BRIGHTOMNI BBU-L is a Tetrasulpho type optical whitener used in Paper size press, coating and wet end applications,to achieve high whiteness and brightness properties of Paper. BRIGHTOMNI BBU-L Liquid is special Optical Brightener of medium affinity Tetra Sulpho OBA for paper. It is an innovative OBA for the WET END application in acidic to neutral media (pH 4-7). BBU-L has a broad spectrum of application and has good compatibility with Acids & Alum. Average dosage 0.2 to 6.0 g/L with size press liquor. BRIGHTOMNI BBU-L can perform with conventional Starch at the size press. Also together with CMC, PVA and anionic and slightly synthetic sizing additives. It can be a ready use optical whitener in size press. This product is used to attain moderate to high whiteness.
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brightener Available for Paper application like... Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%
Since SIZEOMNI 40S is cationic can be used in combination with weakly cationic auxiliaries. For adding SIZEOMNI 40S, the pH of solution should be 4. For enhance the SIZEOMNI 40S performance, cationic fixing agent should be required. Application of SIZEOMNI 40S in the size press changes the wet ability of the paper and reduces its water absorption. The presence of aluminium ions in the base paper is not necessary for obtaining optimum results. Since SIZEOMNI 40S is cationic, it cannot be applied in the size press with fluorescent whiteners and normal dyes or basic dyes. Only cationic dyes can be added in the solution. The normal drying temperatures on the paper machine are sufficient to develop full sizing. No additional curing period is required. SIZEOMNI 40S has good stability in the presence of large quantities of electrolytes. SIZEOMNI 40S can be added batch-wise to the starch solution storage tank as well as continuously in the operating tank or the feeding pipe to the size press. SIZEOMNI 40S is low foaming, so defoamers are normally not required.
With the product name "SOFTOMNI 2000" is a proprietary formulated alkaline sizing agent. ALKYL KETENE DIMER (AKD) emulsion, designed to size the paper in the neutral to alkaline ph range of 6.5 to 8.5 SOFTOMNI is a free flowing white emulsion stable to size any type of furnishes preferably containing calcium carbonate. Different type of furnishes require different application method and dosages. SOFTOMNI 2000 is added as such (can be diluted with water to the maximum extent of 1:3 ratio) in the thick stock by diaphragm type of dosing pump. Addition of SOFTOMNI 2000 before filler is preferable to get best sizing effect. The efficiency of ALKYL KETENE DIMER depends on the retention and drainage aid program. The higher the drainage, first pass retention and first pass ash retention, optimum is the efficiency of AKD. A cationic scavenger in necessary where there is high levels of anionic trash in the furnish like deinked pulp.
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brightener Available for Paper application like... Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%
With our product name BONDOMNI 420 G, We produce SAE Anionic Surface Sizing Agent. Since BONDOMNI 420 G is anionic can be used in combination with weakly cationic auxiliaries. Application of BONDOMNI 420 G in the size press changes the wet ability of the Paper and reduces its water absorption. The presence of aluminium ions in the base Paper is not necessary for obtaining optimum results. Since BONDOMNI 420 G is anionic, it can be applied in the size press with fluorescent whiteners, direct dyes or basic dyes. The normal drying temperatures on the Paper machine are sufficient to develop full sizing. No additional curing period is required. It has good stability in the presence of large quantities of electrolytes.
STRENGTHOMNI 6033 is a cationic polyamide wet strength resin supplied as an aqueous solution containing 30%++ solids. When applied under acidic or alkaline stock conditions, STRENGTHOMNI 6033 will efficiently increase the wet strength properties of finished paper or paperboard products. STRENGTHOMNI 6033 resin is highly effective for developing wet strength in facial tissue, napkins, towels, carrier board, liquid packaging, bag paper, linerboard, medium, and other specialty papers. STRENGTHOMNI 6033 performs over a broad pH range of 4.0 9.0 (with best efficiency between 6.5 - 8.0) in the presence of normal papermaking additives. Apart from this, we also produce AKD Sizing Agent, SAE Anionic for Sizing, Fixing Agent / Coagulants, Optical Brightener.
Butter Paper 40 Gsm To 80 Gsm..Manufacturer.
A4 size papers with premium quality , we supply all over the world. Origin - India, direct from the manufactures
Paper like different sized reams like a4, a5, a3, alkaline paper, anti rust papers, anti tarnish papers, art paper, board, barograph papers, bond paper.Clearing agent, transportation & shipping
Thermal Rolls..
1) Superior Quality Thermal Paper Roll 2) Premium quality 3) Darker Print 4) Smooth Finishing 5) Full Speed
Paper Bowl With Paper Lids:- Size of Bowl - 150/200/240/350/500 ML Size of Paper Lids - 80/90MM, 350/500ML Paper Lid For Bowl GSM - Customize As Per Requirement Printing - Customize As Per Requirement Packaging - 500 Pcs Per Carton OEM - Yes Origin - India Minimum Order Quantity - 1 40ft HQ Container
A4 paper a3 paper df pen.