This, in fact, is a multipurpose apparatus which works as a stirrer as well spatula. The fattened ends of this rod form two small spatulas
Product Information:
Made of polypropylene, these Stirrers are very useful for stirring different solutions in the laboratory. These Stirrers prove to be tough and long lasting.
Product Information
Moulded in Polypropylene, Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge. This edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers.
Product Information:
Code
Particulars
Packing
This transparent polypropylene cap for Test Tubes proves to be an excellent protection to the contents to the tubes. The grooves inside the cap tighten the fittin gon the tube while the outer grooves would hold identification labels. The built in seal ring would set in the tube making the combination a leakproof one.
Product Information:
ESAW Kipp\'s Apparatus made of Polypropylene has three main portions. The top portion is fitted with a thistle funnel and a bulb structure through which dilute acid can be poured which reacts with a metal sulphide in the base of the Apparatus. H2S gas then evolved collects in the middle dome from where it can be released through a leakproof stopcock fitted with a self lubricating PTFE plug. The base is provided with a residual outlet fitted with a cap for easy cleaning.
Product Information:
Code
Particulars
Packing
138-A
250 ml
1� Pc
138-B
500 ml
1pc
138-C
1000 ml
1pc
10526 Glass Glass Products Suppliers
Short on time? Let Glass Glass Products sellers contact you.
Plain Desiccators are physically the same as Vaccum Desiccator. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight.
Product Information:
ESAW Desiccators are made of Polypropylene and Polycarbonate. These autoclavable vaccum desiccators can hold vaccum upto 740 mm of Hg for 24 hrs. without any greasing. The top dome, moulded in rigid and transparent Polycarbonate, gives a crystal clear view of the desiccant placed inside. The Knurled knob on the top provides easy handling of the dome. The lower part is made of Polypropylene. An internal groove is provided on the flange to hold a silicon rubber O-Ring. The Polypropylene stopcock is fitted with a self lubricating PTFE plug. This plug works three way i.e. vaccum creation, shutting off & vaccum releasing.
Product Information:
This Float Rack moulded in Polypropylene is quite compact, autoclavable and can hold 16 micro centrifuge tubes for incubation in water baths. Easy to load, these are essential in microbiology & immunology labs. The surface of the rack has raised alpha-numeric index for easy identification and has a central rod handle for convenient lifting.
Product Information:
These polypropylene vials add to the existing range of ESAW storage vials. Available in 5 ml. & 10 ml. capacities, these vials have polypropylene cap with built in seal ring making it a leakproof vial.
These unbreakable vials, moulded in Polyethylene, are fitted with leakproof screw caps. These vials can be used with standard counting equipment for liquid scintillation system and are excellent for low activity count.
Product Information:
As the name suggests, these vials are commonly used for storage of biological material, human & animal cells. The Cap is provided with a built in seal ring making the vial leakproof. The base of the vial has longitudinal grooves which give it a non-twisting character when placed in a vial rack.
Product Information:
These polypropylene/polystyrene tubes are generally used in RIA, Coagulation & bacteriology. The polypropylene tubes are clear and can withstand 3000 RCF during centrifugation while the transparent polystyrene tubes can withstand 1400 RCF. The PP tubes can accept common acids, alkalies & solvents at room temperature while the PS tubes can accept mild bases, weak acids but not organic solvents.
Product Information
Moulded in Polypropylene, the top of the box is attached to the bottom through well designed built-in hinges. The bottom has built-in spaces to hold vials up to 2ml. capacity. Available in two different sizes, these autoclavable boxes bear alpha numeric index for easy identification of different vials placed inside.
Product Information:
Code
Particulars
Packing
183-A
25 places for 1ml or 1.8 ml Cryo Vials
8pcs
183-B
50 places for 1ml or 1.8ml Cryo Vials
8pcs
183-C
81 places for 1ml or 1.8ml Cryo Vials
4� Pcs
ESAW Cryo Rack is moulded in Polycarbonate making it tough, durable & autoclavable. This handy rack can hold 50 vials ata time. The unique feature of this rack is that vials can be unscrewed without actually picking them up as the vial will lock in every well and hence will not twist. This rack is provided with four anti skid rubbers & each well is identified with an alpha-numeric index.
Product Information
Code
Particulars
Packing
181
50 places for 1,1.8 & 4.5 ml Cryo Vials
100 pcs
These Coders available in different colours can easily fit into the cap of cryo vials for colour identification of different samples.
Product Information:
Cryo vials are normally used for storage of Biological material, human & animal cells. These sterilized tubes are provided with white, prominent graduations and a long marking area for sample identification. The cap of these vials is provided with a seal ring inside to make it completely leakproof. The longitudonal grooves in the base give a non-twisting feature to these vials when placed in a cryo rack.
Product Information:
These racks can conveniently hold inverted tubes for drying purpose and minimizes collection of airborne contaminants inside the tube. This rack can also be used to hold and dry electrophoresis and chromatography plates
Product Information:
These non-corrosiv moulded Retort Stands provide excellent replacement for the metal ones, Even the metallic rod has a polypropylene covering making it non-corrosive. The rod measuring 12.5 mm x 750 mm can be screwed into the heavy base giving way to a perfectly stable Retort Stand.
Product Information:
ESAW Draining Rack provides an excellent option for post wash draining of tubes & bottles in the laboratory. The back plate has 20 holes into which pegs are tightened with the help of screw-nuts. Bottom of the rack is provided with a tray which collects all the waste water drained down which can further be collected in a container via drain tube. This rack does not rot, stain or rust.
Product Information:
Code
Particulars
Packing
230
Draining Rack
1 Pcs.
10526 Glass Glass Products Suppliers
Short on time? Let Glass Glass Products sellers contact you.
