output voltages ranging from 012V, 5Amp R-core Transformers are manufactured using the unique rectangular core with round cross section known as R-core. The special feature of this transformer is that the core is gap less and continuous. The winding is done on special round bobbins on two parallel legs of the core. Design The core is continuous and gapless, with two balanced windings on either side. The winding is done on special round bobbins on the two parallel legs of the core. Size R-core transformers are smaller and have a lower profile than E-I core transformers of the same capacity. Temperature rise R-core transformers have a lower temperature rise due to the round cross sectional area and tapered slitting. Noise R-core transformers have low noise due to the balanced winding and low flux leakage. This makes them suitable for use in noise sensitive equipments. Leakage flux R-core transformers have a leakage flux that is about 1/10th of conventional transformers. This allows the transformer to be placed close to critical electronic components.
An EI transformer is a type of transformer with a core made of thin electrical steel sheets that are stacked to form the letters E and I. The primary and secondary windings are wound on bobbins, which are then placed on spindles to apply the windings.
FEATURES Feasibility of integrating slab production and block dressing within a single machine. Capability to cut larger blocks, with dimensions of up to 3.5 meters in width and 2.3 meters in height. HIGHLIGHTS Operators can perform field replacement of all rubbers on the machine flywheels, as they are universally fitted for ease of maintenance. The seven-wire machine is equipped with strategically positioned inspection ports, facilitating efficient adjustment of slab thickness. Specifications Overview Model: 7+1X No Wire: 7+1 Wire Diameter: 6.3 mm Dimensions: 3500 mm (L) x 2400 mm (W) x 2300 mm (H) No of Slabs for 2cm Thickness: 7 No of Slabs for 3cm Thickness: 5 Wire Speed: 0-35 m/min Main Power: 30 hp Total Installed Power: 45 hp Up-Down Motion: Lead Screw Panel Type: PLC Cable Make: IGUS (German Make) Protection: IP 54/55 Model: 15X No Wire: 15 Wire Diameter: 6.3 mm Dimensions: 3500 mm (L) x 2400 mm (W) x 2300 mm (H) No of Slabs for 2cm Thickness: 15 No of Slabs for 3cm Thickness: 11 Wire Speed: 0-35 m/min Main Power: 75 hp Total Installed Power: 90 hp Up-Down Motion: Lead Screw Panel Type: PLC Cable Make: IGUS (German Make) Protection: IP 54/55 Model: 46X No Wire: 46 Wire Diameter: 6.3 mm Dimensions: 3500 mm (L) x 2400 mm (W) x 2300 mm (H) No of Slabs for 2cm Thickness: 46 No of Slabs for 3cm Thickness: 35 Wire Speed: 0-35 m/min Main Power: 180 hp Total Installed Power: 200 hp Up-Down Motion: Lead Screw Panel Type: PLC Cable Make: IGUS (German Make) Protection: IP 54/55 Model: 76X No Wire: 76 Wire Diameter: 6.3 mm Dimensions: 3500 mm (L) x 2400 mm (W) x 2300 mm (H) No of Slabs for 2cm Thickness: 76 No of Slabs for 3cm Thickness: 57 Wire Speed: 0-35 m/min Main Power: 340 hp Total Installed Power: 360 hp Up-Down Motion: Lead Screw Panel Type: PLC Cable Make: IGUS (German Make) Protection: IP 54/55
Black mass 8 MT - 7% Cobalt - 8% Nickle
Glass Agencies are Manufacturer of Slit Lamp.
Discover unbeatable washing machine prices at Panasonic Store. Browse their wide selection of top-quality washing machines designed to meet your laundry needs. Enjoy advanced features, energy efficiency, and great deals. Shop now and find the perfect washing machine at the best price.
Common Meter Reading Instrument (CMRI) is a handheld computer used to download data from electronic tri-vector meters, supporting different protocols like IEC, ANSI and PACT. CMRI is also compliant to IS-15959/ DLMS (IEC-62056) standard. CMRI can be interfaced with the portable printer for spot billing applications. SANDS CMRI-1010 comes with LCD Graphical (3.5â?? TFT) & 15Line x 40 Characters visibility is rugged to withstand drop on to concrete and waterproof. CMRI is available with a memory size of 512 MB. Features Electronic reports for Static Tri-Vector Meter data No manual intervention & error-free reports Universal report generation irrespective of meter make Reports affecting activities like energy accounting, technical loss. calculation & deriving industry load patterns HT service meter reports in comparison to the respective Feeder Meter data Consolidated consumer reports for quick reference for higher-level management High Speed (HS) communication Complied with Common DLMS S/W ACCESSORIES Optical Probes Universal Probe for Multiple Protocols Zero Powered Probes USB type probe (USB 2.0) Impact Printer 2 Inch paper width High speed printing Long ribbon life RS-232/Bluetooth Interface
The DLMS meter reading application runs on Android mobile devices. It is an effective and efficient meter reading solution for DLMS meters (IEC-62056) & Smart meters (IS-16444). This application supports reading and Real-time viewing of field meter profiles, data view, programming the meter, smart meters connect / disconnect. This is also a solution to address the last mile connectivity issues- where the AMR and AMI networks failed due to network problem. Features SANDS DLMS meter reading application is an effective solution for reading, configuring, and controlling the DLMS meters. Simple and user-friendly GUI. Supports all leading meter manufacturers DLMS meters (Tested with 30 makes of both single-phase and three-phase meters). Real-time data profile view, using compact BCS supports both graphical and tabular report formats.
IOT-Based fastest tri-axial vibration & Noise (10kHz) in a single analyzer in the market (Data Refresh rate every 1 sec). Quick collect, route based collect and vibration analysis in a single unit. Monitor a broad range of machinery â?? from variable speed machines, complex gearbox, high-speed spindles & Low speed bearings. Wireless MEMS based tri-axial vibrations measuring range up to +/- 16g & Sampling rate 26.7 kHz. Offers Velocity, Acceleration and displacement â?? Overall RMS values, TWF & FFT Spectrums. AI & ML based alerts will give the health condition of the equipment as per ISO-10816 standards. Routine data collection and Real Time spectrums can be viewed and logged to mobile app
A cable tie (also known as a hose tie, tie wrap, wire tie, zap-straps, or zip tie) is a type of fastener for holding items together, primarily electrical cables and wires. Because of their low cost, ease of use, and binding strength, cable ties are ubiquitous, finding use in a wide range of other applications.
Electrical Sockets Generally, we see 2-pin, 3-pin and 5-pin sockets in our homes and offices. The other thing that differentiates sockets is voltage capacity, i.e., the amount of current it can pass. In India, the three-pin plug is rated at 6A / 250V.
We have all kinds of electrical wires (Flexible wires, cables, telecommunication cables, submersible cables).
Our MCB is an automatically operated electrical switch. Miniature circuit breakers are intended to prevent damage to an electrical circuit as a result of excess current. They are designed to trip during an overload or short circuit to protect against electrical faults and equipment failure.
Residual Current Circuit Breaker or RCCB is basically a gadget that senses current and disengages any low voltage (uneven current) circuit whenever a fault occurs. The main purpose of installing a Residual Current Circuit Breaker fundamentally is to protect people from electric shocks or death caused by them.
Distribution board is also called a panel board, breaker panel, electric panel or DB box. Its main function is to divide the electrical power evenly among all the electrical devices. The primary functions also include power generation, transmission and distribution.
With extensive research and development along with the finest conclusions Havells has developed the best in class products and are addressing the continuously changing requirements of our treasured customers. The growth in the flexible cables category has been brought about by bringing new and improved things to the interest of our customers. If there is something that is required everywhere irrespective of the genre of work being done, it is undoubtedly flexible cables. Whatever the type of construction, industrial work, or domestic installation is being done, cables are always an integral part. Havells range of cables includes heat resistant flame retardant cables, flame retardant low smoke cables, halogen free flame retardant cables, flame retardant with lifeline, multicore round cables, flat submersible cables, telecom switch board, CATV coaxial cables, LAN cables, CCTV cables and speaker cables. Our entire range is highly reliable and safeguards all your appliances while doing the job. Get all this and much more at the best prices online, only on the Havells Shop.
MS Conduit Junction Box allows the connection of wires in a neat and easily accessible form. Manufactured from durable mild steel material with the help of our highly advanced machine, the fittings are available in a variety of shapes and sizes to suit the specific needs of the clients and the electrical setup. Black Enamel, Hot Dip G I & Powder Coated.
Single Core Flexible Cable Basic Information Conductor: Stranded Copper Conductor of Class 5 (Flexible) Insulation: PVC Compound. Conductor Color: Red, Blue, Green, Yellow, Brown, Black, Grey, White, Pink, Orange, Yellow/Green. Temperature Range:-30 70 Nominal Voltage:300/500V, 450/750 V.
This box is manufactured using the finest quality mild steel and contemporary technology by our deft professionals. The offered box is highly acknowledged by our admirable clients for its corrosion resistant property and durability, thus finding its wide application around electrical appliances.
2 Pole of MCB BOX IN WHICH 1 OR 2 MCB'S OF SINGLE POLE CAN BE POSITIONED. USED IN INDUSTRIES, HOUSES, OUTDOOR FITTINGS, POLES, WAREHOUSES, FACTORIES.
