As the name suggests, these vials are commonly used for storage of biological material, human & animal cells. The Cap is provided with a built in seal ring making the vial leakproof. The base of the vial has longitudinal grooves which give it a non-twisting character when placed in a vial rack.
Product Information:
These polypropylene/polystyrene tubes are generally used in RIA, Coagulation & bacteriology. The polypropylene tubes are clear and can withstand 3000 RCF during centrifugation while the transparent polystyrene tubes can withstand 1400 RCF. The PP tubes can accept common acids, alkalies & solvents at room temperature while the PS tubes can accept mild bases, weak acids but not organic solvents.
Product Information
Moulded in Polypropylene, the top of the box is attached to the bottom through well designed built-in hinges. The bottom has built-in spaces to hold vials up to 2ml. capacity. Available in two different sizes, these autoclavable boxes bear alpha numeric index for easy identification of different vials placed inside.
Product Information:
Code
Particulars
Packing
183-A
25 places for 1ml or 1.8 ml Cryo Vials
8pcs
183-B
50 places for 1ml or 1.8ml Cryo Vials
8pcs
183-C
81 places for 1ml or 1.8ml Cryo Vials
4� Pcs
ESAW Cryo Rack is moulded in Polycarbonate making it tough, durable & autoclavable. This handy rack can hold 50 vials ata time. The unique feature of this rack is that vials can be unscrewed without actually picking them up as the vial will lock in every well and hence will not twist. This rack is provided with four anti skid rubbers & each well is identified with an alpha-numeric index.
Product Information
Code
Particulars
Packing
181
50 places for 1,1.8 & 4.5 ml Cryo Vials
100 pcs
These Coders available in different colours can easily fit into the cap of cryo vials for colour identification of different samples.
Product Information:
Code
Particulars
Packing
180
Cryo Coders
100 pcs
10637 Glass Glass Products Suppliers
Short on time? Let Glass Glass Products sellers contact you.
Cryo vials are normally used for storage of Biological material, human & animal cells. These sterilized tubes are provided with white, prominent graduations and a long marking area for sample identification. The cap of these vials is provided with a seal ring inside to make it completely leakproof. The longitudonal grooves in the base give a non-twisting feature to these vials when placed in a cryo rack.
Product Information:
These racks can conveniently hold inverted tubes for drying purpose and minimizes collection of airborne contaminants inside the tube. This rack can also be used to hold and dry electrophoresis and chromatography plates
Product Information:
These non-corrosiv moulded Retort Stands provide excellent replacement for the metal ones, Even the metallic rod has a polypropylene covering making it non-corrosive. The rod measuring 12.5 mm x 750 mm can be screwed into the heavy base giving way to a perfectly stable Retort Stand.
Product Information:
ESAW Draining Rack provides an excellent option for post wash draining of tubes & bottles in the laboratory. The back plate has 20 holes into which pegs are tightened with the help of screw-nuts. Bottom of the rack is provided with a tray which collects all the waste water drained down which can further be collected in a container via drain tube. This rack does not rot, stain or rust.
Product Information:
An economical substitute for wire racks, here are these submersible, autoclavable racks which are stackable when empty. These are available in different colours and are made of a special blend of Polypropylene that makes it sink in a water bath and maintain their stability even in agitated water. These space saving racks can easily be disassembled for cleaning purposes. The base is in the form of a grid with square openings and has fold up sides and end bars that lock into rack tops.
Product Information:
These Racks for Scintillation Vials, moulded in Polypropylene, are autoclavable & corrosion resistant. There is an individual rack for both 8 ml. & 20 ml. vials. These rugged & stable racks can hold scintillation vials for convenient storage, handling & sample preparations.
Product Information:
Code
Particulars
Packing
178-A
Rack for 90 vials of 8 ml. capacity
2� Pcs
Moulded in Polypropylene, this flask stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at every point of contact. This flask stand can hold round bottom flasks up to 10 Ltr. Capacity. This stackable flask stand can also be steam autoclaved.
Product Information:
These Clamps are moulded in Polypropylene making it completely corrosion-proof. The spring loaded jack in the middle provides a vice like grip to the Burette and prevents it from slipping. Two tapered wedges are provided to ensure firm grip on rods having dia 1/2\" or 3/8\".
Product Information:
These handy jugs, moulded in Polypropylene, are clear, autoclavable and have good chemical resistance. These jugs are provided with a handle for easy & convenient lifting and have raised graduations for easy reading.
Product Information:
ESAW Volumetric Flasks, blown in Polypropylene, are strong unbreakable and have good contact clarity. These autoclavable flasks are provided with screw caps to prevent leakage.
Product Information:
This Burette has a transparent acrylic pipe and a leakproof TPX stopcock fitted with a self lubricating PTFE plug. Each Burette is individually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute mineral acids & bases except Hydrofloric Acid & Ammonium Hydroxide. The pH range of 1-14 is ideal and can be used up to 5% wt/wt of acids or 30% bases.
Product Information:
ESAW Beakers, moulded in Polypropylene have excellent clarity and very good chemical resistance. These autoclavable Beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient because of its tapered spout.
Product Information:
Designed specifically for analytical chemistry, the body of the funnels is 60. Moulded in PP, these funnels are provided with internal & external ribs to prevent air blockage.
Product Information:
Made of Polypropylene, these corrosion free funnel holders can hold funnels with dia 3" to 6". The extra plate provided can be placed to hold funnels bearing dia 1" to 3". Two tapered wedges are provided to ensure firm grip on Rods having dia 1/2" or 3/8".
10637 Glass Glass Products Suppliers
Short on time? Let Glass Glass Products sellers contact you.
