Our range of copper elbows is fabricated using quality raw material. This range includes copper fittings, including plumbing fitting, air-conditioner pipe connection and brass fitting we also offer plumbing fittings cover three big types, such as endfeed, solder ring, copper press fittings with rubber O-ring and reach 3000 specifications.
We offer copper over bridge that is used in various applications ranging from refrigeration, fluid distribution, air conditioning, heating, and plumbing and air pressure lines. The fitting gets heated up easily and hence consume less energy. Easy to mount and dismantle, these are dimensionally accurate and resistant to corrosion and abrasion with high tensile strength.
We are offering our clients, quality Copper Tee. These are Used for refrigerator, water dispenser, air-conditioner, warm ventilation, central air conditioner controls system, building installation. Our range of products is check by the quality experts on required quality parameters so that they comply with international quality standards.
The ranges of our copper header offered by us are manufactured using advanced process technologies to meet the specific process demands including spinning swaging, compressing and crimping. Further the use of modern machines also enables us to offer this copper header in minimum tolerance ranges
These products are the piping equipment that can be welded to change the direction of two pipes to enable the flow of fluids in the piping system. These are in great demand due to its most appreciated features, availability of various options based on different specifications and most importantly customization of these products.
We bring forth a comprehensive range of high standard copper flanges that are catering to the demands of different industries. These flanges have gained high appreciation for their dimensionally accurate and corrosion resistant features. Fabricated from industry grade materials, all these flanges are ideal for high temperature & pressure applications.
Nickel alloy Buttweld Fittings ASTM/ ASME sb 336 uns 2200 ( nickel 200 ) , uns 2201 (nickel 201 ) , uns 4400 (monel 400 ) , uns 8020 ( alloy 20 / 20 cb 3 ) , uns 8825 inconel (825) , uns 6600 (inconel 600 ) , uns 6601 ( inconel 601 ) , uns 6625 (inconel 625) , uns 10276 ( hastelloy c 276 ) Copper Alloy ASTM / ASME sb 111 uns no. c 10100 , c 10200 , c 10300 , c 10800 , c 12000, c 12200, c 70600 , c 71500 . ASTM / ASME sb 466 uns no. c 70600 (cu -ni- 90/10), c 71500 (cu -ni- 70/30)
Manufactured using high grade raw material, these are available in different sizes and shapes. Our pipes have been widely appreciated for their sturdy construction and durability. Range 15 nb up to 1200 nb in sch 5s , 10s ,10, 20 , 40s , 40 , std , 60 , 80s , 80 , xs , 100 , 120 , 140 , 160 & xxs form seamless / erw / welded in round & square . Nickel Alloy ASTM / ASME sb 163 uns 2200 ( nickel 200 ) ASTM / ASME sb 163 uns 2201 (nickel 201 ), ASTM / ASME sb 163 / 165 uns 4400 (monel 400 ) ASTM / ASME sb 464 uns 8020 ( alloy 20 / 20 cb 3 ), ASTM / ASME sb 704/705 uns 8825 inconel (825) ASTM / ASME sb 167 / 517 uns 6600 (inconel 600 ) ASTM / ASME sb 167 uns 6601 ( inconel 601 ), ASTM / ASME sb 704 /705 uns 6625 (inconel 625) ASTM / ASME sb 619/622/626 uns 10276 ( hastelloy c 276 ) Copper Alloy ASTM / ASME sb 111 uns no. c 10100 , 10200 , 10300 , 10800 , 12000,12200, 70600 , 71500 . ASTM / ASME sb 466 uns no. c 70600 (cu -ni- 90/10), c 71500 (cu -ni- 70/30)
We are offering our clients, quality copper union that is appreciated for international quality standards. These are manufactured using quality copper and are in line with the latest market trends. Moreover, these are used in diverse industrial applications requiring joining of two heavy-duty metal parts or components.
Commodity: ELECTROLYTIC COPPER CATHODES Origin: DRC Purity: >= Cu: 99.99% Port of Loading: Dar es salaam, Tanzania.
We can supply copper Cathode plates
Brass and copper pipes and tubes and other products made from that.
Looking to procure copper millbery scrap 99.99% and copper cathode 99.99%. Both will be in bulk qty. we would invite any european genuine suppliers to quote. -
Copper Bus Bars are offered in forged /hot moved and additionally chilly worked conditions in required dimensional wrap up. These copper Bus bars are accessible in Hard, Half-Hard and additionally in Soft conditions and are ideal for use in electrical applications. The nearness of electroplated tin plating additionally helps in enhancing joining surface viability and additionally in lessening the electrical resistance of joints.
Copper tubes come in various grades, each with specific properties suited to different applications. The most common grades of copper tubes include: ASTM B88 (Type K, L, M): Type K: This grade of copper tube has thick walls and is typically used for underground water services and distribution. Type L: Type L copper tubes have medium thickness walls and are commonly used for residential water supply lines, refrigerant lines, and heating systems. Type M: Type M copper tubes have thin walls and are suitable for general residential and commercial plumbing applications where pressures are relatively low. ASTM B280: ASTM B280 copper tubes are seamless, drawn-copper tubes used for refrigeration and air conditioning systems, as well as in heating applications. These tubes are available in various tempers, such as annealed (soft) and drawn (hard), to suit different installation requirements. ASTM B75 (Type K, L): Type K: Similar to ASTM B88 Type K, these tubes have thick walls and are commonly used for underground water services and distribution. Type L: Similar to ASTM B88 Type L, Type L tubes have medium thickness walls and are suitable for residential water supply lines and refrigerant lines. ASTM B88 (Type ACR): ACR (Air Conditioning and Refrigeration) copper tubes are specially designed for use in air conditioning and refrigeration systems. These tubes are typically annealed for ease of bending and are available in various sizes to accommodate different system requirements. ASTM B819: ASTM B819 copper tubes are seamless copper tubes specifically designed for medical gas systems. These tubes are cleaned and capped to meet stringent purity requirements for medical gas applications. Copper-Nickel Alloys: Copper-nickel tubes, such as CuNi 90/10 (90% copper, 10% nickel) and CuNi 70/30 (70% copper, 30% nickel), offer excellent corrosion resistance and are commonly used in marine and offshore applications, as well as in heat exchangers and condensers in aggressive environments. These are some of the commonly used grades of copper tubes. The selection of the appropriate grade depends on factors such as application requirements, operating conditions, and regulatory standards. It's important to consult with suppliers or engineers to choose the right grade for your specific application needs.
Copper - aluminum drawn tubes in straight length and also down stream components made from press.Both tubes and machined parts
Copper pipes, tubes and coils are used for heat exchangers, heaters, air conditioning, refrigerators, plumbing, medical gas pipeline, solar and many more.
Cupro Nickel Rods 95/5, 90/10 & 70/30
Rods They are manufactured from Structural Quality High Tensile Steel Grade 43A to BS 4360. These rods are molecularly bonded with pure EC Grade Copper (99.9%). Dimensions Rod Size (Dia x Length) Actual Rod Dia "S" Thread Dia "T" Cat No. 9.5 x 1200 (Un-Threaded) 9.5 - HBR-012 9.5 x 1800 (Un-Threaded) 9.5 - HBR-018 14 x 1200 12 14 HBR-1412 14 x 1500 12 14 HBR-1415 14 x 1800 12 14 HBR-1418 14 x 2000 12 14 HBR-1420 14 x 2400 12 14 HBR-1424 5/8 x 4'' OR 16mm x 1200 14.2 5/8" HBR-112 5/8 x 5'' OR 16mm x 1500 14.2 5/8" HBR-115 5/8 x 6'' OR 16mm x 1800 14.2 5/8" HBR-118 5/8 x 8'' OR 16mm x 2400 14.2 5/8" HBR-124 5/8 x 10'' OR 16mm x 3000 14.2 5/8" HBR-130 5/8 x 4'' OR 16mm x 1200 14.2 5/8" HBR-312 5/8 x 5'' OR 16mm x 1500 16 5/8" HBR-315 5/8 x 6'' OR 16mm x 1800 16 5/8" HBR-318 3/4 x 4'' OR 19mm x 1200 17.2 5/8" HBR-212 3/4 x 5'' OR 19mm x 1500 17.2 3/4" HBR-215 3/4 x 6'' OR 19mm x 1800 17.2 3/4" HBR-218 3/4 x 8'' OR 19mm x 2400 17.2 3/4" HBR-224 3/4 x 10'' OR 19mm x 3000 17.2 3/4" HBR-230
Copper Tubes (Air Conditioning Systems And Refrigeration Systems) The Copper tubes that we manufacture are extensively used in Air conditioning systems. The use of copper tube in air-conditioning and refrigeration systems has grown steadily in recent years. This is in large measure due to the inherent properties of the copper metals and their unique abilities to meet the needs of the ACR industry. Stringent new requirements, including demands for increased operating efficiency and the reduction or elimination of harmful emissions, have led to a new appreciation for copper tube''s role in product enhancement.
