We are manufacture of Pusher Centrifuge in Pune, Maharashtra, India. Our pusher centrifuge has established and proved itself as a modern high-performance machine in many areas of industry. Such as Chemicals, Pharmaceuticals, Mining and Minerals, Common Salt (Sodium Chloride), Agriculture and Food Industries, Plastic Processing, Fiber Industry, etc.
Pusher Operation: Solids collected on the screen and feed liquors drain through. The pusher plate rotates with the basket and reciprocates. On the forward stroke, the plate pushes solids along the screen, Consolidating the solids into a uniform cake. On the reverse stroke, fresh screen is exposed and more slurry is deposited. Cake dries as it moves along the length of the screen and wash liquor May be applied to remove impurities. Cake is pushed off the discharge end of the screen and directed to the Collection chute.
* Benefits:
High Product quality & increased performance through proper selection of the Basket configuration, feed accelerator and Screen.
Simple and easy maintenance through service-friendly design.
Choice of drives: Mechanical and Hydraulic drives are available.
Quick installation on Vibration dampers.
Simple & continuous operation & and reduce operating cost.
High yields, throughput & wash efficiency.
Low energy consumption.
No spillage.
Eliminates manual handling.
Maintenance: simple & low-Cost.
Less floor space requirement.
Practically no manpower required for operation and is a fully automated continuous operation.
These pumps are commonly used for collecting the water from deep layer of ground water resource and distributing the same for the use in various purpose. Our product are manufacture with high quality accessories of the pump for durability and best performance.
DEEP WELL HAND PUMP COMPLETE WITH 10 CONNECTING RODS
No. of Size
Outfitted with a modern infrastructure, we are the most prominent manufacturer and supplier of a wide array of Rubber Diaphragms. These products are manufactured using supreme grade material and contemporary techniques under the surveillance of trained professionals. Further, these products are stringently checked on different quality parameters assuring their flawlessness and long life at userâ??s end. We offer these products to our clients at affordable rates.
Features:
Stretchable
High strength
Finley finished
2037 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
These vertical pumps are designed to operate with the pumping elements immersed in the product. These pumps are compact and space saving. They are custom designed and are manufactured for varying column length to suite the pump depth. The suction port of all the pump sizes are designed so that a strainer can be attached to prevent and large solids entering the pump.
These pumps are available in only close coupled configuration. A variety of material of construction, shaft sealing options are also available.
Single Stage Pump
Capacities upto 500 m3/hr
Pressures upto 12 bar
These vertical pumps are designed to operate with the pumping elements immersed in the product. These pumps are compact and space saving. They are custom designed and manufactured for varying column lengths to suite the sump depth.
Vertical-Single-Stage
Multi Stage Pump
Capacities upto 500 m3/hr
Pressures upto 12 bar
These vertical pumps are designed to operate with the pumping elements immersed in the product. These pumps are compact and space saving. They are custom designed and manufactured for varying column lengths to suite the sump depth.
Material Options
WETTABLE HOUSING COMPONENTS:
Fabricated Steel Fabricated Stainless Steel.
STATOR:
Natural Nitrile High Nitrile EPDM Chloro-Sulphonated Rubber Fluoroelastomer Aflas HNBR.
ROTOR:
Tool Steel Case Hardened Steel Alloy Steel Stainless Steel.
COUPLING ROD:
Alloy Steel Stainless Steel.
SHAFT:
Alloy Steel Stainless Steel.
OTHER EXOTIC MATERIALS:
Duplex Super Duplex Alloy 20 Haste alloy.
ROTOR SURFACE COATINGS:
Ceramic Coatings Tungsten Carbide Hard Chrome Plating.
PROTECTIVE COATINGS:
Rubber Lining Epoxy Coatings.
Price Range: Rs.25000 to Rs. 50 Lacs*
* Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
Rotos Dosing Pumps The best choice for precise metering applications
These pumps are developed for low flow applications that demand high accuracies and repeatability with unique advantages of smooth, laminar & pulsating free flow. These pumps can handle clean and clear liquids.
A range of dosing pumps offering an efficient and reliable solution for applications where accurate dosing is required. The pump is ideal for either intermittent or continuous dosing duties. Product manufactured as per ISO 9001:2015 quality assurance standards and performance ranges available from 0.68 litres per hour (0.0029 GPM )to 460 litres per hour (2.02 GPM) and upto 24 bar pressure (348 PSI).
Features & Benefits
Linear flow with low shear
Capacity is directly proportional to speed
Inherently self-priming
No internal valves no clogging
Low NPSH required
Reversible
Suction lift capacity upto 9.5 meter water column
Easily changing pumping element for different capacities
Simple to operate
Highly efficient
RJ Series Pump
Capacities between 0.68 500 lph
Pressures upto 24 bar
These pumps are developed for low flow applications that demand high accuracies and repeatability. These pumps can handle wide variety of fluids ranging from clean and clear liquids to abrasive, corrosive, viscous and solid laden media. The repeatability accuracy has less than 1% fluctuation. Available in 6 capacities and 3 pressure ranges.
The most versatile pump for light industrial, agricultural & domestic applications UV resistant Acetyl-co-polymer housing for pump sizes 11, 12 & 31 Cast Iron casing for pump sizes 41& 51.
Features & Benefits:
Flow is directly proportional to the speed
Suction lift capacity up to 8m
Minimal pulsation avoids damage to shear sensitive products
Can handle liquids with fine solids
Minimum impacts with efficiencies with varying heads
Simple in design and easy to dismantle
Low maintenance cost
Material Options for these pumps:
DC Series
Wettable Housing Components:
UV Resistant acetate co-polymer housing for pump sizes DC 11 & DC 31.
C.I. Housing parts for pump size DC 41 & DC 51.
Stator:
Natural, Nitrile High Nitrile Fluoroelastomer.
Rotor:
Stainless Steel
Shaft:
Stainless Steel
Rotor Surface Coatings:
Hard Chrome Plating
MC Series:
Wettable Housing Components:
Cast Iron
Stator:
Natural Nitrile High Nitrile EPDM Chloro-Sulphonated Rubber Fluoroelastomer
Rotor:
Stainless Steel
Shaft:
Stainless Steel
Rotor Surface Coatings:
Hard Chrome Plating
SC Series
Wettable Housing Components:
Ductile Iron Cast Stainless Steel
Stator:
Natural Nitrile High Nitrile EPDM Chloro-Sulphonated Rubber Fluoroelastomer.
Rotor:
Stainless Steel
Shaft:
Stainless Steel
Rotor Surface Coatings:
Hard Chrome Plating
Price Range: Rs. 10,000-Rs. 30,000*
* Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
Roto Xtra Value Progressive Cavity pumps are of heavy-duty construction and are designed to pump tough to handle fluids with ease. These pumps are used in many areas of Industry. The construction of these pumps is based on the modular concepts and incorporates next-generation pumping elements (molded to metal) stator, solid shaft and double sealed Cardan Universal Joints for improved performance and longer service life. These pumps are available in bare shaft and close coupled configuration. 6 and 8 stages in select sizes. A variety of material of construction, shaft sealing options are also available.
Single Stage Pump:
This Heavy-Duty cost effective pumps use the extended Rotor, Stator Geometry and result in lower rubbing velocities which are ideal for the Sewage & Effluent Treatment applications. These Pumps are available in Close-Coupled & Bareshaft Configuration.
Multi-Stage Pump:
These heavy-duty pumps are designed for continuous or intermittent duty and are suitable to perform efficiently even for the most difficult fluid handling applications in wastewater,chemical, and food industries. These pumps are available in bare shaft and close coupled configurations. 6 and 8 stage pumps are also available in select sizes.
Rotor: Tool Steel Case Hardened Steel Alloy Steel Stainless Steel
Coupling Rod: Alloy Steel Stainless Steel
Shaft: Alloy Steel Stainless Steel
Other Exotic Materials: Duplex Super Duplex Alloy 20 Haste alloy
Rotor Surface Coatings: Ceramic Coatings Tungsten Carbide Hard Chrome Plating
Protective Coatings: Rubber Lining Epoxy Coatings
Price Range: Rs. 25000 to Rs. 20 lacs*
* Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
Built on heavy duty and proven platform, The Tirrana range of helical rotor pumps offers a peace of mind solution to all types of surface water transfer duties
Material Options
Wettable Housing Parts: Cast Iron
Rotor: Stainless Steel 410, Hard chrome plated
Stator: Natural, Nitrile
Shaft and Coupling Rod: Stainless Steel 410**
* Above material options are standard for Tirrana Range, contact Roto for other material requirement
** With gland packing, Shaft is Hard chrome plated under gland area.
Applications:
Ideal for tank filling or stock watering from dams, creeks, wells and rivers.
Can handle clean water, brown water, dirty water with sand, silt or algae.
Price range: Rs. 25000 to Rs. 10 Lacs*
* Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
Cost effective way to protect pumps
macerate the solid and fibrous components in pumped products . Increases operational safety, extends service life of downstream equipment and reduces operating costs.
Advantages to End Users :
Optimal cutting performance
Less spare parts
Fewer spare parts
Reduced downtime for routine servicing process
Creation of pre-conditioned medium
Lower running costs
Typical Applications :
Food products and waste
Slaughterhouse waste
Mud contaminated drill cutting
Municipal and industrial effluent treatment
Price Range: Rs.100000- Rs.10,00,000*
* Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
Fetaures and Benefits :
Low Vibration
Excellent abrasive liquid resistance
very compact design
up to 35% lower air consumption
Operating in each position
Dry running capability
Low maintenance cost
High strock frequency means low liquid pulsation
Equipped with PEEK flat valves
Low Noice
Price Range: Rs.30000-Rs.100000*
* Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
Roto s Vertical Twin Screw Pumps are available in both external & internal bearing configuration. Pumps with steam jackteing as an option is also available. The suction & discharge ports are in a line.
Mechanical seals are standard. Option for gland packing is also available. Pumps are fitted with relief valves suitable for 100% bypass.
Vertical Internal / External Bearing RV series
Capacities upto 500 m3/hr
Pressures upto 40 bar
These pumps are designed to suit the areas where space is a constraint. They are available in internal as well as external bearing configurations. These pumps can handle fluids with high temperatures upto 3500C / 6600F with or without steam jacketing, electrical/steam tracing arrangement as an option. API 682 type seals can be mounted. Built in safety relief valve designed for 100% bypass.
* Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
These pumps are designed for handling food applications. All metallic parts in contact with the medium being handled are fabricated in smooth finish stainless steel. These pumps are provided with metal bonded aseptic food grade elastomeric stator resistant to oil & fats. These pumps are standard with closed universal joints enabling it to handle fluids which are poor lubricants like aerated or dematerialized water as well as lubricating type applications. Available in close coupled and bare shaft configuration. Sealing is by Hygienic quality packed gland or Mechanical Seal. These pumps are also available with CIP port configuration. For high viscous and difficult to flow liquids these pumps are also available with wide throat configuration.
Single Stage Pump:
These Heavy Duty semi-hygienic pumps are specifically designed for Wine & beverage transfer applications and can also be used for other Food & Beverages applications. Standard connections include IDF, SMS & RJT.
Multi Stage Pump:
These Heavy Duty semi-hygienic pumps are specifically designed for Wine & beverage transfer applications and can also be used for other Food & Beverages applications. Standard connections include IDF, SMS & RJT.
Stator:
Nitrile Black Nitrile White EPDM Black EPDM White Fluoroelastomer
Rotor:
Stainless Steel
Coupling Rod:
Stainless Steel
Shaft:
Stainless Steel.
Other Exotic Materials:
Duplex Super Duplex Alloy 20 Haste alloy.
Price Range: Rs. 50,000-Rs. 500,000*
* Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
Roto Xtra Value Progressive Cavity pumps are of heavy-duty construction and are designed to pump â??tough â?? to â?? handleâ?? fluids with ease. These pumps are used in many areas of Industry. The construction of these pumps is based on the modular concepts and incorporates next-generation pumping elements (molded to metal) stator, solid shaft and double sealed Cardan Universal Joints for improved performance and longer service life. These pumps are available in bare shaft and close coupled configuration. 6 and 8 stages in select sizes. A variety of material of construction, shaft sealing options are also available.
Single Stage Pump:
This Heavy-Duty cost effective pumps use the extended Rotor, Stator Geometry and result in lower rubbing velocities which are ideal for the Sewage & Effluent Treatment applications. These Pumps are available in Close-Coupled & Bareshaft Configuration.
Multi-Stage Pump:
These heavy-duty pumps are designed for continuous or intermittent duty and are suitable to perform efficiently even for the most difficult fluid handling applications in wastewater,chemical, and food industries. These pumps are available in bare shaft and close coupled configurations. 6 and 8 stage pumps are also available in select sizes.
Rotor: Tool Steel Case Hardened Steel Alloy Steel Stainless Steel
Coupling Rod: Alloy Steel Stainless Steel
Shaft: Alloy Steel Stainless Steel
Other Exotic Materials: Duplex Super Duplex Alloy 20 Haste alloy
Rotor Surface Coatings: Ceramic Coatings Tungsten Carbide Hard Chrome Plating
Protective Coatings: Rubber Lining Epoxy Coatings
Price Range: Rs. 25000 to Rs. 20 lacs*
* Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
The range of Water Filter Gravel and Support Pebble that we offer, is spherical in shape and allows even distribution in support beds and good flow. It is quite similar to Filter Sand in properties, but the only difference is its shape. These are free from calcium and are very effective in the case of softeners, as this helps in maintaining the quality. Support gravel acts as a support for the filter media and forms the lower levels of the filter bed.
Able Engineering is leading manufacturer of four point centrifuge machine. A centrifuge is the most energy efficient machine that separates solid from liquid.
A centrifuge is the most energy efficient machine that separates solid from liquid. It is widely used in pharmaceuticals plants, Herbal and Solvent Extraction Plants and Chemical Plants.
