatment, water purification, decolourisation process in chemical and pharmaceutical industries, food and beverage industry for many purposes such as decolourization of sugar, dechlorination, decaffeination, purification of organic compounds,etc. We manufacture acid washed active carbons as per the customer requirements for the applications mentioned above. FEATURES & BENEFITS Some of the benefits of Acid Wash carbon include Dechlorination of water, better taste, removal of bad odors, removal of color from water, removal of organic substances, etc. Acid wash carbon has extensive internal structure, neutral surface, maximum hardness, extended operational life, high volume activity, and rapid pH stabilization. Acid wash carbon is used in various applications such as Condensate de-oiling, semiconductor process water, and protection of reverse osmosis membranes from chlorine and organic fouling.
Mercury and its compounds are cumulative toxins that are harmful to most forms of life even when taken in very small amounts. Itâ??s unique properties allow widespread applications across the paper and pulp industry, chemical processors, agricultural industries, specialized battery producers, and chloroalkali manufacturers. It is also found naturally in coalâ??which is released on burning in power plants and heat generators, in oxygenated watersâ??which eventually accumulates in fish, and in air and natural gas. Activated carbons are an excellent solution to control the widespread discharge of elemental mercury and its salts. FEATURES & BENEFITS Specially designed to treat a variety of flue gas compositions, high adsorption capacity for many pollutants with exceptional mercury removal rates and low carbon usage. Most commonly used adsorbents for removal of pollutants and treatment of wastewater
Naphtha is aromatic low density fuel consumed internally in refinery for production of Petrol and Hydrogen. Used as a feed, unutilized production is sold to petrochemical and other industries like fertilizers etc For price, specification and other details please contact us.
Its made from graphite.
GRADE 100-180-180-280-380 For price and specifications please email LOI with company profile.
GOST 10585-75 & 10585-99 For price and specifications please email LOI with company profile
In industrial applications, it is often useful to modify the crystal properties of the paraffin wax, typically by adding branching to the existing carbon backbone chain. Paraffin waxes are used in dozens of applications in including: candles, corrugated boxes, paper coating, board sizing, and many other applications. For price and specifications please contact us.
Fuel oil, also called furnace oil, fuel consisting mainly of residues from crude-oil distillation. It is used primarily for steam boilers in power plants, aboard ships, and in industrial plants For specification and price please contact us
Microcrystalline waxes are chemically inert. The ratio of iso-paraffinic hydrocarbons and naphthenic hydrocarbons is higher for micros than for paraffin waxes. Micro waxes can be used for chewing gum base, cosmetics, ointments where they harden, lubricate and protect against moisture, food packaging, protecting against moisture through wax impregnated paper, film, foil, and corrugated board, increasing the fluidity and the flexible bonding of hot-melt adhesives, crayons, candles and insulating materials. For price, specification and other details please contact us.
Slack Wax is mixture of paraffin wax and oil originated from petroleum crude oil. Slack Wax oil content can range from 10% to 30% The traditional usage of Paraffin Slack Wax is in the production of fully refined paraffin wax. And other major usage are for particle board and medium density fiberboard, cable filing compound , matches, candles, rust protective products and moisture vapor barriers. For price, specification and other details please contact us
Fischer Tropsch wax is a synthetic wax produced by the polymerization of carbon monoxide under high pressure, a technology used in the emerging natural Gas to Liquid (GTL) projects. The hydrocarbon product of FT reaction is distilled to separate the mix into fuels products and waxes with melting points ranging from about 45 - 106C. For price, specification and other details please contact us.
White oil is also known as liquid paraffin wax, which is a highly refined mineral oils with characteristics of extremely pure, stable, colorless, odorless, non-toxic and chemically inert. These attributes make them perfect for any application that values these properties, such as pharmaceuticals, cosmetics and chemical processing. The term "white oil" is a misnomer, in that they are not white at all, but crystal clear. White oils can be produced from a variety of feedstocks, depending on the process used. These starting materials include conventional base stocks for the older acid treatment process to Vacuum Gas Oils (VGO) for the more currently widely used two stage hydrotreating method. Both processes produce colorless, odorless, tasteless oils where all components that might have any detrimental effects on their end usage, such as aromatics, sulphur or other impurities, have essentially been removed, resulting in a pure and thermally stable product Liquid paraffin has different flash points: 100, 120, 140 and 180, liquid paraffin (White oil) is produced for use in textile, spinning, industrial lubrication equipment, health products, produce clouds (polystyrene) according to its grades.
Biofuels, in particular biodiesel has been found to be a good replacement to petro-diesel. This is because biodiesel provides quite a number of advantages among others including renewability, biodegradability, regional and agriculture development, and lower gaseous emissions Besides, renewable resources such as fats and vegetable oils, when converted to biodiesel fuel take away more carbon-dioxide from the atmosphere during their production than is added to it by later combustion. Therefore, it lessens the increasing carbon-dioxide content of the atmosphere as well as substantial reduction in PM, HC and CO emissions Typically, biodiesel could significantly reduce unburned total hydrocarbons (THCs), and carbon monoxide (CO) and nitric oxides (NOx) In addition, biodiesel fuel offers engine performance similar to the one of petroleum & diesel fuel.Please contact us for more information on our dedicated product line for biodiesel and renewable diesel.
Carbon black is mainly used as a reinforcing filler in tires and other rubber products. In plastics, paints, and inks, carbon black is used as a color pigment For more details please contact us.
Carbon Pads
It is dust collector carbon packed in Jumbo bags. It is all of tyre plant. Weight around- 19 MTs. Inspection possible and pickup as and where basis. Please request for photos if needed or call or email me if interested. Price- Exworks- Rs 32/- per Kg. Only serious buyer contact me. Material is ready to load.
White Mineral Oil