Product : Stainless Steel Ball Valve (F), SS (304)
Pressure/Class/Rated : Class-150
Body Material Cum Standard : S.S. AISI-304 (CF-8)
Product Description : 3 Pc Design Lever Operated
Type of Seat : Renewable
Stem : AISI-410
Ball : AISI-304 (CF-8)
Seat Ring & Gland Packing : PTFE
End Details : Flanges as per B 16.5 Class-150 (Drilled)
Testing & Certification
Body Test Pressure : 30 Barg (435psig. Hyd.)
Seat Test Pressure : 22 barg (320psig. Hyd.)
Maximum Working Temp. : 225 C
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Product : C.I. Butterfly Valve with Pneumatic Actuator
Type of Pattern : Water Type
Pressure/Class/Rating : PN 10/PN 16
Body Material Cum Standard : CI to IS:210 Gr FG200
Product Description : Wafer Type
Type of Seat : Nitrile/EPDM Lining
Type of Disc : Stainless Steel CF8
Stem : AISI-410
End Details : Suitable insertion between flanges as per BS 10 Table
F/D/E or ASME B 16.1 Class-125
Testing & Certification
Ratings:
PN10
Body Test Pressure : 1.5MPa (218 Psig) Hyd
Seat Test Pressure : 1.1MPa (160 Psig) Hyd
PN16
Body Test Pressure : 2.4MPa (348 Psig) Hyd
Seat Test Pressure : 1.8MPa (261 Psig) Hyd
(APS Marines & Logistics)
Product : C.I. Butterfly Valve with Limit Switch
Type of Pattern : Water Type
Pressure/Class/Rating : PN 10/PN 16
Body Material Cum Standard : CI to IS:210 Gr FG200
Product Description : Wafer Type
Type of Seat : Nitrile/EPDM Lining
Type of Disc : SS Seat CF8
Stem : AISI-410
End Details : Suitable insertion between flanges as per BS 10 Table
F/D/E or ASME B 16.1 Class-125
Testing & Certification
Ratings:
PN10
Body Test Pressure : 1.5MPa (218 Psig) Hyd
Seat Test Pressure : 1.1MPa (160 Psig) Hyd
PN16
Body Test Pressure : 2.4MPa (348 Psig) Hyd
Seat Test Pressure : 1.8MPa (261 Psig) Hyd
(APS Marines & Logistics)
Product :C.I. Butterfly Valve with Electric Actuator
Type of Pattern : Water Type
Pressure/Class/Rating : PN 10/PN 16
Body Material Cum Standard : CI to IS:210 Gr FG200
Type of Lining : EPDM
Type of Disc : SS CF 8
Stem : AISI-410
End Details : Suitable insertion between flanges
as ASME B 16.1 or Class-125
Testing & Certification
Ratings:
PN10
Body Test Pressure : 1.5MPa (218 Psig) Hyd
Seat Test Pressure : 1.1MPa (160 Psig) Hyd
PN16
Body Test Pressure : 2.4MPa (348 Psig) Hyd
Seat Test Pressure : 1.8MPa (261 Psig) Hyd
Product : Brass Filter Valve (Y-Type Strainer)
Body Material : Forged Brass
Product Description : Screwed in cover
Material of Filter : Stainless Steel AISI-304
Testing & Certification
Body Test Pressure : 2.4 MPa (348Psig.) Hyd.
Working Pressure : 1.6 MPa (232 Psig.) Max.
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
3420 Industrial Valves Gauges Suppliers
Short on time? Let Industrial Valves Gauges sellers contact you.
Product :C.I. Butterfly Valve Wafer Type (Lever Operated)
Type of Pattern : Replaceable Seat & Disc
Pressure/Class /Rating : PN16
Body Material cum standard : Cast Iron to IS:210 FG 200
Type of Lining : EPDM Lining
Type of Disc : SS 304
Stem : AISI-410
End Details : Suitable between Flanges as ASME B 16.1 or CIass-125AISI
Testing & Certification
Body Test Pressure : 2.4MPa (Hyd.)
Seat Test Pressure : 1.6MPa (Hyd.)
Our Works Test Certificate is furnished with every supply.
(APS Marines & Logistics)
Jacketed plug valves have a simple structure, can quick to open and close, very low flow resistance, are easy to maintain, and also have good sealed performance. Chemical, petroleum, and other industrial piping systems are all monitored with this unit. By offering the best quality and material Specialityvalve has become the leading Jacketed plug valve manufacturer in India.
There are two types of jacketed plug valve one is Half Jacket and another on is full Jacket. Jacketed plug valve has the main advantage of keeping warm and cold at the same time. It can reduce the airflow of the medium and transfer the high flow which will solidify at room temperature.
Specialityvalve is one of the fast developing Lubricated Plug Valve Manufacturer in India. Specialityvalve manufacture and supply valves globally for various businesses. We have highly knowledgeable and skilled work force having a vision to grow in the market. We assure you that our products are high in performance and has unmatched quality and reliability. Our products have also excelled in all the requirements of the market.
Lubricated Plug Valve that uses a tapered or a cylindrical plug to start or stop the flow of the medium. In this type of valve, the plug inside is lubricated. The lubricant in these valves reduces the force to open and close and it allows smooth movement of the plug. These valves are available in larger size range. They are fit to work in high pressure temperature services. It also prevents the valve from corrosion as it is made up of anti-corrosive materials.
Advantages of Lubricated Plug valve: If there is any repair, it can be done without interrupting the pipeline.
They are available in large sizes. Leak proof.
Highly corrosive resistant.
Body Material carbon steel, CF8M, WCB, CF8, Stainless Steel [SS316, SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L, F51, F3,F55, F91 ] , WCB, WC6, SS304, SS316, DUPLEX STEEL
Class 150 2500 PN 60 PN450
Size1/2 to 16
Ends butt weld, socket weld, threaded, flanged
Applications: lever actuated Lubricated plug valve, pneumatic actuated Lubricated plug valve, electric actuated Lubricated plug valve, gear actuated Lubricated plug valve
Specialityvalve is a leading Trunnion ball valve manufacturer in India. Trunnion ball valves also technically termed as Quarter turn valve are used to kick off or stop the flow of media in a pipe. The ball of a trunnion ball valve attaches to the stem on one end and to a shaft called the trunnion on the other. The ball is attached to the trunnion hence it is beneficial since it maintains a proper seal on both sides and the stem is not subjected to additional torque. As a result, a trunnion ball valve can have better sealing and require less torque to turn for higher pressure applications. Our Trunnion ball valve is tough and reliable for any industrial use.
Types of trunnion ball valve:
Forged trunnion ball valve.
Casting trunnion ball valve.
Advantages of a trunnion ball valve:
They are suitable for high or low pressure implementations.
Lower operational cost.
Industries that uses trunnion ball valves:
Oil and gas industries.
Petrochemical industry.
Body material Carbon Steel (WCC, WCB, LCB, LCC,WC6, WC9), Stainless Steel [SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L, F51, F3, F55, F91], Duplex, Super duplex
Class 150 LB 2500 LB
Size 2 48
Ends butt weld, socket weld, flanged
Trunnion ball valve is available in a range of styles and sizes, depending on the needs of the consumer. Specialityvalve is a major manufacturer of high-quality products, and the key to our success in the valves industry is our well-integrated work climate. Our infrastructure is spread out over a large region, with plenty of space for development.
Find here Check Valves, Industrial Check Valves manufacturers & suppliersin India.Get contact detail & address of companies manufacturing and supplying Check Valves, Industrial Check Valves across India.Check Valve supplier in all over India, also we supply all types of Industrial Materials, contact us for your bulk material requirements.
3 Port 2 Position Direct Acting Normally Closed General Purpose Solenoid Valve
Features:
Bubble tight shut off.
Mounts in any position.
Vibration resistance upto 5g.
Suitable for high speed cycling.
Speed up to 1000 cycles/ min.
Life >10 million cycles.
Ball valves use a metal ball with a hole bored through the center, sandwiched between two seats to control flow. Used in many hydrocarbon process applications, ball valves are capable of throttling gases and vapors and are especially useful for low-flow situations
It consists of a valve connected to a hollow sealed float by means of a lever, mounted near the top of the tank. The float is often ball-shaped. The valve is connected to the incoming water supply, and is opened and closed by the lever which has the float mounted on the end. When the water level rises, the float rises with it; once it rises to a pre-set level, the mechanism forces the lever to close the valve and shut off the water flow.
Design - API 600, BS 1414
Application - Oil and Gas, Refinery, Petrochemical, Pharmaceutical, Chemicals, Steel sectors, Power, Textile
Face to face - ASME B16.10
Flanges - ASME B16.5 from 2" to 24" BW to asme B16.25
Testing - API 598
Model - 2VEE8
Process side - 1/2" NPT female
Instrument side - 1/2" NPT female
Vent test - 1/4" NPT female
Maximum working pressure - 6000psi
With threaded vertical port inlet and outlet. The vent/test connection is positioned on the front side.The drain bonnet is positioned on the right hand side and the isolating bonnet on the left hand side
Model - 5VEE9
Process side - 1/2" NPT female
Instrument side - 1/2" NPT female
Vent test - 1/4" NPT female
Maximum working pressure - 6000psi
With threaded vertical port inlets and outlets. The vent/test port are positioned on the bottom and top of the body. The isolating bonnets are positioned on the left and right hand side and the venting and equalizing bonnets are positionded on the front side. Specially designed for remote mounting to field meters, defferential transmitters and chart recorders on gas service allowing fail safe configuration preventing pressure loss from the high to low pressure impulse lines.
Material - Stainless Steel
Model - NVEE
Design pressure - 6000 psi
Max temp - 240 degree C
Type needle valves with hard seat are disigned for use on applications requiring complete isolation or throttling of the media. The conical metal tip press fitted ensures perfect alignment for positive bubble tight shut-off. Available with end connections in sizes from 1/8" to 1" and a wide choice in connections of female screwd, male screwed, male to female screwed or socket weld.
Applications:
High pressure line shut of
Instrument isolation
Drain valve
Liquid and vapor service
Technical Data:
All dimensions are in mm
Stem Press fitted hard chrome plated
Grand packing PTFE
Stem packing are Burnished for smooth valve operation
Safety feature Back seating for preventing stem blowout
Optional:
NVEE 10: High pressure valves for 10000 psi pressure
Nvee 20: High pressure valves for 20000 psi pressure
Model - 2VEE6
Process side - 1/2" NPT female
Vent test - 1/4" NPT female
Maximum working pressure - 6000psi
With threaded horizontal port inlet on the from side and flange outlet on the back side, test connection on the body. The isolating bonnet are positioned on the left and right hand side the equalizing bonnet is positioned on the top.
3420 Industrial Valves Gauges Suppliers
Short on time? Let Industrial Valves Gauges sellers contact you.
