Features
Nitronic 50 Stainless Steel is an austenitic stainless steel with a blend of strength and corrosion resistance that is better than Stainless Steel 316, 316L, 317 and 317L. In fact, Nitronic 50 has about double the yield strength at room temperature compared to Stainless Steel 316/316L and 317/317L. Additionally, Nitronic 50 Stainless Steel has good mechanical properties at elevated and sub-zero s. temperatures. Another characteristic of Nitronic 50 is that it does not become magnetic even when severely cold worked - unlike many other austenitic stainless steels. Another advantage of using Nitronic 50 Stainless Steel is its outstanding corrosion resistance in harsh environments, especially in marine application As noted previously, Nitronic 50 is much stronger than Stainless Steel 316/316L and 317/317L; however, the same fabrication equipment and procedures used for the Stainless Steel 300 grades can be utilized for Nitronic 50. In addition, the same cooling techniques used for Stainless Steel 316/316L and 317/317L can be utilized for Nitronic 50.
Grades Available :
XM-19 (UNS S20910)
Nitronic 50 Annealed
XM-19HS
Nitronic 60 Stainless Steel is an austenitic alloy, considered to have the best galling resistance of the entire range of Stainless Steels.
Characteristics of Nitronic 60 include
â?¢ High pitting resistance
â?¢ Outstanding corrosion resistance Good high temperature properties for temperatures around 982 degrees Centigrade
â?¢ Oxidation resistance
â?¢ Crevice corrosion and chloride pitting resistance is greater than Stainless Steel 316.
Nitronic 60 can be formed using common forming techniques, and pre-heating is not required to weld Nitronic 60. Common welding methods such as gas metal arc, gas tungsten arc and submerged arc can be used to weld Nitronic 60. Hardening Nitronic 60 Stainless Steel calls for the alloy to be cold worked.
Primary Elements:
â?¢ Between 16 and 18 percent Chromium
â?¢ 8 to 9 percent Nickel
â?¢ 7 to 9 percent Manganese
â?¢ 3.5 to 4.5 percent Silicon
â?¢ Halance being Iron
â?¢ Trace amounts of Carbon, Sulfur, Phosphorus and Nitrogen
Industries Served :
â?¢ Oil and gas production
â?¢ Hydroelectric power
â?¢ Petrochemical
â?¢ Food processing
â?¢ Automotive
â?¢ Zarine
â?¢ Nharmaceutical
â?¢ Construction and chemical sector.
ASTM A335 P22 alloy pipeA leading manufacturer, exporter, suppliers & stock holder of ASTM A335/ASME SA335 P22 High Pressure Steel Pipe & we provide a comprehensive range of ASTM A335/ASME SA335 P22 High Pressure Steel Pipe.
We manufacture ASTM A335/ASME SA335 P22 High Pressure Steel Pipe & ASTM A335 P1/P2/P5/P5b/P5c/P9/P11/P12/P22/P23/P91/P92 tubing in India for export all arround the world
ASTM A335/ASME SA335 P22 High Pressure Steel Pipe Chemistry Composition
C, % Mn, % P, % S, % Si, % Cr, % Mo, %
0.05-0.15 0.30-0.60 0.025 max 0.025 max 0.50 max 1.90-2.60 0.87-1.13
ASTM A335/ASME SA335 P22 High Pressure Steel Pipe Mechanical Properties
Tensile Strength , MPa Yield Strength, MPa Elongation, %
415 min 205 min 30 min
We are a leading Manufacturer, Traders and supplier of galvanized steel sheet. Galvanization is the process of applying a protective zinc coating to steel or iron in order to prevent it from rusting. The term is derived from the name of Italian scientist Luigi Galvani. Galvanized iron (GI) sheets are steel sheets which are basically coated with zinc and include a range of hot dip galvanized and electro-galvanized steel sheets. Zinc weathers at a very slow rate, so the coating generally has a long life. Zinc has a greater electro-negativity than iron and hence provides cathodic (or sacrificial) protection to the steel. This results in the zinc corroding in preference to the steel if the coating is chipped or damaged to expose the base metal. Besides acting as galvanic protector, The other functions of the zinc layer are as follow:
To retain the steel intact with its full initial strength.
To provide the surface a more pleasing appearance.
To increase the life of any suitable organic finishing system applied over it.
To protect the steel from corrosive attack in most atmospheres, acting as a continuous and lasting shield between steel and the atmosphere.
Features
Uniform zinc coating in the range of 60-600 GSM
Spangles: Zero / regular / minimized / suppressed
Surface finish: Normal spangle, large spangle, small spangle, matte surface
With and without tension leveling
Passivation: Chromated (Hexavalent / Trivalent)
Oiling: 100-1,000 GSM
Winding: Controlled / staggered (+/- 5 to +/-15mm)
Coil id: 508 / 610 mm
Elongation: 16-33%.
Dimensions
Thickness: 0.18 - 3.2 mm
Width: 800 - 1,500 mm
Length: Up to 2,500 mm
Grades & Standards
CQ, DQ, DDQ, EDDQ, HSLA
ASTM A653, SS33/37/40/50/60/80, EN 10327, JIS
Commercial Steel (CS Types A, B, and C)
Forming Steel (FS Types A and B)
Deep Drawing Steel (DDS Types A and C)
Extra Deep Drawing Steel (EDDS)
Structural Steel (SS) further designated by Grades (33,37,40,50,80)
High Strength Low Alloy Steel (HSLAS)
Supply condition
Coil / Slits/ Sheet form
We are a leading Manufacturer, Traders and supplier of galvanized steel sheet. Galvanization is the process of applying a protective zinc coating to steel or iron in order to prevent it from rusting. The term is derived from the name of Italian scientist Luigi Galvani. Galvanized iron (GI) sheets are steel sheets which are basically coated with zinc and include a range of hot dip galvanized and electro-galvanized steel sheets. Zinc weathers at a very slow rate, so the coating generally has a long life. Zinc has a greater electro-negativity than iron and hence provides cathodic (or sacrificial) protection to the steel. This results in the zinc corroding in preference to the steel if the coating is chipped or damaged to expose the base metal. Besides acting as galvanic protector, The other functions of the zinc layer are as follow:
To retain the steel intact with its full initial strength.
To provide the surface a more pleasing appearance.
To increase the life of any suitable organic finishing system applied over it.
To protect the steel from corrosive attack in most atmospheres, acting as a continuous and lasting shield between steel and the atmosphere.
Features
Uniform zinc coating in the range of 60-600 GSM
Spangles: Zero / regular / minimized / suppressed
Surface finish: Normal spangle, large spangle, small spangle, matte surface
With and without tension leveling
Passivation: Chromated (Hexavalent / Trivalent)
Oiling: 100-1,000 GSM
Winding: Controlled / staggered (+/- 5 to +/-15mm)
Coil id: 508 / 610 mm
Elongation: 16-33%.
Dimensions
Thickness: 0.18 - 3.2 mm
Width: 800 - 1,500 mm
Length: Up to 2,500 mm
Grades & Standards
CQ, DQ, DDQ, EDDQ, HSLA
ASTM A653, SS33/37/40/50/60/80, EN 10327, JIS
Commercial Steel (CS Types A, B, and C)
Forming Steel (FS Types A and B)
Deep Drawing Steel (DDS Types A and C)
Extra Deep Drawing Steel (EDDS)
Structural Steel (SS) further designated by Grades (33,37,40,50,80)
High Strength Low Alloy Steel (HSLAS)
Supply condition
Coil / Slits/ Sheet form
Parameters:
Thickness: 0.30 4.00 mm
Width: 600- 1500 mm
Length: 1000 7000 mm
Temper: 1/8 Hard, Hard, Hard, Full Hard,
Finish: Dull, Matt, Bright, Mirror
Grade: D, DD, EDD, Super EDD
Edge: Mill edge, Slit edge
CTL: Up to 4500mm with tolerance of +2/-0 mm(Further close tolerance
on - request)
Surface Finish: Super Bright, Bright, Dull & Matte. (RaValuewith controlled Rmax on request).
Grades: Specifications - As per JIS/BIS/ ASTM/EN Standards
Low Carbon CRCA Grades
Super EDD/EDD/DD/D (SPCX, SPCEN, SPCD, SPCC) non-aging, IF-High
Strength steel (IF-HSS), High Strength Low Alloy Steel (HSLA), viz., ST -42,
ST-45, ST-52, SAPH-400/41O, Steel for Porcelein Enammeling, Corrosion
Resistant Steel, viz., Tin Mill Black Plate (TMBP)
Medium & High Carbon CRCA Grades
C- 30, C-40,MC -ll, EN - 8, C-55, MC-12,
EN- 9 C-62, C-60, C-80, HC-14, EN-42J
ELECTRICAL Grades Elec -I, Elec-n, Elec-nI, SemiProcessed Elect. Steel
OTHER CRCA Grades
Case Hardening Steel- 15Cr3, SAE 1010, SAE 1012
Through Hardening Grades- SAE 1040, SAE 1045, 1055, 1065, 1080, 1541
specification
item hot rolled medium and high tensile structural steel â?? is 2062 e250br
thickness 1.6mm-20mm
width 1000mm-2100mm
length 3000mm-18000mm
chemical composition of is 2062 e250br plate
grade c mn s p si carbon equivalent (ce), max
is 2062 e 250 br 0.22 1.50 0.045 0.045 0.40 0.41
mechanical properties of is 2062 e250br plate
grade yield strength n/mm2 tensile strength n/mm2 elongation (%)
is 2062 e250 br 250 min 410 min 23
plates sheets 1 mm to 300 mm thickness cold rolled, hot rolled
Dimensions
Thickness: 0.15-3.2 mm
Width: 900 - 1,500 mm
Length: Up to 2,500 mm
Oiling: 100-1,000 GSM
Winding: Controlled / staggered (+/- 5 to +/-15mm)
Coil id: 508 / 610 mm
Elongation: 16-33%.
Grades & Standards
CQ, DQ, DDQ, EDDQ, HSLA
ASTM A653, SS33/37/40/50/60/80, EN 10327, JIS
Commercial Steel (CS Types A, B, and C)
Forming Steel (FS Types A and B)
Deep Drawing Steel (DDS Types A and C)
Extra Deep Drawing Steel (EDDS)
Structural Steel (SS) â?? further designated by Grades (33,37,40,50,80)
High Strength Low Alloy Steel (HSLAS)
Supply condition
Coil / Slits/ Sheet form
Dimensions
Thickness: 0.4-3.2mm (CRCA); 0.15-1.9mm (CRFH)
Width: 800-1,625mm
Material - Mild Carbon Steel
Length - Can be cut to sheets according to requirement
Max. Weight - 20MT per coil
Grades
Extra Deep Drawing steels (EDD, IF)
IFHS (350, 400, 440)
Bake hardening steel (BH180,220)
HSLA (320, 340, 440)
Semi-processed electrical steels
Steels for enameling
CORTEN
ASTM: A 1008: DS type A & B, DDS, EDDS, EDDS+
IS: IS 513: D, DD, EDD
DIN: DIN 17100: ST 37.3, ST 44.2, ST 44.3, ST 52.3
EN: EN 10268: HSLA 340, HSLA 420,EN 10130: DC 01, 03, 04, 05/06
JIS: G 3141: SPCD, SPCE, SPEN, SPRC 340/ 390,SPFC 340/ 390/ 440
Supply Condition:
Coil / Slit / Sheet form
Surface textures
a. Smooth (plating applications) - suitable for electroplated
articles and also for re-rolling when a matt texture is undesirable. A maximum surface roughness
of 0,5 micrometers centre line average (CLA) is aimed for. Typical applications are car bumpers,
door locks and other electroplated articles.
b. Light matt (drawing and pressing applications)- surface roughness of 0.60 -
1,25 micrometers centre line average (CLA) and 100 peaks per inch (PPI) minimum is aimed for.
Typical applications are automobile panels.
c. Medium matt (drawing and pressing applications)- A surface roughness of 0,8 - 1,6 micrometers centre line average (CLA) and 100 peaks per inch
(PPI) minimum is aimed for. Typical applications are drum bodies and ends.
Dimensions
Thickness: 1.6 -25mm
Width: 900-2,100mm
Material - Mild Carbon Steel
Max. Weight â?? 22 â?? 25 MT
Grades
Drawing quality steel: D / DD / EDD
Cold rolling grades: IF (Interstitial Free) and High Strength IF Steels
Medium carbon / high carbon steels
High strength steels: JIS G 3113 SAPH310/370/400/440, JIS G 3134 SPFH-540/590, EN 10149-2 S550MC/S650MC, DP590
Line pipe â?? API X42 to X-80 grades (Sour and Non Sour Applications)
Boilers and pressure vessels grades
Ship building grades
Corrosion resistant steel
Re-rolling/ Drawing Grades,
Tube and Pipe/ Forming Grades,
Structural/ Medium Tensile Tube/ Forming Grades,
LPG/ Low Pressure Vessel Grades,
HSLA Grades,
Medium Carbon Grades,
Weather Resistance Grades,
Line Pipe Grades,
Chequered Plates
ASTM (USA) : A 36 A572: Gr 42, Gr 50
IS (INDIA) : IS 2062: E250 Gr A/ B/ C, E350 Gr A/ B/ C
DIN (GERMANY) : DIN 17100: ST 37.3, ST 44.2, ST 44.3, ST 52.3
BS (ENGLAND) : BS 4360: 40, 43, 50
EN (EUROPE) : EN 10025: S235, S275, S355
JIS (JAPAN) : G 3106: SM400, SM 490 G 3101: SS400, SS490
Type : Finned
Material : Copper
Thickness : 5-10mm
Application : Industrial
Color ; Brown
Features : Durable, High Strength, Rustproof
Grade : Superior
Inconel 625 Hex Bar, Alloy 625 Bar Inconel 625 Square Bar suppliers in Mumbai, India
Buy Inconel 625 Flat Bar from India, ASTM B446 UNS N06625 Round Bar, Inconel 625 Rod Stock at factory price in India
Buy Inconel 625 Welding Rod at low cost from Inconel 625 Round Bar suppliers in South Africa, UK, Houston, Australia, USA, Singapore, Canada and Indonesia.
Alloy 625 material is a corrosion and oxidation resistant nickel alloy that is used both for its outstanding aqueous corrosion resistance and high strength. Inconel 625 has a Specific Heat of 427 J/kg-C (0 100 C), 0.102 BTU/lb-F (32 212F). Inconel 625 has a Thermal Conductivity of 212F (100C) and an Electrical Resistivity of 128.9 Microhm-cm at 21C (50.8 Microhm-in at 70 F).Its outstanding strength and toughness is because of the niobium addition in it which perform with the molybdenum to stiffen the alloys matrix. Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions.The Melting Range of Inconel 625 is 12901350 C (2350 2460 F).
Inconel alloy 625 products are a type of Nickel based alloy with a high Chromium content (approx. 25wt%) with an addition of Aluminium.Inconel 625 has a Chemical Composition of: Nickel 58.0 min. Chromium 20.0-23.0. Iron 5.0 max. Molybdenum 8.0-10.0. Niobium (plus Tantalum) 3.15-4.15. Carbon 0.10 max. Manganese 0.50 max. Silicon 0.50 max. Phosphorus 0.015 max. Sulfur 0.015 max. Aluminum 0.40 max. Titanium 0.40 max. Cobalt a 1.0 max. Alloy 625 material has a density of 8.44 g/cm3 (0.305 lbs/in3). Alloy 625 is mainly used for high temperature oxidising applications in the heat treatment of metals and materials.The properties of INCONEL alloy 625 make it a material of broad utility in such fields as aerospace, chemical processing, thermal processing, power generation and pollution control. These Inconel 625 material are also used in waste flare gas stacks in petroleum refining.
Heubach international is Inconel 625 Round Bar Suppliers, We are one the dedicated supplier of Inconel 625 Flat Bar, Inconel 625 Hex Bar, Inconel 625 Square Bar at very low price in Mumbai, India. we are since 2004 Alloy 625 Bar suppliers in india in various sizes & threads.We manufacture Inconel 625 round bar, rods, bar, round bar, hex bar, square bar, flat bar, hexagon bar, hexagonal bar, rounds, hot rolled bar, cold rolled bar, cold drawn bar, bright bar, billets, bloom in India.
We maintain stock & supply Alloy 625 Round Bar to more than 60 locations worldwide.in our warehouse you find a large inventory of Inconel 625 Rod including Inconel 625 Welding Rod, Inconel 625 Filler Rod, Inconel 625 Threaded Rod and more than 100 types of UNS N06625 Bar. Offer A wide range of Inconel 625 Rod in all sizes including 3mm*20mm*20mm~12mm*100mm*100mm or as per clientsâ?? requirements
ASTM A335 Pipe (ASME S/A335, Chorme-Moly) is a seamless ferritic Alloy-Steel Pipe for high temperature service. Pipe ordered to this specification shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. Sometimes referred to as â??P Gradeâ??, chome moly pipe is popular in P-Grades P5, P9, P11, P22, and P91. The most common use of grades P11, P22, and P91 is in the power industry and petro-chemical plants, Grades P5 and P9 are commonly used in refineries.
Federal Steel Supply stocks a full range of the following A335 pipe grades
HEUBACH INTERNATIONALis one of the largest exporter, manufacturer and supplier of Alloy Steel Pipe and Tubes in India. These AS pipes and tubes are used in a dissimilar series of industries which comprise Heat-Exchangers, Oil & Gas, Power, Fertilizers, Water Treatment, Paper and Pulp, Pharmaceuticals, Chemicals, Sugar, Food Processing, Dairy, etc. Furthermore, we ensure that our products meet the standings by means of the standards and norms distinct in the industry
Also available high quality Chrome Moly Alloy A213 / SA213 heater tubes with black painting, anti-corrosion oil and galvanised finish.
ASTM A213/ASME SA213 T2, T11, T12, T22, T91, T92 Seamless Steel Tubes Specifications/ Inventory and Size RangeAlloy Steel Tubes/Tubing
End Connections for Line Pipes: Plain, Bevel, Screwed, Threaded
Type: Seamless / ERW / Welded / Fabricated / CDW
Form: Round Pipes/Tubes, Square Pipes/Tubes, Rectangular Pipe/Tubes, Coiled Tubes, "U" Shape, Pan Cake Coils, Hydraulic Tubes
Length: Single Random, Double Random & Required Length, Custom Size - 12 Meter lengths
End: Plain End, Beveled End, Treaded
End Protection: Plastic Caps
Inspection, Test Reports: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports, India Boiler Regulations (IBR) Test Certificate
Details:
Descripstion Grade Size SCH Brand PRICE PER
TON IN USD
ALLOY STEEL TUBE A213 T11, T12, T5, T9, T22, T91 12.7 MM TO 168.3 2MM TO 20MM NSSMC JAPAN, ISMT INDIA, V&M FRANCE 4200 TO 4600
ALLOY STEEL PIPE A335 P5, P9, P11, P12, P22, P91, A691 1/2" TO 24" SMLS & 16" TO 48" ERW 10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS NSSMC JAPAN, ISMT INDIA, V&M FRANCE, TENARIS ITALY 3000 TO 5000
