Product : Cast Iron Ball Valve
Product Standard : IS:9890 Class 125
Type of Pattern : Straight
Body Material cum Standard : Cast Iron IS:210 Gr.FG220
Description : Two piece design
Type of Seat : Renewable Teflon
Trim : Stem: SS AISI-410, Ball: SS AISI-304
Gland Packing : Teflon Rings
End Details : Screwed female Parallel threads as per IS:554
NOTE : Cover will be screwed in type for 50mm valve size & below
Testing & Certification
Body Test Pressure : 300 Psig. Hyd.
Seat Test Pressure : 220 Psig. Hyd., 100 Psig. Air
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product : Cast Iron Ball Valve
Product Standard : IS:9890 Class 125
Body Material cum Standard : Cast Iron IS:210 Gr.FG220
Description : Three piece design
Type of Seat : Renewable Teflon
Trim : Stem: SS AISI-410 Stainless Steel, Ball: SS AISI-304
Gland Packing : Teflon Rings
End Details : Flanges as per IS:3516-1966 undrilled/B.S.10 Table F
Testing & Certification
Body Test Pressure : 300 Psig. (21 bar g) Hyd.
Seat Test Pressure : 220 Psig. (15.4 bar g) Hyd., 100 Psig. (6.9 bar g) Air
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product :Investment Casting Ball Valve (CF-8)
Pressure/Class /Rating : PN-40
Body Material cum standard : SS 304 (CF-8)
Product Description : Two Piece design
Type of Seat : Renewable Teflon
Trim : Stem, Ball Stainless Steel AISI-304
Gland Packing : Teflon
End Details : Screwed Female BSP Taper Threads to BS 21
Testing & Certification
Body Test Pressure : 60kg/cm Hyd.
Seat Test Pressure : 40kg/cm Hyd.
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product : S.S. Wafer Disc Check Valve
Pressure/Class /Rating : PN-40
Body Material cum standard : CF-8
Product Description : Wafer Type Spring Loaded
Type of Disc : Stainless Steel CF-8
End Details : Wafer Type Suitable for Clamping between Flanges as per
ASME B 16.5 Class-150, Class-300, PN-40
Testing & Certification
Body Test Pressure : 60 Barg Hyd.
Seat Test Pressure : 40 Barg Hyd.
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product : I.C. Stainless Steel Steam Trap
Body Material cum standard : Stainless Steel ASTM A 743 Gr. CA40
Product Description : Thermodynamic Type Steam Trap
with inbuilt strainer
Trim : AISI-420
End Details : Screwed Female BSP Taper Threads to BS 21
Testing & Certification
Body Test Pressure : 63.3 kg/cm 900 Psig. (Hyd.)
Working Pressure : Suitable for 450 Psig. (31.65 kg/cm )
Maximum Working Temperature : 400 C (750 F)
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
3386 Industrial Valves Gauges Suppliers
Short on time? Let Industrial Valves Gauges sellers contact you.
Product : Cast Iron Sluice Valve
Product Standard : IS:14846
Pressure / Class / Rating : PN 10 PD Type
Body Material cum Standard : Cast Iron IS:210 Gr.FG200
Description : Bolted Bonnet, Inside Screw & Non Rising Stem
Type of Seat : Renewable seat
Type of Disc : Solid wedge
Trim : Cu-Alloy Rings, stem SS (12 Cr.12)
Gland Packing : Rubber O Ring
End Details : Flanges as per IS:1538 FF drilled
Testing & Certification
Body Test Pressure : 1.5MPa (Hyd.),
Seat Test Pressure : 1.0MPa (Hyd.)
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product : Cast Iron Wedge Gate Sluice Valve
Product Standard : Face To Face as per IS:14846
Pressure / Class / Rating : PN 10 PD Type
Body Material cum Standard : Cast Iron IS:210 Gr.FG200
Description : Bolted Bonnet, Outside Screw & Yoke Type Rising Stem
Type of Seat : Renewable seat
Type of Disc : Solid wedge
Trim : Cu-Alloy Rings, Stem SS AISI-410
Gland Packing : Expanded Pure Flexible Graphite
End Details : Flanges as per IS:1538 FF drilled
Testing & Certification
Body Test Pressure : 1.5MPa (Hyd.)
Seat Test Pressure : 1.0MPa (Hyd.)
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product : Cast Iron Sluice Valve
Product Standard : IS:14846
Pressure / Class / Rating : PN 16 PD Type
Body Material cum Standard : Cast Iron IS:210 Gr.FG200
Description : Bolted Bonnet, Inside Screw & Non Rising Stem
Type of Seat : Renewable seat
Type of Disc : Solid wedge
Trim : Cu-Alloy Rings, stem SS (12 Cr.12)
Gland Packing : Rubber O Ring
End Details : Flanges as per IS:1538 FF drilled
Testing & Certification
Body Test Pressure : 2.4MPa (Hyd.)
Seat Test Pressure : 1.6MPa (Hyd.)
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product : Cast Iron Wedge Gate Sluice Valve
Pressure / Class / Rating : PN 1.6 PD Type
Body Material cum Standard : Cast Iron IS:210 Gr.FG200
Description : Bolted Bonnet, Inside Screw & Non Rising Stem
Type of Seat : Renewable seat
Type of Disc : Solid wedge
Trim : Cu-Alloy Rings, Stem SS AISI-410
Gland Packing : Expanded Pure Flexible Graphite
End Details : Flanges as per IS:1538 FF drilled
Testing & Certification
Body Test Pressure : 2.4MPa (Hyd.) Min.
Seat Test Pressure : 1.6MPa (Hyd.) Min.
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product : Cast Iron Wedge Gate Sluice Valve
Product Standard : Face To Face as per IS:14846
Pressure / Class / Rating : PN 16 PD Type
Body Material cum Standard : Cast Iron IS:210 Gr.FG200
Description : Bolted Bonnet, Outside Screw & Yoke Type Rising Stem
Type of Seat : Renewable seat
Type of Disc : Solid wedge
Trim : Cu-Alloy Rings, Stem SS AISI-410
Gland Packing : Rubber
End Details : Flanges as per IS:1538 FF drilled
Testing & Certification
Body Test Pressure : 2.4MPa (Hyd.)
Seat Test Pressure : 1.6MPa (Hyd.)
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product : Cast Iron Wedge Gate Sluice Valve
Product Standard : Face to Face & Flange Dimensions as per IS:780
Pressure / Class / Rating : PN 10
Body Material cum Standard : Cast Iron IS:210 Gr.FG200
Description : Bolted Bonnet, Inside Screw & Non Rising Stem
Type of Seat : Renewable seat
Type of Disc : Renewable Solid wedge
Trim : Cu-Alloy Rings, Stem SS AISI-410
Gland Packing : Expanded Pure Flexible Graphite
End Details : Flanges as per IS:780 / IS:1538 FF drilled
Testing & Certification
Body Test Pressure : 1.5MPa (Hyd.)
Seat Test Pressure : 1.0MPa (Hyd.)
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product : Cast Iron Wedge Gate Sluice Valve
Product Standard : Flange Dimensions as per BS 10 Table D
Pressure / Class / Rating : PN 10
Body Material cum Standard : Cast Iron IS:210 Gr.FG200
Description : Bolted Bonnet, Inside Screw & Non Rising Stem
Type of Seat : Renewable seat
Type of Disc : Renewable Solid wedge
Trim : Cu-Alloy Rings, Stem SS AISI-410
Gland Packing : Expanded Pure Flexible Graphite
End Details : Flanges as per BS 10 Table D
Testing & Certification
Body Test Pressure : 1.5MPa (Hyd.)
Seat Test Pressure : 1.0MPa (Hyd.)
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product : Cast Iron Butterfly Valve
Type of Pattern : Short Pattern
Product Standard : IS:13095
Pressure / Class / Rating : PN 10/PN 16
Body Material cum Standard : Cast Iron IS:210 Gr.FG200
Description : Wafer Type
Type of Seat : Nitrile / EPDM Lining
Type of Disc : SG Iron
Trim : SS AISI-410
End Details : Suitable insertion between Flanges as per BS 10 Table D/E ANSI B 16.1 CI-125
Testing & Certification
Ratings:
PN10
Body Test Pressure : 1.5MPa (218 Psig) Hyd
Seat Test Pressure : 1.1MPa (160 Psig) Hyd
PN16
Body Test Pressure : 2.4MPa (348 Psig) Hyd
Seat Test Pressure : 1.8MPa (261 Psig) Hyd
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product : Cast Iron Butterfly Valve
Type of Pattern : Medium Pattern
Product Standard : IS:13095
Pressure / Class / Rating : PN 10/PN 16
Body Material cum Standard : Cast Iron IS:210 Gr.FG200
Description : Wafer Type
Type of Seat : Nitrile / EPDM Lining
Type of Disc : SG Iron
Trim : SS AISI-410
End Details : Suitable insertion between Flanges as per BS 10 Table D/E ANSI B 16.1 CI-125
Testing & Certification
Ratings:
PN10
Body Test Pressure : 1.5MPa (218 Psig) Hyd
Seat Test Pressure : 1.1MPa (160 Psig) Hyd
PN16
Body Test Pressure : 2.4MPa (348 Psig) Hyd
Seat Test Pressure : 1.8MPa (261 Psig) Hyd
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product : Cast Iron Butterfly Valve
Type of Pattern : Short Pattern
Product Standard : IS:13095
Pressure / Class / Rating : PN 10/PN 16
Body Material cum Standard : Cast Iron IS:210 Gr.FG200
Description : Wafer Type
Type of Seat : Nitrile / EPDM Lining
Type of Disc : SS CF8
Trim : SS AISI-410
End Details : Suitable insertion between Flanges as per BS 10 Table D/E ANSI B 16.1 Class 125
Note: Worm gear arrangement for 200mm and Above
Testing & Certification
Ratings:
PN10
Body Test Pressure : 1.5MPa (218 Psig) Hyd
Seat Test Pressure : 1.1MPa (160 Psig) Hyd
PN16
Body Test Pressure : 2.4MPa (348 Psig) Hyd
Seat Test Pressure : 1.8MPa (261 Psig) Hyd
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product :Cast Iron Butterfly Valve
Type of Pattern : Medium Pattern
Product Standard : IS:13095
Pressure / Class / Rating : PN 10/PN 16
Body Material cum Standard : Cast Iron IS:210 Gr.FG200
Description : Wafer Type
Type of Seat : Nitrile / EPDM Lining
Type of Disc : SS CF8
Trim : SS AISI-410
End Details : Suitable insertion between Flanges as per BS 10 Table D/E ANSI B 16.1 Class â?? 125
Testing & Certification
Ratings:
PN10
Body Test Pressure : 1.5MPa (218 Psig) Hyd
Seat Test Pressure : 1.1MPa (160 Psig) Hyd
PN16
Body Test Pressure : 2.4MPa (348 Psig) Hyd
Seat Test Pressure : 1.8MPa (261 Psig) Hyd
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product :Cast Iron Butterfly Valve (Lever Operated)
Type of Pattern : Short Pattern
Pressure / Class / Rating : PN 10
Body Material cum Standard : Cast Iron IS:210 Gr.FG200
Description : Wafer Type
Type of Seat : Nitrile / EPDM Lining
Type of Disc : SG Iron
Trim : SS AISI-410
End Details : Suitable insertion between Flanges as per BS 10 Table D/E ANSI B 16.1 CI-125
Testing & Certification
Body Test Pressure : 1.5MPa (218 Psig) Hyd
Seat Test Pressure : 1.0MPa (145 Psig) Hyd
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product : Cast Iron Butterfly Valve (Lever Operated)
Type of Pattern : Short Pattern
Pressure / Class / Rating : PN 10
Body Material cum Standard : Cast Iron IS:210 Gr.FG200
Description : Wafer Type
Type of Seat : Nitrile / EPDM Lining
Type of Disc : SS
Trim : SS AISI-410
End Details : Suitable insertion between Flanges as per BS 10 Table D/E ANSI B 16.1 CI-125
Testing & Certification
Body Test Pressure : 1.5MPa (218 Psig) Hyd
Seat Test Pressure : 1.0MPa (145 Psig) Hyd
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product : C.I. Butterfly Valve
Type of Pattern : Wafer Type
Pressure / Class / Rating : PN 20
Body Material cum Standard : Cast Iron to IS:210 Gr.FG200
Description : Wafer Type
Type of Seat : Nitrile / EPDM Lining
Type of Disc : SS Seat CF8
Trim : SS AISI-410
End Details : Suitable insertion between Flanges as per BS 10 Table D/E or ASME B 16.1, Class 125
Note : Gear system will be provided for size above 150mm.
Testing & Certification
Body Test Pressure : 3.0MPa
Seat Test Pressure : 2.2MPa
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product : Cast Iron Butterfly Valve
Type of Pattern : Short Pattern
Pressure / Class / Rating : PN 16
Body Material cum Standard : Cast Iron IS:210 Gr.FG200
Description : Wafer Type
Type of Seat : EPDM Lining
Type of Disc : CF8M
Stem : SS AISI-304
End Details : Suitable insertion between Flanges as per BS 10 Table D/E ANSI B 16.1 Class 125
Note : Gear system will be provided for size above 150mm.
Testing & Certification
Body Test Pressure : 2.4MPa (348 Psig) Hyd
Seat Test Pressure : 1.6MPa (232 Psig) Hyd
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
3386 Industrial Valves Gauges Suppliers
Short on time? Let Industrial Valves Gauges sellers contact you.
