Plasma gasification system facilitates safe disposal of all type of organic wastes. The inorganic materials like glass, metals can also be minimized to slag. In plasma pyrolysis the most likely compounds which are produced include carbonaceous matter, methane, carbon monoxide, hydrogen, carbon dioxide and water molecules. These product gases are combustible. These can be either combusted or used as a heating source. The exhaust gases generated on combusting the product gases include CO2, N2, H2O.The product gases recovered has calorific and commercial values. These gases can be used as a heat source or as fuel. The amount of gas recovered depends solely upon type of waste and amount of waste. As the system can recover energy from the waste while safely disposing it, plasma pyrolysis can be treated as the ultimate waste management and recycling technology.
Benefits of PPS:
1. Energy recovery from waste depending upon input waste calorific value.
2. PPS can decompose any type of organic waste negating the requirement of pre processing or treatment.
3. Sterilization of residue
4. The system is compact as compared to other waste disposal facilities.
5. Recovers significant amount of energy in form of combustible gases with safe disposal of waste.
6. It is independent of waste characteristics provided it is organic in nature.
7. PPS facilitates elimination of carbon content in the waste.
8. The ash content does not require any post treatment.
9. Requires less time to preheat the pyrolysis reactor.
10. PPT can even be used to destroy (i) Metallized plastics (ii) Polyethylene plastic (iii) 80%Polyethylene 20% PVC (iv) Soiled plastic, (v) 50% Polyethylene 50% PVC and (vi) Multi-layer plastics in an environment friendly manner
Applicable Fields :
11. Sugar mills(Energy recovery from bagasse)
12. Petrochemical companies and refineries (Tar sand & waste oil).
13. Agro Industries(Energy recovery from agro waste such as groundnut shell, bagasse, Cotton stalk, coffee husk, rice husk, paddy husk etc.)
14. Municipal corporations
15. Trusts collecting floral waste.
16. Hospitals
17. FMCG companies
18. Slaughter houses.
19. Animal waste disposing
20. The plasma pyrolysis systems can be installed in tourist/hilly locations in the country where disposal of plastic bags, metallized pouches, bottles etc. is a matter of concern and significant transportation cost could be saved.
Search for hot air oven laboratory suppliers manufacturers in india
(Laboratory Oven, (MITEC-101)
Temperature range upto 250-450° C, +/- 1 degC controlled by either thermostat or Microprocessor based PID Digital Temperature Indicator -cum - controller. Double wall body with 5 side insulated with high grade glass wool. Inside chamber consists of Aluminium / Stainless Steel, outside comprises of Mild Steel MS body supplied with or without Air circulating fan. Workable on 220/230 V AC or 110-120V.
Inclusive of
Air Circulating Fan
Timer 0-24 hours
Microprocessor based PID Digital Temperature Indicator-cum-controller.
Product code size in mm size in inch capacity in ltr
MITEC-101-1S 300 x 300 x 300 12 x 12 x 12 28
MITEC-101-2S 355 x 355 x 355 14 x 14 x 14 45
MITEC-101-3S 405 x 405 x 405 16 x 16 x 16 65
MITEC-101-4S 455 x 455 x 455 18 x 18 x 18 95
MITEC-101-5S 605 x 455 x 455 24 x 18 x 18 125
MITEC-101-6S 605 x 605 x 605 24 x 24 x 24 224
MITEC-101-7S 910 x 605 x 455 36 x 24 x 18 252
MITEC-101-8S 910 x 605 x 605 36 x 24 x 24 336
MITEC-101-9S 910 x 910 x 910 36 x 36 x 36 730
displayes for laboratory hot air oven suppliers manufacturers
This page is displayed and related to hot air oven manufacturer hot air oven suppliers scientific laboratory lab equipments instruments price stainless steel SS mild steel MS Andaman and Nicobar Islands Port Blair Andhra Pradesh Hyderabad Arunachal Pradesh Itanagar Assam Dispur Bihar Patna Chandigarh Chhattisgarh Raipur Dadra and Nagar Haveli Silvassa Daman and Diu Daman National Capital Territory of Delhi Delhi Goa Panaji Gujarat Gandhinagar Haryana Chandigarh Himachal Pradesh Shimla Jammu and Kashmir Srinagar Jammu Jharkhand Ranchi Karnataka Bengaluru Kerala Thiruvananthapuram Lakshadweep Kavaratti Madhya Pradesh Bhopal Maharashtra wrist action shaker Mumbai Nagpur Manipur Imphal Meghalaya Shillong Mizoram Aizawl Nagaland Kohima Orissa Bhubaneswar Puducherry Pondicherry Punjab Chandigarh Rajasthan Jaipur Sikkim Gangtok Tamil Nadu Chennai Tripura Agartala Uttar Pradesh Lucknow Uttarakhand Dehradun Paschim Bangal Kolkata
Manufacturer & supplier of shaker machine in delhi mumbai assam banglore chennai kolkata and other cities.
Orbital shaker offers features for your applications making it a versatile tool for your laboratory. The bench top orbital shaker is ideal for a variety of applications including cultivating micro organisms, production of basic chemicals, solvents and shaking separation funnels or other types of vessels. The orbital diameter of 35 mm. The triple bearing, brushless drive belt assembly is strong, stable, and quiet even with heavy loads. Shaking platform 18x18 inch, cap, 12 flasks.
Inclusive of 12 flasks, cap 250 ml
Features :
• safe and easy tray fixation
• orbital diameter 35 mm
• speed 50 to 250 rpm
• it can be used for a variety of applications.
• orbital shaker is designed to operate on environmental rooms or laboratory benches for variety of operation.
• platform motion is monitored independently of motor operation for added protection.
• heavy gauge steel housing with epoxy coating ac motor with digital display.
• provides continuous operation even in temperature from 4º c to 40ºc.
• ac motor with programmable drive to control the speed from 50 to 250 rpm
Equipment: brand new, micratech make, model no: mitec-887
Condition: excellent send inquiry at sales [at] micratechnologies com
We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufacturing of TKP Plant Machinery to Convey the Material.The Plant has been configured keeping in mind minimum manual operation. The material will be fed into the pneumatic system and will be conveyed to the reactors. The one hold up hopper (Storage feeder) will help to save the time between two batches.
Raw material Tamarind kernel Powder / seeds is treated with the chemicals as described in the process in the reactor. For effective use of the plant, two reactors are suggested with medium size s those are more convenient and economical to use. To add chemicals, three metering tanks are suggested. To maintain temperature or to increase temperature of the material in the reactor, hot water tank is provided. This hot water tank is equipped with coils to maintain the desired temperature of the water. The reacted mass is sent to the ultrafine grinder. Ultrafine grinder can grind the material with minimum thermal degradation compared to other grinders. Material coming out from the grinder will have high moisture due to addition of moisture in the reaction stage.
The reacted mass is sent to the ultrafine grinder. Ultrafine grinder can grind the material with minimum thermal degradation compared to other grinders. Material coming out from the grinder will have high moisture due to addition of moisture in the reaction stage. The material is dried in the dryer tube by hot air generated by thermal fluid boiler (Mentioned as radiator). From the system hot air will be sent out from dust collectors and the material will be collected in the first cyclone. The dried material is passed through centrifugal screen to confirm correct particle size. Finally material is sent to powder blender, essentially a ribbon blender of about 5 MT capacities. The different batches are to blended and converted into a large batch. The addition of Biocide and any other additives (if required) is carried out in the powder blender.
The product will be packed either by manually or by automatic machine. To run the plant, two skilled and four unskilled workmen are required. One skilled workman at reactor and another to look after other operations of the plant. Two unskilled workmen are required for loading of raw material and remaining two will be required in packing area. Instead of having unskilled workmen, the possibility of having contact labour can be explored.
We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufacturing of Air Classifier Mill for grinding machinery .Air Classifier Mill is used for size reduction in desired particle size. The air classifying mill is screen less. The system consists classifier where the fine particles of desired size are segregated. We have established a note worthy status among the Ultra Air Classifying Mill Manufacturers in India. We bring for the clients Air Classifying Mill of exceptional quality at cost-effective price.
10060 Industrial Machinery Plants Suppliers
Short on time? Let Industrial Machinery Plants sellers contact you.
We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufacturing of Ribbon Blender for mixing machinery.The design of the Reaction blender also makes suitable to dry stage reaction for the application such as starch, gum and cellulose derivatives. We also offer a various range of accessories such as liquid spray system, controlled rate discharge device, jackets to control or to vary the temperature of the mass.
We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufacturing of Ultrafine Pulverizer for grinding machinery .A unique equipment to handle the mass that is most difficult to grind. It gives the desired fineness with a very high capacity and that too at lower power consumption. No special feeding systems such as screw conveyor or rotating valve is required. It pulls the material in, due to high suction of air and throws in high vertical discharge pipeline makes even drying possible with in the same equipment. Less maintenance makes the operation of grinder unstoppable. The equipment is available in vertically mounted or horizontally mounted on tough frame. Various capacities are available.
We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufacturing of Flaker for grinding machinery .Some process need only crushing of the material to meet either to requirement of coarse material or to feed smaller sized material to another grinder. Two hardened rolls rates towards each other. They are kept nearer to each other by means of either mechanical devices or with hydraulic system. This system helps to create the pressure on the rolls and makes the crushing possible. The larger particle of mass, cereals, pulses is pushed between the rolls uniformly spread and with continuous rate through a separate device. A dried feed mass gives material at the bottom with reduced size or if soaked cereals or pulses, give you the material in a flake form. Due to use of roll, Flakers also known as a roll crusher.
We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufacturing of Reaction Blender for mixing equipment .The entire unit is fabricated with engineering precision. Along with the double ribbons that provide to & fro, up & down movement to the powder. Two of chopper blades moving at cutting speed are provided at diagonally opposite sides to break lumps of the mixture. It accurately and rapidly blends small proportions into large stocks. Ribbon blender is also suitable to mix a small quantity of liquids to powder stocks. Offers you dust free operation, compact and excellent appearance. This low operative cost equipment is available with the sizes varying from a tiny lab model to 15000 liter.
We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufacturing of Nauta Mixer for mixing machinery.Nauta Mixer is Ideal mixer to mix various small lots to make uniform one lot or to mix many large proportions of powders to a uniform product. This should be perfect choice. The Nauta mixer offers low operative cost than any other types of mixers. A planetary rotating screw near the wall of cone not only mixes the powders but also breaks the lumps. A silent equipment offers you trouble free operation. The sizes of Nauta mixer available are 500 liters to 20000 liters.
