Product : Bronze Globe Steam Stop Valve
Type of Pattern : Straight Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Bolted Bonnet, Outside Screw & Yoke Type, Rising Stem
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
Gland Packing : Expanded Pure Flexible Graphite
End Details : Flanges as per BS 10 Table F F.F. undrilled
Testing & Certification
Body Test Pressure : 300 Psig.Hyd.
Seat & Back Seat Test Pressure : 300 Psig. Hyd. & 150 Psig. Steam
Working Pressure : Max.BOP 150 Psig.(10.54Kg/cm�²)
Maximum Working Temperature: 225 C (435F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Horizontal Lift Check Valve
Type of Pattern : Straight Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Screwed in cover
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
End Details : Screwed female BSP Taper threads to BS 21
Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Seat & Back Seat Test Pressure : 500 Psig. Hyd. & 250 Psig. Steam
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm)
Maximum Working Temperature: 225 C (435 F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Horizontal Lift Check Valve
Type of Pattern : Straight Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Bolted Cover
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
End Details : Screwed female BSP Taper threads to BS 21
Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Seat & Back Seat Test Pressure : 500 Psig. Hyd. & 250 Psig. Steam
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm)
Maximum Working Temperature: 225 C (435 F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Horizontal Lift Check Valve
Type of Pattern : Straight Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Screwed in cover
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
End Details : Flanges as per BS 10 Table H F.F. undrilled
Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Seat & Back Seat Test Pressure : 500 Psig. Hyd. & 250 Psig. Steam
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm )
Maximum Working Temperature: 225 C (435 F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Horizontal Lift Check Valve
Type of Pattern : Straight Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Bolted cover
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
End Details : Flanges as per BS 10 Table H F.F. undrilled
Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Seat & Back Seat Test Pressure : 500 Psig. Hyd. & 250 Psig. Steam
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm)
Maximum Working Temperature: 225 C (435 F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
3386 Industrial Valves Gauges Suppliers
Short on time? Let Industrial Valves Gauges sellers contact you.
Product :Bronze Horizontal Lift Check Valve
Type of Pattern : Straight Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Bolted cover
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
End Details : Flanges as per BS 10 Table F F.F. undrilled
Testing & Certification
Body Test Pressure : 300 Psig.Hyd.
Seat & Back Seat Test Pressure : 300 Psig. Hyd. & 150 Psig. Steam
Working Pressure : Max.BOP 150 Psig.(10.54Kg/cm )
Maximum Working Temperature: 225 C (435 F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Horizontal Lift Check Valve
Type of Pattern : Straight Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Screwed in cover
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
End Details : Flanges as per BS 10 Table F F.F. undrilled
Testing & Certification
Body Test Pressure : 300 Psig.Hyd.
Seat & Back Seat Test Pressure : 300 Psig. Hyd. & 150 Psig. Steam
Working Pressure : Max.BOP 150 Psig.(10.54Kg/cm )
Maximum Working Temperature: 225 C (435 F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Vertical Non Return Valve
Type of Pattern : Vertical Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Two piece design
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
End Details : Screwed female BSP Taper threads to BS 21
Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Seat & Back Seat Test Pressure : 500 Psig. Hyd. & 250 Psig. Steam
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm)
Maximum Working Temperature: 225 C (435 F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Vertical Lift Check Valve
Type of Pattern : Vertical Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Two piece design
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
End Details : Flanges as per BS 10 Table H F.F. undrilled
Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Seat & Back Seat Test Pressure : 500 Psig. Hyd. & 250 Psig. Steam
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm )
Maximum Working Temperature: 225 C (435 F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Safety Valve
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Pop-Type open discharge
Type of Seat : Integral
Type of Disc : Renewable Disc
Trim : Cu-Alloy
End Details : Inlet screwed male BSP Taper threads to BS 21
Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm)
Maximum Working Temperature: 225 C (435 F)
Note : Please advice set pressure while placing order
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Safety Valve
Type of Pattern : Right Angle Pattern
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Pop-Type enclosed discharge
Type of Seat : Integral
Type of Disc : Renewable Disc
Trim : Cu-Alloy
End Details : Inlet screwed male BSP Taper threads to BS 21 Outlet screwed female BSP Parallel threads to BS 21.
Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm�²)
Maximum Working Temperature: 225 C (435 F)
Note : Please advice set pressure while placing order
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Combined Feed Check Valve
Type of Pattern : Right Angle Pattern
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Bolted Gland Flange & Screwed in cover
Type of Seat : Integral
Type of Disc : Renewable Disc
Trim : Cu-Alloy
Gland Packing : Expanded Pure Flexible Graphite
End Details : Flanges as per BS 10 Table H F.F. undrilled
Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Seat & Back Seat Test Pressure : 500 Psig. Hyd. & 250 Psig. Steam
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm )
Maximum Working Temperature: 225 C (435 F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Pressure Gauge Valve
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Type of Seat : Plug type
End Details : Screwed female BSP Parallel threads to BS 21.
Testing & Certification
Hydraulic Test Pressure : 500 Psig.Hyd.
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm )
Maximum Working Temperature: 225 C (435 F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Controllable Feed Check Valve
Type of Pattern : Right Angle
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Screwed in Bonnet, OS Yoke Type , Rising Stem (15mm to 32mm)
Bolted Bonnet, OS Yoke Type, Rising Stem (40mm to 50mm)
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
Gland Packing : Expanded Pure Flexible Graphite
End Details : Screwed female BSP Taper threads to BS 21
Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Seat & Back Seat Test Pressure : 500 Psig. Hyd. & 250 Psig. Steam
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm)
Maximum Working Temperature: 225C (435F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product :Bronze Controllable Feed Check Valve
Type of Pattern : Straight Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Screwed in Bonnet, OS Yoke Type , Rising Stem (15mm to 32mm)
Bolted Bonnet, OS Yoke Type, Rising Stem (40mm to 50mm)
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
Gland Packing : Expanded Pure Flexible Graphite
End Details : Screwed female BSP Taper threads to BS 21
Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Seat & Back Seat Test Pressure : 500 Psig. Hyd. & 250 Psig. Steam
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm)
Maximum Working Temperature: 225 C (435 F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product :Bronze Controllable Feed Check Valve
Type of Pattern : Right Angle
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Screwed in Bonnet, OS Yoke Type , Rising Stem (15mm to 32mm)
Bolted Bonnet, OS Yoke Type, Rising Stem (40mm to 50mm)
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
Gland Packing : Expanded Pure Flexible Graphite
End Details : Flanges as per BS 10 Table H F.F. undrilled
Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Seat & Back Seat Test Pressure : 500 Psig. Hyd. & 250 Psig. Steam
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm)
Maximum Working Temperature: 225 C (435 F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Controllable Feed Check Valve
Type of Pattern : Straight Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Screwed in Bonnet, OS Yoke Type , Rising Stem (15mm to 32mm)
Bolted Bonnet, OS Yoke Type, Rising Stem (40mm to 50mm)
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
Gland Packing : Expanded Pure Flexible Graphite
End Details : Flanges as per BS 10 Table H F.F. undrilled
Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Seat & Back Seat Test Pressure : 500 Psig. Hyd. & 250 Psig. Steam
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm�?�²)
Maximum Working Temperature: 225 C (435 F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Asbestos Packed Water Level Gauge
Type of Pattern : Standard Pattern
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Right Hand Type / Left Hand Type
Gland Packing : Expanded Pure Flexible Graphite
End Details : Screwed male BSP Parallel threads to BS 21.
Testing & Certification
Hydraulic Test Pressure : 300 Psig.Hyd.
Working Pressure : Max.BOP 150 Psig.(10.54Kg/cm)
Maximum Working Temperature: 225 C (435 F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Asbestos Packed Water Level Gauge
Type of Pattern : Standard Pattern
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Right Hand Type / Left Hand Type
Gland Packing : Expanded Pure Flexible Graphite
End Details : Flanges as per BS 10 Table F F.F. undrilled
Testing & Certification
Hydraulic Test Pressure : 300 Psig.Hyd.
Working Pressure : Max.BOP 150 Psig.(10.54Kg/cm)
Maximum Working Temperature: 225 C (435 F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product :Bronze Sleeve Packed Water Level Gauge
Type of Pattern : Standard Pattern
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : With automatic shut off device in water
Arm : Right Hand Type / Left Hand Type
End Details : Flanges as per BS 10 Table H F.F. undrilled
Testing & Certification
Hydraulic Test Pressure : 500 Psig.Hyd.
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm)
Maximum Working Temperature : 435 F (225 C)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
3386 Industrial Valves Gauges Suppliers
Short on time? Let Industrial Valves Gauges sellers contact you.
