Whetlerite carbons are Cu, Cr and Ag impregnated activated carbons used for respiratory protection against super toxic nerve, blister, blood and choking agents in the military. Whetlerite carbons are used in nuclear, biological and chemical (NBC) filters for collective protection, and in NBC canisters, as part of individual gas masks, for personal protection. Flexus Global exports impregnation of active carbon and whetlerite carbon to various countries.
Exhaust gases from several industrial and production units where coal or sulfide ores are used, contain sulfur-containing toxic gases and vapors such as sulfur dioxide, hydrogen sulfide, carbon disulfide, and several organosulfur compounds. These industrial gases need to be desulfurized effectively before mixing with the environment. Sulfur can also be removed with the use of activated carbons. Flexus Global speciality activated carbons are promising adsorbents for SO2 and sulfur-containing toxic gas removal due to their high efficiency and regenerative capacity.
Formaldehyde and other aldehydes are the main pollutants in indoor air. Formaldehydes are mainly obtained from paint, polymerizing plates, bindings, chemical fibers and even cigarette smoke Activated carbon adsorbents are the most promising adsorbents when adsorption of traces of gases and vapors is concerned. Our impregnated activated carbons offer effective chemisorption of formaldehyde from air.
Carbon monoxide (CO) is a very toxic gas with TLV of 35 ppm and it is to be removed from the air in mines, enclosed spaces, fire breaking places. Active carbon can not hold the CO due to physisorption and therefore palladium impregnated carbon was developed which became even more active due to high RH. This again one of the very specialized carbon exported by us for air purification and CO removal. It almost works like the turn over catalyst and offers very high protection against CO. This carbon has High Surface area providing almost offers endless protection against CO, Works in any RH but becomes more active at high RH.
Activated carbon has very high capacity to adsorb organics, inorganics, bad taste and odour material. Adsorption capacity is enhance by modifications such as acid washing because this modification removes the acid soluble inorganic materials from the carbon and make it more porous, efficient and useful for various liquid process applications such as waste water treatment, water purification, decolourisation process in chemical and pharmaceutical industries, food and beverage industry for many purposes such as decolourization of sugar, dechlorination, decaffeination, purification of organic compounds, etc. Some of the benefits of Acid Wash carbon include Dechlorination of water, better taste, removal of bad odors, removal of color from water, removal of organic substances, etc. Available in different mess Size as per customer requirement.
Among its numerous sources, coconut shells have gained significant attention as a sustainable and efficient raw material for producing high-quality activated carbon. Coconut shell-based steam-activated Carbon is mainly used for the removal of chlorine, organic contaminants, color and odor from drinking water to make it suitable for human consumption. Being microporous in internal structure, coconut shell activated carbon is well suited for organic chemical adsorption, including volatile organic chemicals. - One of the prominent applications of coconut shell-based activated carbon is in water treatment processes. It effectively removes impurities, organic contaminants, and heavy metals, ensuring clean and safe drinking water. - It acts as a decolorizing agent, removing impurities and unwanted odors from edible oils, beverages, and food products finding its application in the food and beverage industry. Additionally, it is employed in the purification of sugar syrups, ensuring high-quality and clear syrup for various confectionery and beverage manufacturing processes. - It serves as an excellent adsorbent in the production of drugs, where it eliminates unwanted impurities, colorants, and traces of heavy metals making it ideal choice in pharmaceutical industry too. The high purity and porosity of coconut shell-based activated carbon make it a preferred choice for pharmaceutical manufacturers to ensure product quality and safety.
(Color Taste Odor Removal) - We are leading exporter of Activated Carbon Blocks, made from high Surface Area, low ash coconut based Activated Carbon with high adsorption efficiency and contaminant removal capacity. The CTO Blcks have high adsorptive capacity that simultaneously removes chlorine, bad taste, odor and organic chemicals that contribute to bad taste. They are suitable for use as Pre and Post Reverse Osmosis Systems in CTO BLOCKS (Color Taste Odor Removal) residential and commercial water purification. Size & Diameter can be customised as per buyer's requirement.
CHM REMOVAL BLOCK (Heavy Metal Removal) - Heavy metal (HM) is any metallic chemical element are highly toxic for both animals and human beings, and can be bio-accumulated through biological chains and are non-biodegradable and persistent. Their toxicity may occur due to industrial emission that contaminates waterways, nearby streams and rivers, contamination of irrigation water, the application of fertilizer and metal-based pesticides, harvesting process, transportation, storage, or sale. Elements, such as Cadmium and Chromium, are considered carcinogenic, while Iron, Copper, Manganese, Zinc, and Nickel are considered essential trace elements. Arsenic is also another heavy metal which is available in almost 70% bore well water. Therefore, it is essential to purify the water to make it potable. The conventional methods for heavy metal removal from waste water which includes chemical precipitation, reverse osmosis, and solvent extraction are expensive. Adsorption on adsorbent such as active carbon or modified active carbon is an alternative method, because it is cost effective and simple to design. Size & Diameter can be customised as per buyer's requirement.
One of the main applications of granular activated carbon is the purification of water. Its function is the retention of organic contaminants and the elimination, by chemical reaction, of the free residual chlorine that remains in the water after the disinfection stage. In order to inhibit bacterial growth, the surface of the carbon is impregnated with 0.1% metallic silver to make carbon bacteriostatic using ionic silver to enable it to bind strongly with carbon surface to make it suitable to function and purify large volumes of water. - High efficiency - Negligible silver leaching - No health hazards to humans - No loss in Bacteriostatic property up to 6000 litres water - Available in Granular and block form
To suit the requirements of water purification, modern approach is to filtering huge volumes of water contaminated with many organic and inorganic contaminants but in form of blocks along with reverse osmosis, UV irradiation, mineral addition, etc. Carbon blocks are engineered and manufactured using compression molding or extrusion for different applications such as dechlorination, bad taste and odour removal, chloramines and organic materials removal, VOC removal, heavy metal removal, etc. Carbon blocks provide effective and versatile filtration for a wide range of different applications such as sediment and chemical removal. - Manufactured from coconut shell based low ash, micro porous Activated Carbon. - Designed to be used in most standard size housings. - High adsorptive capacity & high Iron, HMR & VOC removal Capacity - Simultaneously removes chlorine, bad taste, odour and organic contaminants from water. - Provides particular filtration and high dirt capacity. Size & Diameter can be customised as per the Buyers requirements
Impregnated activated carbons assist with removal of odorous sulphur compounds in sewage pumping stations, personal protection respirators, and removal of corrosive gases from air intake systems specifically in electronics manufacturing facilities, museums etc.
Flexus Global provides filter media which protect against acid gases and alkaline species such as ammonia gases and its derivatives from air and gas streams. Available in Different Mesh Sizes as per Buyer's Requirement.
Mercury and its compounds are cumulative toxins that are harmful even when taken in very small amounts. Itâ??s unique properties allow widespread applications across the paper and pulp industry, chemical processors, & other various manufacturers. Activated carbons are an excellent solution to control the widespread discharge of elemental mercury and its salts. Flexus Global provides Specially designed Carbon to treat a variety of flue gas compositions, high adsorption capacity for many pollutants with exceptional mercury removal rates and low carbon usage. Most commonly used adsorbents for removal of pollutants and treatment of wastewater. Available in Different Mesh Sizes.
IRON REMOVAL BLOCK - Iron is one of the major problem in ground water of many areas in India. Excessive levels of iron above 0.3 mg/l in water, may lead to many problems in usage and also adverse health effects. Iron will be in the form of Fe2+, Fe3+ and as few more other compounds in dissolved state in water. Iron imparts color in water if it is excessive, which leads to aesthetic effects in water. If it is used for laundry application, affects the color of the white fabric. Size & Diameter can be customised as per buyer's requirement.
VOC REMOVAL BLOCK - Activated Carbon filters effectively Removes Volatile organic compounds (VOC) from water causing irritation in the eyes, nose, and throat, headaches, loss of coordination, and nausea. RO does not provide the adequate removal of VOCs. The adsorption properties of the activated carbon filter suit to remove the carbon-based VOC. No better defense mechanism against VOCs is offered than carbon as active carbon based on coconut shell is microporous and micropores can only house them suitably. To enhance the adsorption capacity of active carbon block we provide modified active carbon with nano alumina. These VOCs Blocks can be manufactured in different size for different applications. Size & Diameter can be customised as per buyer's requirement.
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brightener Available for Paper application like... Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%
BrightOmni UP is a Disulpho type Fluorescent Whitening Agent with high affinity for Paper in wet end applications to achieve high whiteness and brightness properties of Paper. It Can be added either batch wise in the mixing chest or continuously at suitable dosing points in the stock preparation system. It Should be applied prior to either alum or cationic auxiliaries. Typical average dosage is 2 - 6 kg/Ton of dry pulp depending on: - Type of furnish - Base pulp pH and brightness - Desired brightness and whiteness gain
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brightener Available for Paper application like... Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brightener Available for Paper application like... Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%
Areca leaf plate, chia seeds, paper cup, black coffee, copper flat, copper rod, cumin seeds, cashew nut, red chili, black pepper, garlic powder, mint powder, moringa leaf powder, ginger powder, coconut oil, gemstone, paper boxes, paper plate, office files, white board, study table, saffron, leather bag, leather shoes, turmeric finger, digital thermometer, packaged drinking water bottles, white sugar, polyester film, menstrual cup, herbal tea, amla powder.We are a merchant exporter dealing with the worldwide market and having bunch of satisfied clients with the product quality as per their needs
