Precision engineering meets cutting-edge technology in our Rotary Microtomes. Designed for precise sectioning of biological tissues, these instruments are ideal for histology, pathology, and research applications
TECHNICAL SPECIFICATIONS:
Rust proof construction.
Manual Microtome with specimen feed system.
Lockable hand wheel at any position allowing change of blade/specimen easier and safe.
Lateral knife adjustment to ensure that the entire width of the blade is used without releasing the blade clamping mechanism.
Large storage capacity on the top of the instrument for easy access of tools.
Finger protection guard to protect the used from any injuries caused due to blade.
Robust and stable base plate for max/imum stability to the microtome.
Ergonomic and user friendly design.
Section Waste tray to collect section waste and is easily removable for cleaning purposes.
High Precision Specimen feed.
Section/Trimming Thickness Range :0.5µm-60µm
Setting Values: 0.5µm-2µm in 0.5µm increments.
2µm-20µm in 1µm increments
20µm-60µm in 5µm increments.
Minimum Setting Value: 0.5�µm
Object feed: 28mm
Vertical stroke: 60mm
Specimen horizontal feed: 28mm
Specimen Orientation: x- and y-axes : universal 8o
Z-axis: up to 360o
Max. Specimen size-50x50mm.
Operation-Manual.
Weight-35 kg. Standard accessories: High profile disposable blades pkt of 50 nos
Advanced Tissue Processor is designed to prevent a solution to the rapid processing of tissue in HistologyLaboratories. It removes all the water from a tissue sample and replaces it with paraffin waxwith optimum speed to curtail damage to the tissues caused by dehydration and shrinkage..
TECHNICAL SPECIFICATION-
Operated by feather touch keyboard with digital display. Display shows: Real time, date, month and year. Station no. is display in which tissue basket is
running. Station time and lapse time shown on display.
All electrical switches are silver coated and heavy duty
Leak proof wax bath
Internal parts fabricated from LM grade aluminum
Center brass rod moving on linear bearing
Heavy duty rotor motor used for agitation
Individual lids cover the glass beakers to avoid evaporation
Thread lock used after tightening the assembly screw and bolts.
Easy to clean platform
Safety device for tissue in case wax not melted the basket stop at the station
10th-11th till the temperature is not attained
Trouble free and maintenance free
Heavy gauge used in fabrication of body
Wax bath stainless steel inner outer with Teflon coated wire used in heater with
best quality heating wire with thermal cut out of 75�°C
External body powder coated to avoid chipping and anti-rusting chemical used all
moving parts moving on bell bearing oil sealed
Main motor used Korean Geared motor to avoid vibration and sound
ï?· In case of emergency side lifting handle provided to take out Tissue basket in case of
electricity failure
Tissue basket capacity of 30 and 80 according the size of the processor whether it is
1 liter or 2 liters.
Rotary head have a lock out facility at the end of run to prevent basket moving from
station 12 to station 1 10 stations with organic solvent resistant lipless beakers of 1 liter. Capacity
Minimum of 2 temperature controller wax bath of 1 ltr. Capacity
Wax bath have user definable temperature range of at least 50-65 with a high
temperature cut off at 75C ±5
Individual programmable timing sequence for each station from 1 min to 6 hrs. In increments of 1 min and programmable delay start time of up to 99 hrs.
Retain cycle information in case of power failure to continue processing on
restoration of power
weight- 54kg
Easy to do programming interface, LCD display shows all the parameters throughout the process, such as station number & remaining time.
Automatic Tissue Processor is designed to prevent a solution to the rapid
processing of tissue Histology Laboratory. Tissue processor removes all the
water from the Tissue sample and replaces it with paraffin Wax with
optimum speed to curtail damage to the tissues caused by dehydration and
shrinkage.
TECHNICAL SPECIFICATION:
Feathertouch key pad.
Digital panel for adjusting time sequence.
12 stage timing sequence can be programmed with each step of 1 minute
to 16 hours 39 minutes (999 min.)
Delay action of 1 to 99 hours.
Thermostatically controlled wax bath.
12 tissue containers (cassettes)
2 Basket Rotor.
10 withoutlip glass beakers
Exclusive 3 part modular system for an agronomical operation.Assemble the modular units to your convenience or place them separately.Fast embedding of tissue specimens in paraffin, vast for huge quantities.Optional equipped with novel heated forceps, hotonly at the tip.
SPECIAL FEATURES :
Microprocessor controlled five independent heating zones.
Large storage tank with filter that ensures continous flow of paraffin from the tank.
Automatic system start and stop ( 7 day memory).
Electrically heated forceps holder on both sides.
Temperature display panel for all heated areas.
Paraffin flow control via keypad and foot pedal.
Illuminated work area.
Two Tissue preservation boxes, paraffin nozzle.
Advanced flexible heating method, to overcome the traditional
shortcomings of excessive heating temperature, quick heating
and high precision, as well as double overheat protection, safe,
reliable and energy saving.
Large LED display allows user to see temperature without
scrolling.
Left and Right thermal Chambers, Hot plate, Forceps wells,Dispenser all individually temperature controlled.
 Light indicators keys
 Heated Holder for 6 Forceps
Stainless Steel Paraffin large tank of 3-5 litres capacity
10494 Glass Glass Products Suppliers
Short on time? Let Glass Glass Products sellers contact you.
Paraffin Wax bath is required after the step of cutting paraffin sections and before theseare placed on slides. It lets tissues relax and smoothen before being mounted on slide as well as makes paraffin stick to the slide. This ensures removal of wrinkles and folds before sections are placed on the slide.
Tissue Floatation Bath is a simple, economical, designed to lay section of Histological samples. TFB-177 provides high thermal conductivity rates and outstanding scratches resistance due to its special coating overheating protection system along with a stand- by mode.
TECHNICAL SPECIFICATION
Precise temperature control.
Built in memory for storing set temperatures.
Jet-Black surface for easy identification of Tissues. Suitable to work on 220V, Single phase, 50Hz AC supply.
Water Temperature Range: Ambient to 99C
 Temperature Tolerance: +1C
Power: 200V, 50Hz
 Tub Dimensions: 300x200x60mm
Digital LCD Display.
100 ~ 2500rpm speed.
Maximum Volume 20L.
Stirring has three modes - Clockwise,
Anticlock wise & Alternating.
Stainless Steel Head.
Digital type bushless motor.
TECHNICAL SPECIFICATIONS:
Overhead Stirrer - OHS100
Max. Volume : 20L
Display : LCD
Speed(r.p.m) : 100-2500
Working Time :Â Continuous
Structure-Â : Exterior Plastic shell
Motor power-Â 60W
Setting & Speed mode� : Digital
Timer-Â : Yes
Max Viscosity - 10000 Mpas
Plate size -Â 200- 300 mm
Plate load : 50kg
Power Supply Using Adaptor, : AC 220V / 50-60Hz
Dimension & Weight : 400- 250 - 210 mm & 7.5kg
Magnetic stirrer is mainly suitable for liquid mixing, it can simultaneously do heating and stirring of low viscosity liquids or solid liquid mixtures. Its used as an experimental tool in various
Universities, Environmental Protection, Sanitation, Epidemic Prevention,
Chemical Tap Water, Medical and Other Units.
Digital LCD display.
Control through Knob.
 Maximum Stirring Volume 2L.
 Stirring - MS100S.
Heating & Stirring - MS280H
Brand
Labtical
Model Name/Number
MS280H
Type
Magnetic Stirrer
FunctionÂ
Stirring & Heating only
Temp. Range & Accuracy
280C & Acc.+1C (<100C)+ 3C(<280C )
Digital LCD Display.
100 ~ 2500rpm speed.
Maximum Volume 20L.
Stirring has three modes - Clockwise,
Anticlock wise & Alternating.
Stainless Steel Head.
Digital type bushless motor.
TECHNICAL SPECIFICATIONS:
Overhead Stirrer - OHS100
Max. Volume : 20L
Display : LCD
Speed(r.p.m) : 100-2500
Working Time :Â Continuous
Structure : Exterior Plastic shell
Motor power:Â 60W
Setting & Speed mode : Digital
Timer : Yes
Max Viscosity :Â 10000 Mpas
Plate size :Â 200 -300 mm
Plate load : 50kg
Power Supply Using Adaptor, : AC 220V / 50-60Hz
Dimension & Weight :Â 400- 250- 210 mm & 7.5kg
Blood Roller Mixer is specially designed for the preparation of blood homogenous. It is commonly used in counting Platelets, RBC, and WBC counts on Hematology Analyzer. It is also used in the preparation of the solution like viscous substances, mixing blood samples, liquid-solid suspensions that need minimum aeration.
Specifications
Parameters
Values
Roller size
4 Nos. x 230 mm long
RPM
30 RPM/ 36 RPM
Mixing Time
15 to 20 Minutes
Weight
2.0 Kg. Net
Capacity
Container 6 Nos. (4ml) or 5ml x 15 Nos
Roller size
4 Nos. x 340 mm Long
RPM
30 RPM/ 36 RPM
Mixing Time
15 to 20 Minutes
Weight
2.4 Kg. Net
Capacity:zzz
Container 12 Nos. (4ml) or 5ml x 24 Nos
Vortex mixers are� mainly used to mix beakers or small vials of liquid. The device itself is straightforward, consisting of an electric motor with a vertical drive shaft.The vortex speed is adjustable and usually ranges from 100 to 3,200 rpm.
Compact, rugged construction
Heavy metal base & rubber feet prevent movement of the shaker during use
Choice of continuous & touch mode
Variable speed control
Include one hand insert, micro tube insert & cup attachment
Technical Specification:
Body Material
: Main Frame : ABS, Caps : Silicone Rubber, Base : Steel Alloy
Down flowing Minipleat HEPA filttered air with 99.999% down to 0.3 guarantees sample protection. Ideal for applications in microbiology, biotechnology, foresic, research labs, hospitals etc.
Features
Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 conditions.
Cabinet is fabricated of mild steel sheet duly powder coated.
Working table is made of Stainless Steel Sheet (SS-304 grade).
Front door is made out of thick transparent plexiglass.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters having an efficiency rating.
Heavy Duty Motor operates with a minimum noise level.
Using a dynamic machine, the blower and motor assembly are statically & dynamically balanced.
Working area is illuminated by fluorescent lighting fitted to the unit.
Supplied complete with S.S. Table Top, Transparent front door, Static Pressure Manometer, Built-in U.V. Germicidal light and Cock for gas, air or vacuum line, HEPA filters and pre-filter.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU â?? 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
With Solid Side Walls and transparent front door.
To work on 220/230 volts A.C. supply.
Technical specifications
Purity: Confirming to class 100 conditions
Main filter: HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3. These filters are designed to accommodate higher air flow volume.
Prefilter: Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Illumination: Fluorescent Lamp 40W
Sterilizing: UV Germicidal Tube.
Utility: Gas/Air cock
Supply Voltage & Frequency: AC 230V, 50/60 Hz
Provides a horizontal air flow parallel to work table with proven protection to the sample and processes with H-14 Minipleat HEPA Filters with 99.999% efficiency down to 0.3.
Features
Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 conditions.
Cabinet is fabricated of wooden board laminated with sunmica OR CRC Sheet (powder coated) OR stainless steel (SS-304grade) (as ordered).
Working table is made of Stainless Steel Sheet (SS-304 grade).
Front doors are made out of thick transparent plexiglass.
Heavy Duty Motor operates with a minimum noise level.
Working area is illuminated by fluorescent lighting fitted to the unit.
Supplied complete with S.S. Satin finish Table Top, Transparent front door, Static Pressure Manometer, Built-in U.V. Germicidal light and Cock for gas, air or vacuum line, HEPA filters and pre-filter.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU â?? 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU â?? 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
With Solid Side Walls and transparent front door.
To work on 220/230 volts A.C. supply.
Technical specifications
Main filter: HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3. These filters are designed to accommodate higher air flow volume.
Prefilter: Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU â?? 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Illumination: Fluorescent Lamp 40W
Sterilizing: UV Germicidal Tube.
Front door: Made of Plexi Glass
Utility: Gas/Air cock
Supply Voltage & Frequency : AC 230V, 50/60 Hz
MOC (CABINET): Wooden or CRC Sheet (powder coated) or Stainless Steel (SS-304)
Work Table: Stainless Steel (SS-304 grade)
These totally exhaust system are designed for 100% exhaust of HEPA filtered air outside the room through a exhaust duct protects user product as well as the laboratory. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.
Features
100 % air exhaust
Negative pressure air surrounding all biological contaminated parts
Class II, Type B2 cabinets are total exhaust cabinets, widely used in toxicology laboratories and similar applications where chemical effluent is present and clean air is essential.
There is no recirculation within the work area.
Room air enters through a blower/motor in the top of the cabinet and passes through a HEPA supply filter into the work area as the vertical unidirectional airflow.
Descending air is pulled through the base of the cabinet through the perforated front and rear grilles.
Simultaneously, air entering through the perforated front opening is pulled through the grille and exhausted immediately,
100% of the air is pulled into the facility exhaust system for appropriate treatment.
Type B2 cabinet is hard-connected to an exhaust system.
Negative pressure surrounds the work area with double-wall plenums for protection.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on the air leaving side; conforms to EU-4 /G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
Aerodynamic airflow grills maintain safety and prevents blockage.
U.V and fluorescent interlock available
Ergonomic and comfortable sloped front window for comfortable head and elbow rest position, thus reducing fatigue
Sash is counterbalanced for smooth and lightweight operation with a standard opening for easier access to the work zone and enhanced user safety.
CLASS-II design ensures PERSONNEL, PRODUCT and ENVIRONMENT PROTECTION.
Class II Biosafety Cabinet Protection
Personnel protection from harmful agents used inside the biosafety cabinet.
Product protection to avoid contamination of the works, experiment or process from outside contaminants.
Environmental protection from contaminants contained within the biosafety cabinet.
Class II Biosafety Cabinet Key Features
A front access opening with carefully maintained inward airflow.
HEPA-filtered, vertical, unidirectional airflow within the work area.
HEPA-filtered exhaust air to the
Bio safety Cabinet Class II Type A 2 GMP model,Recirculates 70% of HEPA filtered air and rest 30% air exhausted through optional exhaust system. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.
Features
30% air exhaust
70% air recirculation
HEPA OR ULPA -filtered exhaust air in Type A2 cabinet may be recirculated into the room or exhausted to the outdoors through a canopy exhaust connection.
HEPA OR ULPA -filtered downflow air is a portion of mixed downflow and inflow air from a common plenum.
Negative Pressure air surrounding all biological contaminated ducts and plenums.
Negative pressure surrounds the work area with double wall plenums for protection.
Air drawn through pre-filter is made to pass through highly effective HEPA OR ULPA (High Efficiency Particular Air) filters. The prefilter fitted extends the life of HEPA OR ULPA filter drastically. Fitted with HEPA OR ULPA Filter made from water resistant, fire retardant, imported micro fine glass fibre media; conforms to EU â?? 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼.These filters are designed to accommodate higher air flow volume.
Prefilter are made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU â?? 4 / G-4 Grade, with an efficiency of down to 10 micron. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
Aerodynamic airflow grills maintain safety and prevent blockage
U.V and fluorescent interlock available
Ergonomic and comfortable 10 degrees sloped front window for comfortable head and elbow rest position, thus reducing fatigue.
The sash is counterbalanced for smooth and lightweight operation with the standard opening of 200mm �±10 mm for easier access to work zone and enhanced user safety.
Class II Biosafety Cabinet Protection
High velocity air forced through HEPA OR ULPA filters.
Filtered air is thrown in the chamber through jet nozzles with a high velocity which in turn disperse particulate matter on all surface.
The lower portion of the Air showers suck the contaminated air and allow it to pass to blower supply plenum through pre-filter installed at the base.
This process is a continuous process in which air is continuously filtered and recirculated inside the chamber without any exchange with the external environment.
Upper & front cover
Removable upper and front cover simplifies filter, blower and front control panel replacements and maintenance easier.
Material of construction
Working Table is made up of Stainless Steel (SS-304). External Cabinet is fabricated of SS 304
Front Window/Sash
Front Sash consists of a toughened transparent glass for a clear inside view. In addition it serves optimum resistance and protection from harmful UV rays, protects user from exposure to harmful Ultraviolet radiation.
Bio safety Cabinet Class II Type A 2,Recirculates 70% of HEPA filtered air and rest 30% air exhausted through optional exhaust system. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.
Features
30% air exhaust
70% air recirculation
HEPA OR ULPA -filtered exhaust air in Type A2 cabinet may be recirculated into the room or exhausted to the outdoors through a canopy exhaust connection.
HEPA OR ULPA -filtered downflow air is a portion of mixed downflow and inflow air from a common plenum.
Negative Pressure air surrounding all biological contaminated ducts and plenums.
Negative pressure surrounds the work area with double wall plenums for protection.
Air drawn through pre-filter is made to pass through highly effective HEPA OR ULPA (High Efficiency Particular Air) filters. The prefilter fitted extends the life of HEPA OR ULPA filter drastically. Fitted with HEPA OR ULPA Filter made from water resistant, fire retardant, imported micro fine glass fibre media; conforms to EU â?? 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼.These filters are designed to accommodate higher air flow volume.
Prefilter are made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU â?? 4 / G-4 Grade, with an efficiency of down to 10 micron. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
Aerodynamic airflow grills maintain safety and prevent blockage
U.V and fluorescent interlock available
Ergonomic and comfortable 10 degrees sloped front window for comfortable head and elbow rest position, thus reducing fatigue.
The sash is counterbalanced for smooth and lightweight operation with the standard opening of 200mm �±10 mm for easier access to work zone and enhanced user safety.
Class II Biosafety Cabinet Protection
High velocity air forced through HEPA OR ULPA filters.
Filtered air is thrown in the chamber through jet nozzles with a high velocity which in turn disperse particulate matter on all surface.
The lower portion of the Air showers suck the contaminated air and allow it to pass to blower supply plenum through pre-filter installed at the base.
This process is a continuous process in which air is continuously filtered and recirculated inside the chamber without any exchange with the external environment.
Upper & front cover
Removable upper and front cover simplifies filter, blower and front control panel replacements and maintenance easier.
Material of construction
Working Table is made up of Stainless Steel (SS-304). External Cabinet is fabricated of CRC sheet duly powder coated
Front Window/Sash
Front Sash consists of a toughened transparent glass for a clear inside view. In addition it serves optimum resistance and protection from harmful UV rays, protects user from exposure to har
Fume Hoods are designed to function as an enclosed ventilated workspace- can provide a substantial degree of protection for the experimenter.It is designed so as to throw-out all toxic harmful vapour, acidic/alkaline fumes, chemical vapors, removal of odour etc from the hood working area, thus protecting costly instruments and the person working in the lab
SALIENT FEATURES & CONSTRUCTION OF FUME HOOD
Low Cost.
Low Noise..
User Friendly Ergonomic Design.
Generates a negative pressure inside the hood thus facilitating removal of all contaminants from the works area, into the atmosphere.
Basic material is thick board wood front back top and exterior surfaces are covered with Cold rolled steel duly powder coated
All interior surfaces are sealed and checked for leakage.
Work table is made of High Quality Granite and is fitted with a small S.S. sink with water tap connections.
Working area is illuminated by fluroescent lighting fitted to the unit.
The front door moves vertically up and down with concealed counter balanced weight.
The blower and motor assembly is statically and dynamically balanced & operates with minimum noise level.
Height of the working table provides comfortable "SIT DOWN" working position for the operator.
The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light.
Supplied complete with cord & plug to work on Single Phase 220 / 230 volts A.C. supply.
Front Door Moves vertically up and down with concealed counter balanced weight/by Hinges
Fitted with acid/alkali resistant tile and SS sink fitted with swan type water tap.
Fume Hoods are designed to function as an enclosed ventilated workspace- can provide a substantial degree of protection for the experimenter.It is designed so as to throw-out all toxic harmful vapour, acidic/alkaline fumes, chemical vapors, removal of odour etc from the hood working area, thus protecting costly instruments and the person working in the lab.
SALIENT FEATURES & CONSTRUCTION OF FUME HOOD
Low Cost.
Low Noise.
User Friendly Ergonomic Design.
Generates a negative pressure inside the hood thus facilitating removal of all contaminants from the works area, into the atmosphere.
Basic material is thick board wood front back top and exterior surfaces are covered with Cold rolled steel duly powder coated
All interior surfaces are sealed and checked for leakage.
Work table is made of High Quality Granite and is fitted with a small S.S. sink with water tap connections.
Working area is illuminated by fluroescent lighting fitted to the unit.
The front door moves vertically up and down with concealed counter balanced weight.
The blower and motor assembly is statically and dynamically balanced & operates with minimum noise level.
Height of the working table provides comfortable "SIT DOWN" working position for the operator.
The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light.
Supplied complete with cord & plug to work on Single Phase 220 / 230 volts A.C. supply.
Front Door Moves vertically up and down with concealed counter balanced weight/by Hinges
Fitted with acid/alkali resistant tile and SS sink fitted with swan type water tap.
Fume Hoods are designed to function as an enclosed ventilated workspace- can provide a substantial degree of protection for the experimenter.It is designed so as to throw-out all toxic harmful vapour, acidic/alkaline fumes, chemical vapors, removal of odour etc from the hood working area, thus protecting costly instruments and the person working in the lab.
10494 Glass Glass Products Suppliers
Short on time? Let Glass Glass Products sellers contact you.
