Iron Ore Fines are defined as iron ore dust with the majority of individual particles measuring less than 4.75 millimeters (3/16 inch) diameter. We offer high quality Iron Ore fines in different grades according to the requirements of our clients.
We offer our client Iron Ore Lumps which is available in various textures, sizes, flamed and finishes. It can be personalized as per the requirement of our customers. The complete batch of ores are tested on variety of parameters to ensure that they comply with client's specifications.
Iron ore pellets are indurated, spheres of ore with a high iron content and uniform quality. Pellet plants can produce two varieties of pellets: blast furnace pellets and direct reduction pellets (DR pellets). Blast furnace pellets are used in the coke-based blast furnace process, which is the most common method of producing hot metal (molten iron for steelmaking). Blast furnace pellets are delivered mainly to steel mills. DR pellets are used in the direct reduction processes to produce sponge iron, which is an alternative process route, as an initial stage from iron to steel. The DR process is primarily based on the use of natural gas and has become increasingly common in countries with access to inexpensive natural gas.
Iron Ore Fines from India.
Fe : 56-58%
200,000MT Ready Stock Available at Vizag Port India.
Monthly supply Capacity: 200,000MT to 500,000MT
Payment Term: TT or LC Irrevocable & Transferable from 1st 50 Prime Global Bank.
Technical Specification
Chemical
analysis
% by
weight
FeO 42 - 45
SiO2 33 - 42
Al2O3 2 - 5
CaO 2 - 5
MgO 0.5 - 1.5
Zn- 0.8 - 1.5
S- 0.5 - 0.7
Cu- 0.5 - 0.8
Mn--0.4 - 0.6
Cr-- 0.2 - 0.4
Colour: Black/grey
Hardness: HV0.2 610 (6 Moh)
Particle Density: 3.45-3.65 mt/m3 (215-225 lbs/cu-ft)
Bulk Density: 1.6-1.8 mt/m3 (100-112 lbs/cu-ft)
Particle shape: Angular
System of Conformity
Iron Sand: SS-EN 13242 + A1:2007 System 2+
REACH: 01-2119513228-45-0005
EC # 266-968-3
CAS # 67711-92-6
Grain size distribution*
Passed amount, weight %
Sieve(mm) Upper
* according to SS-EN 933-1
The chemical and physical data in this technical data sheet are expected average figures. Oxides are not indications of the phases present, but only conventional representations of elements.
This is product exporting in worldwide this the origin Russia ,Turkey we are providing best quality
Price of product ( USD price or FOB price) : contact
Product origin : Russia ,Turkey
Key Specifications/Special Features :
Different product grades with different performances can be available. Supply the most suitable grade according to customer requests
Iron Ore
We are Traders for iron ore from Mexico/Peru/Chile/Iran/India. etc
We have all grades of iron ore available
54%Fe To 68%fe
Forms: Lumps/Fines/Slag/Sponge
We are in a position to supply low grade Iron Ore Fines and Lumps (ranging between fe content of 48-58%) in bulk from India. Minimum shipment size 50,000 MT. Full Quality Analysis Report shall be furnished on request.
We are in a position to supply low grade Iron Ore Fines and Lumps (ranging between fe content of 48-58%) in bulk from India. Minimum shipment size 50,000 MT. Full Quality Analysis Report shall be furnished on request.
Commodity -iron ore grade fe 57% rejection below fe 56%
Origin - goa
Description- 57% fe grade iron ore rejection below 56% fe
Chemical composition (on dry basis)
A. Fe 57% rejection below 56%fe
B. S1o2- 7% max
C. A12o3- 4% max
D. P:0.07%
E. S:0.07%
F. Moisture - 9%
Physical composition (size)
- 10 mm : 100% max
+ 10 mm : 35% min
- 0.15 mm : 35% max
Size Range 015 mm to 63 mm
Moisture Content Typically 8 12
Bulk Density 20 to 25 tonnesm
Angle of Repose 35 to 40
Specific Gravity 45 to 50
Porosity 35 to 40
Surface Area High Due to fine granularity
Color Reddishbrown
Abrasion Index Low Depends on mineral content
Flowability Poor due to fine size
