Appearance Pale yellow clear viscous liquid. Solids 35 % +/- 1 Sodium Chloride 6 % max. pH (5% aqueous solution in D.W.) 5.5 to 7.5 Applications: - It is used mainly for shampoo as conditioner
Carbon Chain Distribution by GLC (%) C14 C16 C18 1.0 max. 99.0 min. 1.0 max. Appearance Fused / Flakes Hydrocarbons (% by wt) 0.5 max. Moisture (% by wt) 0.10 max. (Fused) 0.15 max. (Flakes) Acid Value 0.05 max. Saponification Value 0.20 max. Iodine Value 0.20 max. Avg. Molecular Weight 238 - 246 Hydroxyl Value 227 - 235 Solidification Range (C) 47 - 50 Flash Point (C) Ca 175 Density (gms/cc) @ 60C 0.805 - 0.815 Colour (apha) 10 max. Boiling Range (C) 305 - 320 Carbonyl Value (as ppm CO) 50 max.
Carbon Chain Distribution by GLC (%) C12 C14 C16 C18 0.2 max. 1.0 max. 98.0 min. 2.0 max. Appearance Fused / Flakes Hydrocarbons (% by wt) 0.7 max. Moisture (% by wt) 0.10 max. (Fused) 0.15 max. (Flakes) Acid Value 0.05 max. Saponification Value 0.20 max. Iodine Value 0.20 max. Avg. Molecular Weight 238 - 246 Hydroxyl Value 228 - 235 Solidification Range (C) 47 - 50 Flash Point (C) Ca 175 Density (gms/cc) @ 60C 0.805 - 0.815 Colour (apha) 10 max. Boiling Range (C) 305 - 325
Carbon Chain Distribution by GLC (%) C12 C14 C16 C18 0.2 max. 2.0 max. 95.0 min. Appearance Fused / Flakes Hydrocarbons (% by wt) 0.7 max. Moisture (% by wt) 0.10 max. (Fused) 0.15 max. (Flakes) Acid Value 0.10 max. Saponification Value 0.20 max. Iodine Value 0.20 max. Avg. Molecular Weight 238 - 249 Hydroxyl Value 225 - 235 Solidification Range (C) 46 - 49 Flash Point (C) Ca 180 Density (gms/cc) @ 60C 0.805 - 0.815 Colour (apha) 10 max. Boiling Range (C) 305 - 330
INTRODUCTION The product is a high molecular 30 TBN Calcium Sulphonate. The increased oil solubility of the organic portion of this Sulphonate enables the product to provide rust protection and acts as a dispersant for graphite and molybdenum disulfide. It can be used as an additive in lubricating oils, greases, rust inhibition, antiwear and hydraulic fluids. SPECIFICATION Test Method Minimum Maximum Appearance Visual Brown liquid Brown liquid Colour ASTM D 1500 2 5 Sp. Gravity @ 15.6 C ASTM D 1298 0.95 1.05 Flash Point C (COC) ASTM D 92 175 - Viscosity @ 100 C, cst ASTM D 445 40 70 Avg. Molecular wt. ASTM D 3712 1000 1100 TBN (mg KOH/gm) ASTM D 974 28 35 Calcium Content %[w/w] GL EDTA 1A 2.8 3.0 FORMULATION The product is recommended for use at 0.5% to10.0%wt. In suitable base stocks to provide detergency & anti-rust performance characteristics to oils. It is compatible with mineral base oils, white oils, and synthetic base stocks. APPLICATION Imparts excellent rust prevention, detergency and Anti oxidant Properties. Corrosion inhibitor in mill oils, short-term rust preventatives, coatings and greases. Dispersant and corrosion inhibitor in engine oil. Provides excellent resistance to coated Cold Rolled Steel for antirust applications. Works in extremely hostile conditions like highly acidic environment as well as highly humid atmosphere. It is non-staining having detergent, dispersant properties. Environmental Friendly, Biodegradable without side effect. HANDLING AND STORAGE Calcium Sulphonate is normally handled at room temperature. For general purposes, the following storage and handling temperatures are recommended: Storage Handling 50-70C (122-158F). For more extensive information on the safe handling and use of this product, see the Material Safety Data
D G EXIM is one of the leading suppliers of Industrial Chemicals Acetic Acid Glacial Activated Carbon Aluminium Sulphate Magnesium Sulphate Aluminium Sulphate Ammonium Chloride Ammonium Sulphate Borax Decahydrate Borax Anhydrous Boric Acid Butyl Glycol Ether Calcium Chloride Caustic Soda Flakes / Pearls Citric Acid Gum Rosin Hydrogen Peroxide 50% Sodium Metabisulphite f.g Iso Cyanuric Acid Iso Propyl Alcohol Lactic Acid Methylene Chloride Mono Ethylene Glycol Mono Propylene Glycol Nonyl Phenyl Ethoxalates â?? np9 Oleic Acid Potassium Chloride Potassium Hydroxide Flakes Potassium Nitrate Sodium Formate Sodium Gluconate Sodium Hexametaphosphate Sodium Hydroxide Pearl/Flake Sodium Metasilicate Xanthan Gum Sodium Molybdate Sodium Tripolyphosphate Tetra Potassium Pyrophosphate Tetra Sodium Pyrophosphate Triethanolamine 85% Zinc Sulphate Calcium Chloride Edta Glycerine Guar Gum Mineral Oil Light / Heavy Phosphoric Acid 85% Soda Ash Dense/Light Sodium Benzoate Sodium Bicarbonate Sodium Carboxy Methyl Cellulose (CMC)
Solvents Biocide Sodium Hexametaphosphate Calcium Carbonates Styrene Acrylic Emulsion Defoamer Hydrocarbon Resin Dolomites Viscosity Modifiers Kaolin Titanium Dioxide
1. ashwagandha extract 1.5% 2. zingiber officinale 2.5% 3. glycine powder 4. black seed oil 5. flax seed oil 6. castor oil (clear) 7. black pepper extract 95% 8. curcumin 95% 9. aloe vera 200x 10.. potassium sorbate 11. propylene glycol.
En 590 10 ppm diesel, jet fuel a1, and crude oil, sugar, sulfur, sulphur.Fuel brokerage service
Crude Oils All types of Diesel Oils & Lubricants, Bitumen, Sulphur, Special Kerosene, by products from refineries etc.
Industrial chemicals likes tetra sulpho optical brightener and di sulpho optical brighteners for pulp and paper, caustic soda flakes / sodium hydroxide, caustic soda lye, asa sizing agent, akd sizing agent, wet strength resin agent / dry strength resin (polyamido polyamine epichlorohydrin resin with a high% of solids 25 35%), sae anionic for sizing agent (butyl acrylate styrene polymer 24 26%), sae cationic for sizing agent (copolymer n [3 (dimethylamino) propyl] methacrylamide / styrene ]]) for paper industry, fluorescent brightening agents, optical brighteners for paper, fluorescent whitening agents, optical brightener, carbomer, carbopol, polyaluminium chloride, carbon brushes and brush holders, pp granules, plastic granules and many more..
Calcium Bromide, Hydrobromic Acid, Bromobenzene, 1,4 dibromobutane, 1 Bromo 3 chloro propane, Iso propyl bromide, allyl bromide, n butyl bromide, 2 bromo butane, n octyl bromide, bromine derivatives, pesticides intermediates, agrochemicals intermediates,, drilling chemicals, cosmetic chemicals, magnesium carbonate
Ethyl Hexyl Acrylate CAS Number 103-11-7 Formula C11H20O 2-Ethylhexyl acrylate belongs to the acrylates. It appears as a clear colorless liquid with a pleasant odor. It is less dense than water and insoluble in water. and the vapors are heavier than air. With a flash point 180�°F. it is used in making of paints and plastics. SPECIFICATION Color 5 APHA Purity 99.9 wt % Water 0.01 wt % Acidity (as Acrylic acid) 0.002 wt % Inhibitor (MEHQ) 75 ppm MAJOR USE: As a plasticizing co-monomer, 2-ethylhexyl acrylate is used in the production of resins for pressure-sensitive adhesives, latex, paints, textile and leather finishes and coatings for paper. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
N Propanol CAS Number 71-23-8 Formula C3H8O Normal propanol is a primary alcohol with a molecular formula of C3H8O. It is a colorless, transparent liquid that has a typical sharp musty odor that is comparable with the smell of rubbing alcohol. The product is fully miscible in water and freely miscible with all common solvents such as glycols, ketones, alcohols, aldehydes, ethers and aliphatic hydrocarbons. SPECIFICATION Purity 99.89 wt% Water Content 0.02 wt% Color 5 APHA Specific gravity (20/20�°C) 0.8050 Acidity as Acetic Acid 0.0010 Distillation range at 760mmHg 96.8-97.1 Non-Volatile Matter (g/100mL) 0.001 Appearance Free from insoluble and haze MAJOR USE: N-propanol is used as a solvent in the manufacturing of pharmaceuticals, polishes, dental lotions, coatings, lacquers, printing inks, natural gums, pigments, intermediates, dye solutions, antifreeze, fuel additives, paint additives and de-greasing fluids. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Tetrahydrofuran (THF) CAS Number 109-99-9 Formula C4H8O or (CH2)3CH2O Tetrahydrofuran (THF) is a clear, colourless, volatile, and water-miscible liquid. It has low viscosity at standard temperature and has the formula C4H8O. It has smell similar to diethyl ether and is one of the most polar ethers. SPECIFICATION Appearance Clear Liquid Purity 99.993 wt % Color < 5 APHA Moisture 52 ppm Peroxides 8 ppm Specific Gravity (20/4�°C) 0.88746 Refractive Index 1.4071 MAJOR USE: As a solvent for special resins such as photosensitive resins, because even at room temperature it can dissolve various resins, and it is miscible with water and most organic solvents. In, addition, it is used as a solvent for Grignard and Wittig reactions. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Melamine CAS Number 108-78-1 Formula C3H6N6 or C3N3(NH2)3 Melamine is an organic base and a trimer of cyanamide, with a 1, 3, 5-triazine skeleton having formula C3N3(NH2)3. This white powder contains 66% nitrogen by mass and, if mixed with resins, has fire retardant properties due to its release of nitrogen gas when burned or charred, and has several other industrial uses. SPECIFICATION Purity Min. 99.8 % wt Water Max. 0.1% wt Color Max. 20 APHA Ash Max. 0.03% wt MAJOR USE: In making thermosetting plastics, ire-retardant additives in paints, plastics, and paper. A melamine fibre, Basofil, has low thermal conductivity, excellent flame resistance and is self-extinguishing; this makes it useful for flame-resistant protective clothing, either alone or as a blend with other fibres.
Maleic Anhydride CAS Number 108-31-6 Formula C4H2O3 Maleic anhydride is an organic compound with the formula C4H2O3. Maleic anhydride is a cyclic dicarboxylic anhydride. It is a colorless or white solid with an acrid odor. Maleic anhydride is produced by oxidation of benzene or a C4 hydrocarbon such as butane in the presence of a vanadium oxide catalyst. SPECIFICATION Appearance White Briquettes Purity 99.96 wt% Molten Color 10 APHA Molten Color After Heating 14 APHA Solidification Point 52.6 C Ash Content 4.99 ppm Iron Content 0.47 ppm MAJOR USE: Maleic anhydride has a very broad range of uses from food additives to industrial applications. synthetic resin raw material (unsaturated polyesters), paints and coatings., resin modifiers., vinyl chloride stabilizers., food additives (fumaric acid, succinic acid, malic acid), agricultural chemicals, paper sizing agents, imides. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Ethyl Acylate CAS Number 140-88-5 Formula C5H8O2 Ethyl acrylate is an acrylate monomer with a molecular formula of C5H8O2. It is a clear and volatile liquid which is slightly soluble in water and completely soluble in alcohols, ethers and almost all organic solvents. It is a very flammable liquid and has a sharp acrid odour. SPECIFICATION Colour 5 APHA Purity 99.9 wt% Water 0.01 wt% Acidity (as Acrylic acid) 0.000 wt% Inhibitor (MEHQ) 50 ppm MAJOR USE: As a raw material for fiber processing agents, adhesives, coatings, plastics, acrylic rubber, and in the production of emulsion-base polymers. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Ethyl Acetate CAS Number 141-78- Formula 6 C4H8O2 or CH3COOC2H5 Ethyl acetate is the acetate ester formed between acetic acid and ethanol with a molecular formula of C4H8O2. It is a colourless liquid with a fruity characteristic odour that is commonly recognized in glues and nail polish remover. This product is highly flammable and it is miscible with all common organic solvents (alcohols, ketones, glycols, esters) but only slightly miscibility in water. SPECIFICATION Water 120 mg/kg Acidity (as Acetic Acid) 21 mg/kg Platinum Cobalt Color 5 Relative Density at 20/20�°C 0.9021 Distillation Range of Volatile Organic Liquid - Initial Boiling Point 76.9 �°C Dry Point 77.5 �°C Distillation Range 0.6 �°C Non-Volatile Matter < 1 mg/100mL Residual Odor Non-Residual Alcohol Content and Purity of Acetate Esters by GC - Ethanol 100 mg/kg Ethyl Acetate 99.94 %(m/m) MAJOR USE: Ethyl acetate is a widely used solvent, especially for paints, varnishes, lacquers, cleaning mixtures, and perfumes. Like last week's MOTW, dichloromethane, it is used as a solvent for decaffeinating coffee beans. In the lab, ethyl acetate is a common solvent for column and thin-layer. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Acrylic Acid CAS Number 79-10-7 Formula C3H4O2 Acrylic acid is an organic compound with the formula CH2=CHCOOH. It is the simplest unsaturated carboxylic acid, consisting of a vinyl group connected directly to a carboxylic acid. Acrylic acid is a clear and colorless liquid with a distinctive acrid (tart) odor. It is miscible with water, alcohols and ethers. SPECIFICATION Purity 99.9 wt% MQ 208 ppm Acrylic Acid Dimer 0.02 wt% Water Content 0.12 wt% Colour 5 Appearance Clear MAJOR USE: In the production of acrylic esters and resins, which are used primarily in coatings and adhesives. It is also used in oil treatment chemicals, detergent intermediates, water treatment chemicals, and water absorbent polyacrylic acid polymers. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
