We excel in all types of powder coatings for aluminium
Steel turnings: Machine shop turnings are clean steel or wrought iron turnings, free of iron borings, nonferrous metals in a free state, scale, or excessive oil. HSS drill bits are made from carbon steel with the addition of other elements such as chrome and vanadium, allowing them to be used at high drilling speeds. HSS bits can be used to drill iron, steel and other metals such as brass, copper and aluminum alloy. They can also be used to drill plastic. HSS chip and inserts HSS Grades: M2 scrap, M1 scrap, M7 scrap, M42 scrap, T-15 scrap, D2 tool steel scrap
Steel turnings: Machine shop turnings are clean steel or wrought iron turnings, free of iron borings, nonferrous metals in a free state, scale, or excessive oil. HSS drill bits are made from carbon steel with the addition of other elements such as chrome and vanadium, allowing them to be used at high drilling speeds. HSS bits can be used to drill iron, steel and other metals such as brass, copper and aluminum alloy. They can also be used to drill plastic. HSS chip and inserts HSS Grades: M2 scrap, M1 scrap, M7 scrap, M42 scrap, T-15 scrap, D2 tool steel scrap
Old thin steel scrap predominantly less than 6 mm thick in sizes not exceeding 1.5 x 0.5 x 0.5 m, prepared in a manner to ensure direct charging. If greater density is required, it is recommended that maximum 1 meter is specified.
Shall consist of clean sound Muntz metal tubing which may be plated or unplated, free of nickel alloy, aluminum alloy, and corroded material. Shall have a copper content of not less than 55%, a lead content of not more than 1%, and shall be free of aluminum bronze and silicon bronze.
Barbed wire size: 1.8 mm wire diameter515 m length 16.4 kg/roll. Barbed wire size: 1.8 mm wire diameter845 m length 27 kg/roll. ... Double strand traditional twist barbed wire. Line wire diameter: 2.5 mm. Barb wire diameter: 1.6 m. Barb spacing: 15 cm. Zinc coating: 60 g/m2. Length: 270 m. Weight: 25 kg.
UPERIOR FLUX NUMBER No. 601-Powder DESCRIPTION Silver brazing powder flux REC. BASE METALS Ferrous, stainless steels, copper and carbides REC. FILLER METALS BAg, BCuP REC. TEMP RANGES 450-850 C / 900-1600 F SPECS. AMS 3410; AWS A5.31-91, Type FB3F; O-F 499, Type B SDS Link
Sizing of Telecommunication Bonding Backbone (TBB) TBB length FT Grounding Conductor Size (AWG) DC Resistance Per 100 Ft (Copper Conductor) ShortTime Rating (A) 8 0.0778 391 < 13 Ft 6 0.0491 621 14 - 20 Ft 4 0.0308 988 21 -26 Ft 3 0.0245 1245 27 - 33 Ft 2 0.194 1571 34 - 41 Ft 1 0.0154 1981 42 - 52 Ft 1/O 0.0122 2499 53 - 66 Ft 2/O 0.00967 3150 > 66 FT 3/O 0.00766 3972 4/O 0.00608 5008 Kcmil 250 0.00515 5917 300 0.00429 7101 350 0.00367 8284
Wire Material FeCrAl Alloy Color Golden / Silver Appplication Industrial Furnace / Muffel furnace / Ovens Wire Gauge 6 swg to 19 swg Temperature Withstand Upto 1300 Deg C
Manganin is a trademarked name for an alloy of typically 84% copper, 12% manganese, and 4% nickel. Manganin foil and wire is used in the manufacture of resistors, particularly ammeter shunts, because of its virtually zero temperature coefficient of resistance value and long term stability.
Thickness : 0.010-0.099mm Width : 3-300mm *Depends on grade and thickness. Contact us for more details.
metal powders suitable for AM are the spherical geometry of the particles resulting from the gas atomisation and a particle size distribution according to the layer thickness, usually between 10-50 µm.
Tubing shall be in the fully heat treated condition as received from the mill. Heat treatment may ne annealed, normalized, or normalized and tempered per the ASTM Specification used. 2) Welded tubing conforming to ASTM A 214 or A 226 is an acceptable alternate to seamless tubing, subject to prior approval from OWNER.
Tensile Strength: 480 N/mm2. Elongation: 33% (Note: 5.5 mm wire rod before wire drawling). Elongation: 5-6% (Note: Diameter 3.3 mm wire rod drawling). Chemical: Carbon: 0.09% Si: 0.17% Mn: 0.57% P: 0.024% S: 0.02%.
Bonding jumpers shall consist of 100 mm (4 inches) wide copper strip or two 6 mm² (10 AWG) copper conductors spaced minimum 100 mm (4 inches) apart. Use 16 mm² (6 AWG) copper where exposed and subject to damage. B. Comply with the following when shielded cable is used for data circuits.
Concertina razor wire with 0.5 mm thickness coating. Core wire diameter: 2.5 mm. ... Blade length: 22 mm. Blade width: 12 mm. Blade spacing: 35 mm.
Round Annealed Binding Wire Dimension: 5.50mm Diameter. Quality: SAE 1008 LS16 Annealed, lightly oiled. Tensile Strength: 250-430 N/mm2. Elongation: 40 % @ measuring length of 5.0 x dia. External Diameter of Coil: 800-900 mm. Internal Diameter of Coil: 550 mm. Height of Coil: 600 mm. Delivery Form: Coil.
Metal cored wires are classified under the American Welding Society specification with solid MIG wires (AWS A 5.18-93 for mild steel, AWS A5. 28-98 for low alloy and AWS A5. 9-93 for stainless steel).
Standard Number Last version Description Status A 19 1936 Quenched-and-Tempered Carbon-Steel Axles, Shafts, and Other Forgings for Locomotives and Cars Replaced by A 236 /no materials/ A 63 Alloy Steel Forgings for Locomotives and Cars Replaced by A 237 /no materials/ A 105/A 105M 2005 Carbon Steel Forgings for Piping Applications /1/ A 133 Alloy-Steel Forgings for Locomotives and Cars Withdrawn 1941 /no materials/ A 136 Forge-Welded Steel Pipe Withdrawn 1945 /no materials/ A 181/A 181M 2006 Carbon Steel Forgings, for General-Purpose Piping /2/
Jhas 0.8 Mm - 1.2 Mm Sealing Wire Galvanized Steel for Lead Seal. ... 50-100 M Sealing Wire, For Industrial. ... Packing Wire. ... 0.5-5 Mm Golden Sealing Wire, For Industrial, Thickness: 5-20 Mm. ... Jamesmaag 1.26 Mm Sealing Wire. ... Silver 1 Mm Packing Wire. ... NBI Lead Seal. ... Smartpack 15 Mm Sealing Wire, For Construction, Thickness: 1 Mm.
