Coolant is used widely for cooling the engine. It is having good thermal absorption capability 210lts to 1lts
Low viscosity furnace oils.
High performance transformer oil as per is 335. 210 lts 20 lts 1 lts
SAE 10, 30, 40, 20W 40. 210 lts, 20l, 1l
Sizing softener Rsl-21 Application Sizing lubricant / wax for sizing of cotton and its blends. Chemistry for performance Gives excellent surface smoothness and softness Acts as a flexibilizer for starch. Reduces the brittleness of the film Reduces hairiness of the yarn Retains better adhesion and abrasion resistance of the size film than the Conventional softener The polymeric nature imparts better film properties to the sized yarn Increased efficiency on loom Unique hydrophilic sizing lubricant, quick moisture absorption Easy desizing than conventional softener due to special composition Low foaming Biodegradable Gives lesser load on effluent due to very low dose level Chemistry for economics Lower economical dosage Physical properties Form/colour/ph of solution/solid content Solubility/pack size: Liquid/whitish/5.5 û 6.5/20 ¦ 1 %/ Dispersible in water/35 kg 35 kg.Carbouys
RPO is being used by rubber industries and dhoop bati industries and grease industries. It is green in color, density approx..97 . 0ne drum weight is of kg.230.
Confirms to ASTM & BIS Standards 210 Ltrs, 50 Ltrs, 20 Ltrs, 5 Ltrs
Confirms to ASTM & BIS spec's 210ltrs,50 ltrs,20 ltrs& 5 ltrs
Confirms to ASTM & BIS spec's 210 ltrs, 50 ltrs, 20 ltrs, 5 ltrs
Lubricants
XG - 325 High temperature chain lubricant Description: XG-325 is a synthetic lubricant specially formulated for high temperature lubrication requirements of conveyors. It¦s solid lubricants dispersed in synthetic carrier, give excellent lubrication to conveyors passing through heated ovens XG-325 is a stable lubricant. Its penetrating carrier fluid readily carries solid lubricants into inaccessible areas. Its carrier fluid evaporates above 180 C and leaves solid film for efficient lubrication. There is no risk of carbon or gum build up Typical hysico-chemical properties Appearance : Black Base : Synthetic fluid with solid lubricants Specific gravity : 0.98 Viscosity @ 40 C : 150 cst. Flash Point : 250 C Pour point : (-) 30 C Shelf Life : 2 years Application Areas : XG-325 is recommended for lubrication of moderately loaded chains, conveyors, bearings operating at high temperature e.g. ovens. It is an excellent high temperature Chain Lubricant to eliminate erratic operations of conveyors used to carry air conditioning compressors through a 325 F oven Direction for use : Stir well before use. Apply by brush Packing : 1 Kg., 5 Kg., & 25 Kg. containers. Sprayable aerosol packing can be provided on demand 1 Kg., 5 Kg., & 25 Kg. containers Sprayable aerosol packing can be provided on demand
Transformer oil Conforming to IS specifications and International specs 12 KL tankers and 209 liters in drum
Extrusion lubricant used at high temperatures and pressures. It is a mixture of finest grade graphite powder in special oil with additives. Colloidal Graphite is an import substitute. 50kg & 200kg
POLYSIL 20 Silicone Mould Release Spray Description : Polysil 20 is an excellent mould release agent cum multipurpose lubricant with silicone & purified ozone friendly propellant. Polysil 20 is an odourless, non-toxic user & environment friendly product free from hazardous solvents. It has excellent surface coverage. Polysil 20 is chemically inert and has very good temperature stability from (-) 40ªC to (+) 250ªC. It does not carbonize, melt or freeze. Its film having high tackiness resists breakdown under mechanical shear & heavy loads. Polysil 20 is an mould release agent for plastic moulding industries to : * Minimise rejects * Reduces markings * Reduces spotting * Prevents sticking * Gives corrosion protection * Gives lubrication Application : Polysil 20 finds wide applications in following areas : Mould release agent for plastics, Polyesters, Nylon, Rubber & Melamine etc. Lubricant for conveyor belts, slide plates, tables, guideways etc. Cleaning heaters of yarn manufacturing, texturizing and molding machinery. Lubrication of high temperature motors & other precision equipments. Non-spotting general-purpose lubricant for electrical & electronic equipments, food processing machinery, Pharmaceutical plants etc. Direction for use : Hold the can upright and spray from distance of 15v20 cms. Usually one pass is sufficient. Packing available : 500 ml. aerosol pack. 500 ml. aerosol pack.
Rubber Process Oil IPOL RO 701 End Application : Tyres, Retread rubbers,Moulded and ExtrudedProducts, Calendered products,Rubber mats, Rubber Flooring, Rubber sheets. Cateogary with Polymers : NR, SBR, PBR, AND RECLAIM Packing : 208 kgs in Re-conditioned Drum
Product Name : IPOL MP grease 2/3 End Application : Premium quality lithium based grease, especially formulated for use in a wide range of general & heavy duty applications in industries Packing : 182 kgs in NMS Drum
SKUs Available 4 Litre , 1 Litre SPECIFICATIONS API SN / A3 / B4, F-SYN Description: Highest Quality Fully Synthetic lubricant oil compatible with all cars equipped with Exhaust gas treatment systems such as DPF and FAP partcile filters. Contributes in preserving the environment, by minimizing harmful particle emissions. Specifications: Meets Specification of: API SN / A3 / B4, F-SYN Applications: Appropriate for the most technologically developed engines. Recommended for all cars requiring 5W40 specifications .
SKUs Available: 210 Litre , 3.5 Litre , 3 Litre SPECIFICATIONS: API SN / GF-5 Description Synthetic Lubricant with exclusive additive technology formulation, designed to offer the best protection for the engine, without compromising on efficiency. Specification: Meets Specification of: API SN / GF-5 Applications: Recommended for all cars, requiring 5W30 specifications. Highly recommended for petrol cars requiring fuel economy under normal driving conditions.
SKUs Available 1Litre SPECIFICATIONS: API SN / F-SYN Description: Fully Synthetic engine oil with latest generation components for 4T motorcycles. Specifications: Meets Specification of : API SN JASO T 903:2016 MA2 Applications: Fully Synthetic engine oil for new generation bikes requiring 10W50 specifications. Especially recommended for super bikes with high-end capacity.
SKUs Available 210Litre , 50Litre , 3.5Litre , 3Litre Description: MGM Eco Supreme 20W-50 API SM / CF is a high quality multi-grade car engine oil specially formulated to meet the API SM / CF specifications and designed to provide superior protection under extreme conditions. Specifications: Meets / Exceeds specification levels of API SM / CF. ACEA A2B2. Suitable for Cars running on Petrol, Diesel & CNG. Recommended for use in all cars of Maruti Suzuki, Hyundai, Mahindra, TATA, Toyota, Ford, Fiat etc. Product Benefits: Excellent Engine Cleanliness & Wear Control. Superior Oxidation Stability. Fuel Efficient Long Drain Engine Oil.
