Smart Master Coat is a polymer based chemical coating with dual features of Water & Heat Proofing which can be used in various areas from foundation to the terrace of the building. Advance technology has been applied to make â??smartâ?? material so as to ensure that buildings are safe, energy efficient & have enhanced life. What Is Smart Master Coat ? 100% water proofing. Up to 85% heat proofing. Anti rust on fresh metal surfaces. Anti bacterial, Anti fungal. Termite Resistant Safe for drinking water storage tank. Washable. Water resistant. High adhesion.
Anaerobic, silicone polyurethane, epoxy, rubber, cyanoacrylate, polysulphide, acrylic, specialty coatings and paints.
Handmade crafts and paintings.
Paints, wall paints, wash basin.
Decorative wall paints, water base paints, oil base paints, varnish, melamine and wood finish, wood stains, universal stainer and other indiatrial and automotive paints.Manufacturing
Enamel Paints .
Primers.
Ethylene copolymer emulsion.
Aerosol Spray Paint.
Inverted marking paint spray.
Wire enamel-insulating varnish.
Furniture Paint.
Tin plated aerosol spray cans.
Furniture.
Painting And Sketches, Drawing Etc.
Thinners, white spirit, teak oil, wood coatings.Manufacturer & exporter
Lime, hydrated lime, quick lime, burnt lime, construction lime, paints.
Description Two-component, air drying polyurethane based clear. Recommended Use :- This product is recommended Top coat for glossy , uv protection,weather property and also as penetrating primer on bare concrete, wooden substrate prior to application of subsequent coating system. Physical Data :- COLOUR : Clear FINISH : Smooth & Glossy SOLIDS BY VOLUME : 40 �± 3% THEORETICAL SPREADING RATE : 16 sq.mt / ltr at a DFT of 25 �µ FLASH POINT : Base : Above 23�°C Hardener : Above 23�°C DRYING CHARACTERISTICS (At 65% Relative Humidity & at 30C) : HARD DRY : Overnight FULL CURE : 7 Days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation New concrete should be cured for at least 1 month prior to paint application. Ensure concrete surface is absolutely dry and free from moisture, oil, laitance, dust and dirt. For old concrete, ensure surface is free from oil, grease, algal & fungal growth and any old coating. Sand Blasting on concrete gives the best performance and should be given first preference out of the available surface preparation methods. If blasting is impracticable, Acid Etching with diluted Hydrochloric Acid followed by fresh water washing to be adopted. Seasoned wooden articles should be scuffed with Emery 220/400 to achieve smooth surface. Please refer our Directive Sheet on Surface Preparation. Application Data MIXING RATIO : Base : Hardener (As per our recommendations) APPLICATION : By Brush / By Conventional Spray THINNER : Type 290 POT LIFE : 3 hours min at 30�° C RECOMMENDED DFT : 30-40 �µ. OVERCOATING INTERVAL : MIN : 8 hours MAX : Indefinite COMPATIBILITY : Can be applied on Epoxy primers and oleo-resinous primer and coated / over coated by two component paints like Epoxy, PU, etc.
AFFIX 1K  PU COATING water proofing  is a single component liquid applied, highly permanent elastomeric polyurethane based coating. It is designed to give long lasting, cold curing, maintenance free and superior waterproofing protection for concrete and steel substrates. It is UV stable coating and specially formulated for external applications.
Acrylic Lacquer coating is a Acrylic based high gloss and scratch proof clear lacuqer coating for applying on cement concrete block, paver block, reflective interlocking glossy block, chequered tiles. they give more coverage area and give more shining with reflective surface.
