Cotton waste, banian waste, lubricating oils, greases industrial oil and greases.
Lubricant Oil..
Adhesives And Sealants..
Lube Oil Or Lubricant..
Mix hydrocarbon oil.
Industrial fuels, lubricants and oil.
Scrap, oil .
Adhesive Sealant..
Mix hydrocarbon oil 10ppm to 50ppm diesel.
Oil and lubricants .Manufacturer
Rubber processing oil.
Lubricant and machinery parts.
Lubrication Equipment And Hand Tools..
Used engine oil, used motor oil.
Aerosol lubricant and industrial spray.Manufacturer
Base oil recycled virgin lubricant sn500.
Shellac compound spirit based.
Lubricant and machinery parts.
We are the leading exporter, supplier and manufacturer of Diesel Engine Cooling Liquid. Based in Mumbai, Maharashtra our treatment has especially been designed to overcome the undesirable characteristics that are usually found when using chromate or soluble oil corrosion inhibitors. The treated re-circulating water of cooling liquid is usually colorless. The leakage at the packing glands produces zero crystalline deposits or unsightly stains. Youâ??ll also not experience any foam or carbonization at points of high transfer. It is an effective corrosion inhibitor that is non-chromate and non-abrasive. It is not a soluble oil and is pH buffered. Compatible with antifreeze it protects the Ferrous and copper bearing metals by Minimizing metal oxide deposits. Info : Prevents acid attack Applicable where water is the heat source for the evaporator/distiller Reduces disposal and toxicity problems Safer to handle Does not damage seals, hoses packing No foam or carbonized deposits Not sensitive o overdosing Easily tested and controlled Dose not form fouling deposits when mixed with ethylene glycol Application and Use The recommend treatment level of PARAFIX-DEWT diesel engine cooling water treatment is 3000-4500ppm. This represents an initial dosage of 3.2 KG per ton of circulating water. Subsequent dosages are dependent upon the concentration found in the re-circulating water. Diesel engine cooling water treatment is an effective corrosion inhibitor for all the normal ferrous and copper bearing metals in a circulating water system. There are no deleterious effects on glands; etc. It is compatible with antifreeze materials will not form objectionable sludge's. Efficient heat transfer is assured since corrosion is held to ammonium and surfaces are maintained free of deposits. Diesel engine cooling water treatment is recommended for systems with good quality distilled water makeup.
Powergear SP ISO VG 100/ 150/ 220/ 320/ 460/ 680 range of oils have been developed to meet the widest range of requirements of EP (Extreme Pressure) lubrication such as industrial� gear oils operating under� severe duty. The oils are formulated from minerals base stocks and additives such as sulphur and phosphorus compounds to satisfy the widest range of operational requirements. APPLICATION Powergear SP Oils are recommended for lubrication of all types of industrial gears especially where operating conditions involve heavy loads, high pressure, high speed and high relative sliding velocities at elevated ambient and operating temperatures. Benefits Thermal and oxidation stability permitting continuous use at operating temperatures as high as 100 C. Grand demulsibility for rapid water separation. Excellent corrosion protection. Good anti-wear and EP properties. Long operating life.
