Product : Bronze Sleeve Packed Water Level Gauge
Type of Pattern : Standard Pattern
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : With automatic shut off device in water
Arm : Right Hand Type / Left Hand Type
End Details : Screwed male BSP Parallel threads to BS 21.
Testing & Certification
Hydraulic Test Pressure : 500 Psig.Hyd.
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm )
Maximum Working Temperature : 435F (225 C)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Fusible Plug
Type of Pattern : One piece design
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
End Details : Screwed male BSP Parallel threads to BS 21.
Note : Melting temperature of Fusible Alloy 270 C
Testing & Certification
Hydraulic Test Pressure : 500 Psig.Hyd.
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm)
Maximum Working Temperature : 435 F (225 C)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Sight Glass
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : With toughened glass single window upto & including 25mm size & double window for size above 25mm
End Details : Screwed male BSP Taper threads to BS 21.
Testing & Certification
Hydraulic Test Pressure : 500 Psig.Hyd.
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm)
Maximum Working Temperature : 435 F (225 C)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
Product : Bronze Parallel Slide Blow off Valve
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Rack & Pinion Operated with Key
Type of Seat : Renewable seat
Type of Disc : Renewable disc
Trim : SS AISI410 / Monel
Gland Packing : Graphited Asbestos
End Details : Flanges as per BS 10 Table H F.F. undrilled
Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Seat Test Pressure : 500 Psig.Hyd.
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm)
Maximum Working Temperature : 435 F (225 C)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Pressure Reducing Valve
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Spring Loaded outlet pressure range available 5/60, 20/80, 40/125 Psig
Type of Seat : Integral
Type of Disc : Renewable disc
Trim : SS AISI304 Diaphragm
End Details : Screwed female BSP Taper threads to BS 21.
Testing & Certification
Hydraulic Test Pressure : 500 Psig.Hyd.
Working Pressure : Max. Inlet 250 Psig.(17.58Kg/cm)
Maximum Working Temperature : 435 F (225 C)
Performance Test is carried out on live steam on all valves.
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
3386 Industrial Valves Gauges Suppliers
Short on time? Let Industrial Valves Gauges sellers contact you.
Product :Bronze Pressure Reducing Valve
Body Material cum Standard : Gun Metal (IS:318 Gr.LTB2)
Description : Spring Loaded outlet pressure range available 5/60, 20/80, 40/125 Psig
Type of Seat : Integral
Type of Disc : Renewable disc
Trim : Rubber Diaphragm
End Details : Screwed female BSP Parallel threads to BS 21.
Testing & Certification
Hydraulic Test Pressure : 500 Psig.Hyd.
Working Pressure : Max. Inlet 250 Psig. & Service Temp 50 C (Suitable for Water & Air)
Performance Test is carried out on compressed air line on all valves
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Accessible Feed Check Valve
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Right Angle Body Straight Inlet / Curved Inlet
Type of Seat : Renewable seat
Type of Disc : Renewable disc
Trim : SS AISI410 / Monel
Gland Packing : Expanded Pure Flexible Graphite
End Details : Flanges as per BS 10 Table H F.F. undrilled
Testing & Certification
Hydraulic Test Pressure : 500 Psig.Hyd.
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm )
Maximum Working Temperature : 435 F (225 C)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Inspectors Test Gauge Valve with bend
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : M 20 x 1.5 Pitch threads for Gauge connections
End Details : Screwed female BSP Parallel threads to BS 21.
Testing & Certification
Hydraulic Test Pressure : 500 Psig.Hyd.
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm )
Maximum Working Temperature : 435 F (225 C)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Thermodynamic Steam Trap
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Thermodynamic type with inbuilt strainer
Trim : SS AISI410
End Details : Screwed female BSP Taper threads to BS 21.
Testing & Certification
Hydraulic Test Pressure : 500 Psig.Hyd.
Steam Test Pressure : 250 Psig.Hyd.
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm )
Maximum Working Temperature : 435 F (225 C)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Relief Valve
Type of Pattern : Straight Type
Body Material cum Standard : GM ( IS:318 Gr.LTB2 )
Description : Spring Loaded Open Discharge
Type of Seat : Integral seat
Type of Disc : Renewable disc
Trim : Cu-Alloy
End Details : Screwed male BSP Parallel threads to BS 21.
Testing & Certification
Hydraulic Test Pressure : 300 Psig.Hyd.
Note : Please advise set pressure while placing order
Working Pressure : Max.150 Psig.
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product :Bronze Relief Valve
Type of Pattern : Right AngleType
Body Material cum Standard : GM ( IS:318 Gr.LTB2 )
Description : Spring Loaded Enclosed Discharge
Type of Seat : Integral seat
Type of Disc : Renewable disc
Trim : Cu-Alloy
End Details : Inlet end male BSP Parallel threads outlet female BSP Parallel threads to BS 21.
Testing & Certification
Hydraulic Test Pressure : 300 Psig.Hyd.
Note : Please advise set pressure while placing order
Working Pressure : Max.150 Psig.
Our Work's Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product :Bronze Pilot Operated R Type Pressure Reducing Valve
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Pilot operated R-type outlet pressure range available 5/60, 20/80, 40/125 Psig.
Type of Seat : Renewable seat
Type of Disc : Renewable disc
Trim : SS AISI410 / Monel
End Details : Flanges as per BS 10 Table H F.F. undrilled
Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Note : Please advise outlet pressure while placing order
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm )
Maximum Working Temperature : 435 F (225 C)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Safety Valve
Type of Pattern : Right Angle
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Spring Loaded Enclosed Discharge
Type of Seat : Integral seat
Type of Disc : Renewable disc
Trim : Cu-Alloy
End Details : Inlet end male BSP Taper threads outlet female BSP threads to BS 21.
Testing & Certification
Body Test Pressure : 300 Psig.Hyd.
Note : Please advise set pressure while placing order
Working Pressure : Max.BOP 150 Psig.(10.54Kg/cm )
Maximum Working Temperature : 435 F (225 C)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product :Bronze Safety Valve
Type of Pattern : Straight Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Spring Loaded Open Discharge
Type of Seat : Integral seat
Type of Disc : Renewable disc
Trim : Cu-Alloy
End Details : Inlet threads male BSP Taper to BS-21
Testing & Certification
Body Test Pressure : 300 Psig.Hyd.
Note : Please advise set pressure while placing order
Working Pressure : Max.BOP 150 Psig.(10.54Kg/cm )
Maximum Working Temperature : 435 F (225 C)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product :Bronze Mobrey Valve
Type of Pattern : Right Angle
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Screwed in bonnet inside screw rising stem
Type of Seat : Renewable seat
Type of Disc : Renewable disc
Trim : SS AISI-410
Gland Packing : Expanded Pure Flexible Graphite
End Details : Flanges as per BS 10 Table H F.F. undrilled
Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm )
Maximum Working Temperature : 435 F (225 C)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Loco Type Fusible Plug
Body Material cum standard : Bronze IBR Clause 282 (a) IV GrB
Product Description : Loco Type two piece design
End Details : Male BSP Taper Threads to BS-21
Testing & Certification
Test Pressure : Tested to 500Psig. Hyd. (35.15 kg/cm (Hyd.)
Working Pressure : Max. BOP 250Psig.(17.58kg/cm )
Maximum Working Temperature : 435 F (225 C)
(APS Marines & Logistics)
Product : Cast Iron Globe Valve
Product Standard : BS:5152 / DIN 86251
Type of Pattern : Straight Pattern
Pressure / Class / Rating : PN 16
Body Material cum Standard : Cast Iron IBR 86 to 93 Gr.A
Description : Bolted Bonnet, Outside Screw & Yoke Type Rising Stem
Type of Seat : Renewable seat
Type of Disc : Renewable disc
Trim : SS AISI-410
Gland Packing : Expanded Pure Flexible Graphite
End Details : Flanges as per DIN 2533 RF (PN 16) Undrilled
Testing & Certification
Rating : PN 16
Body Test Pressure : 26Kg/cm g (Hyd.)
Seat Test Pressure : 16Kg/cm g (Hyd.)
Backseat Pressure : 16Kg/cm g (Hyd.)
Working Pressure : Max BOP 13Kg/cm g at 220 C Steam
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Cast Iron Junction Steam Stop Valve
Product Standard : BS:5152 / DIN 86251
Type of Pattern : Right Angle Pattern
Pressure / Class / Rating : PN 16
Body Material cum Standard : Cast Iron IBR 86 to 93 Gr.A
Description : Bolted Bonnet, Outside Screw & Yoke Type Rising Stem
Type of Seat : Renewable seat
Type of Disc : Renewable disc
Trim : SS AISI-410
Gland Packing : Expanded Pure Flexible Graphite
End Details : Flanges as per DIN 2533 RF (PN 16) Undrilled
Testing & Certification
Rating : PN 16
Body Test Pressure : 26Kg/cm g (Hyd.)
Seat Test Pressure : 16Kg/cm g (Hyd.)
Backseat Pressure : 16Kg/cm g (Hyd.)
Working Pressure : Max BOP 13Kg/cm g at 220 C Steam
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Cast Iron Horizontal Check Valve
Product Standard : BS:5153
Type of Pattern : Straight Type
Pressure / Class / Rating : PN 16
Body Material cum Standard : Cast Iron IBR 86 to 93 Gr.A
Description : Bolted Cover
Type of Seat : Renewable seat
Type of Disc : Renewable disc
Trim : SS AISI-410
End Details : Flanges as per DIN 2533 RF (PN 16) Undrilled
Testing & Certification
Rating : PN 16
Body Test Pressure : 26Kg/cm g (Hyd.)
Seat Test Pressure : 16Kg/cm g (Hyd.)
Working Pressure : Max BOP 13Kg/cm g at 220 C Steam
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Cast Iron Swing Check Valve
Product Standard : BS:5153
Type of Pattern : Straight Type
Pressure / Class / Rating : Class 125
Body Material cum Standard : Cast Iron IBR 86 to 93 Gr.A
Description : Bolted Cover
Type of Seat : Renewable seat
Type of Disc : Renewable disc
Trim : SS AISI-410
End Details : Flanges as per BS 10 Table F undrilled
Testing & Certification
Body Test Pressure : 300 Psig.Hyd.
Seat Test Pressure : 200 Psig.Hyd.
Working Pressure : Max.BOP 150 Psig.(10.54Kg/cm )
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
3386 Industrial Valves Gauges Suppliers
Short on time? Let Industrial Valves Gauges sellers contact you.
