Indian Industrial And Automotive Suppliers and Manufacturers

Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements

Our Powder activated carbon is manufactured using pure pine wood which is an excellent base for manufacturing activated carbons with good adsorption power. The steam activated process is done by activating the charcoal in a rotary kiln by heating at high temperatures by steam. The activated carbon that comes out from the kiln is called unwashed activated carbon. These unwashed activated carbon has higher ash and iron content. This is reduced by washing the unwashed activated carbon with acid (HCl / H2SO4) and purified water. This results in reduction of ash content to as low as 1% and iron as low as 50 ppm. The gradation of different qualities of activated carbon is done on the basis of Methylene blue value and iodine value. The iodine value is a better test as the particle size of iodine molecule is small enough to penetrate the smallest of pores. We can relate the iodine value of activated carbon directly to its surface area because of the above fact.

Sulphuric Acid Min 98%

Price - Rs 1,400/ Kg Product Specification Usage/Application : Pharma Form : Crystal Packaging Size ; As per client requirement Brand : NT Botanical Name : Mint Leaves Country of Origin : Made in India Product Description Natural Menthol Crystals offered are used in most of the industries including in pharmaceutical, Food and in varied flavoring applications. These menthol crystals are also known by name of chemical name of 1-Methyl-4-Isopropyl Cyclohexane 3 and are colorless crystals with refreshing mint color. With solubility in Alcohol and slightly in water, these have cool sensation in mouth and are made by fractional distillation of menthol oil. Here, the distillation process yields pure menthol as fraction which is slowly cooled and then crystallized. The chilling is done that helps in separation of menthol. Having a characteristic odor of natural menthol as obtained from mentha avensis oil, some of the end usage areas of these natural menthol crystals include in food, toothpastes and cosmetics. Menthol crystal Supplier from india Additional Information Item Code : MT01 Delivery Time : 5-7 Days Production Capacity : 10 ton Packaging Details : 25 kg Drum

We are the leading Manufacturer of Natural Iron Oxide Powder in India. Our product have various applications in Oil & Gas as weighting agent (Hematite API) & as Cementing Grade, in manufacturing Fertilizers, in Paint Industries and also in Glass industries. Hematite Powder is a mineral, colored black to steel or silver-gray, brown to reddish brown, or red. It is mined as the main ore of iron. Hematite, is the mineral form of iron(III) oxide (Fe2O3), one of several iron oxides.

Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements

Wood Based Powder Activated Carbon is used for decolorizing in sugar liquors, juices,soybean and food industries. Wood powder activated carbon is non-toxic, without taste and it has the appearance of a fine black powder. Mb Value : 140 to 320 Ash:7 to 12%

Coal based activated carbon originates from coal that has undergone a steam activation process Coal based carbon has mainly mesopores and macropores and is very popular in gas phase purification portable water purification wastewater purification and aquariumpond water purification applications The carbonaceous product of wood Applications Gas phase purification Water purification system

Coconut shell activated carbon is derived from coconut shells. It has a very high hardness and is more abrasion resistant than any other type. It is a totally natural, environmentally friendly product that has a very small carbon foot print. The carbonaceous product of coconut. Applications â?? Portable water purification Wastewater purification Gold absorption from gold solution Medical use

These Organic pigments find wide application in plastics, paints, liquid inks, textiles, rubber, cosmetics, artist colors etc. They have excellent dispertion and ethology characteristics required for painting link requirements with good transparency,gloss and tone. These pigments are homogeneous belonging to Azo or Phthalocyanine groups. The physical, chemical, coloristic as well as fastness properties of the pigments depend to a large extent on the type of binders used, presence of driers, hardness, the substrate and film thickness etc.

Specification: Form : Kibble (2cm-5cm) (May change as per need) Appearance : White cream pH value(0.5:10) : Min. 2.8 Solubility : Completely soluble in hot water. Al as Al2O3 :Min. 17 % Insoluble matter : Max. 0.8 % (In water) Iron content as Fe:Below 50 ppm

Specifications: Magnesium as MgSO4.7H2O : 99.08% Magnesium as Mg : 9.6% Magnesium as MgO : 16.04% Sulphur as S : 12.10% Ph : 6-7.5 Solubility : Very soluble in water

Appearance Colourless to light yellow liquid Colour 3G Max Average Molecular Weight (Avg Mw) Approx. 360 Solid Content % - 35-38% Active Matter % - 38-32% Ph 10% Solution 5-7 Chloride As (NaCl) 7% max Free Amido amine 0.5 % Max Density at 20’C (G/cm3) Approx. 1.05

Appearance - pale yellow translucent paste Odour - no strange smell Ethylene oxide moles - 2 Mean molecular weight - 386 Active matter - 68 ± 2.0 Free oil (%) - max. 2.00 Sodium chloride (%) - max. 1.5 Sodium sulphate (%) - max. 1.5 Free alkalinity (%) - max. 0.5 Colour (klett, 5% am basis) - max. 30

Appearance Honey Brown Viscous Liquid Active Matter % w/w Mol.Wt320 – 96 ± 1 NDOM% w/w 1.5 ± 0.5 Free Acid asH2So4 1.5 ± 0.5 Color 10%aq.soln. 80 Klett max

AppearanceClear colourless liquid Assay (As CaBr2 by titration)> 52% w/w Specific gravity (25°C)> 1.70 gm/ml or 14.2 lb/gal Chlorides (C1-)< 0.30% w/w Sulphates (504-2)< 0.1% w/w Heavy Metals< 10 PPM pH 5% solution @25°C6.5 to 8.5 Water Insoluble< 0.30% (by Gravimetric) Crystallization pointbelow -7°C (20°C)