Microprocessor Based.
LCD display.
Selectable Speed.
Temperature Monitoring.
Optional Accessory - Low Viscosity Adaptor (0 Spindle).
Instrument has a % of full scale function, which allows the user to select the spindle and speed to measure the liquid.
Microprocessor Dissolution Test Apparatus is a solid state instrument designed for the determination of active drug ingredient in any pharmaceutical formulation, tablet or capsule as per IP and USP specifications. This apparatus evaluates adequate bio-availability and provides necessary information to formulate in the development of therapeutically optimum dosage forms. The instrument is designed and manufactured for pharmaceutical industries. It is used in quality control and R & D to determine compliance with the dissolution requirement of the Tablet and Capsule as per USP/IP standards.
Features:-
8 Stations
Complies with USP, IP specifications
Extremely Useful for Pharmaceutical Labs
Highly Accurate and Easy to Operate
Programmable Stirrer Speed Control i.e. (25 â?? 200 RPM)
0 x 4 Line Alphanumeric LCD with Backlit
19 Soft Touch Membrane Type Keys
Three Programming Modes i.e. Routine, Sustain and Control
20 Independent Programmable Setups for Routine and Sustain Mode with Storage Facility
200 Samples Storage Facility
Printer Attachment Facility
Audio Visual Indicators for System Status
Easy to Empty & Clean the Water bath with Bottom Drainage
Technical Specifications:-
Model
S- 958
General
Stations
8 Stations
Display
20 X 4-line Alphanumeric LCD Display with Backlit
Key Board
19 Soft Touch Membrane Type Keys
LED's
4 LED's for different Status Indications, 3 LED's for Test Status Like Run, Alarm, End & 1 LED for Heater ON/ OFF Status.
Setup Data
Facility for 20 Different Test Setups Available in Routine and Sustain Modes
Printer Attachment
Provision for the attachment of dot-matrix printer with Centronics Parallel Port Interface Available
Stirrer
Speed
25 to 200 RPM + 1 RPM
Resolution
1 RPM
Accuracy
+1 RPM
Temperature
Range
30 To 50 Degree Celsius
Accuracy
+ 0.2 Degree Celsius
Temp. Control
Microprocessor Based Using PT 100/ Semiconductor Sensor as Per IP/USP
Sample
Reaction Vessel
1000 ml Jar with Acrylic Cover Stirrer Pedal and Mesh Basket
Heater
0.5 KW
Power
230V, - 10%, 50 Hz, AC
Weight
65 Kg. (Approx.)
Accessories:-
Main Unit with Acrylic Tank and Rectangular Cover Plate and Water Bath Temperature Sensor (T1)
External Temperature Sensor (T2) for Vessel
Reaction Vessel capacity 1000 ml
Round Acrylic Cover Plate with Hole and a large slit
S.S. Paddle, S.S Wire Mesh Basket
Glass pipettes with rubber bellows
Mains Lead
Instruction Manual
Dust Cover
Digital Friability Test Apparatus is a precision instrument suitable for measuring abrasion strength of tablets. The unit is equipped with two transparent acrylic drums which rotate at a speed of 25 +- 1 rpm. Each of the two acrylic drums are provided with an arm which carries the tablets along with it up to a predetermined height and allows them to fall from that specified height, while the drums are rotating, It is fitted with a digital revolution counter showing the current number of revolutions for the test. A thumb wheel switch is used to set the desired number of rotations. Provision is made to remove the lid of the acrylic drum by unscrewing just one knob. This is available in 1 drum and 2 drum assemblies.
Technical Specifications:-
Model
S- 938
Display
4 Digit bright red seven segment LED display
It is used to determine the disintegration time of tablets and capsule. Our Tablet Disentegration Test apparatus is designed as per pharmacopeia specification. It is provided with six-digit digital timer to monitor disintegration time of sample.
Features:-
IP/BP/USP Standard
Programmable Time with Digital Display
Auto Stop After Completion of Set Time with Alarm
Memory for Protection of Running Test in Case of Power Failure
Separate Regulator for Control of Heating
Facility for Hold and Resume the Running Test for Inspection of Sample
Type of Heating
Hot Plate
Up-Down Speed
30 + 5 Strokes/min
Up-Down Length
55 + 58 Min
Time Control
Digital (Programmable from 1 sec to 99 hr, 56 min, 59 sec)
Electric Motor
Low RPM A.C. Motor
No. of Basket
2
Temperature Control
Energy Regulator
Audio Alarm At Completion
Yes
Hold & Resume Facility
Yes
Dimension
305X330X385 mm (LXBXH)
9678 Glass Ceramics Suppliers
Short on time? Let Glass Ceramics sellers contact you.
It is used to determine disintegration time of tablets and capsule. Our Tablet Disentegration Test apparatus is designed as per pharmacopeia specification. It is provided with six-digit digital timer to monitor disintegration time of sample.Temperature control (digital with readability of 0.1). Hold and resume facility for confirming disintegration, alarm at completion of test, time control digital (Programable from 000.1 min 999.9min), precise water bath for heating, up-down speed: 30±2 Strokes/min
Features:-
Programmable time with digital display
Auto stop after the set time with audio alarm for enteric coated tablets
Facility to hold and resume the time and motor movement for quickly disintegration tablets.
Manual mode of operation in case digital system fails
Special low RPM motor means less noise and constant speed even at very low/high voltage (160-260)
Heating control through digital temp. meter
Securely seal blood bags with our reliable tube sealer.� Ensures airtight storage and prevents contamination.Perfect for hospitals, blood banks, and medical research facilities.
Lightweight, portable and heavy duty.
Di-Electric heating without damaging the blood cells.
Modern electronic system.
Wide seal of 4-6 mm diameter.
Easy to clean electrodes
Electrodes well protected by a cover
Able to seal all blood bag tubes.
Senses the blood bag tube for automatic sealing process
Power control unit monitored by microprocessor.
Continuous Battery backup 230V in� Online mode.
Battery Backup gives 500 sealing when fully charged on offline mode.
Visual indication for Mains, Ready & Seal
A Needle Burner cum Syringe Destroyer is a vital medical device used for the safe and efficient disposal of used needles and syringes. This device typically employs a heating element to melt and incinerate needles, rendering them non-reusable and eliminating the risk of accidental needlestick injuries. It provides a hygienic and environmentally friendly solution for healthcare facilities to manage sharp medical waste, ensuring the protection of both healthcare workers and the environment.
Key Features :
It is moulded type made of ABS Plastic and is Shock Proof.
Suitable sliding tray made of ABS lined with SS material of thickness 0.8mm (minimum) on the side walls as well as the bottom of the tray is provided for collection of residue and destroyed tips syringe.
Suitable provision to burn the needle and to cut the syringe tips are provided in the unit.
It complies in general to the requirements of IS:302 (Part-1) 1979 to ensure safe and reliable operation in normal use.
2. Manual Cutter: Fitted with High Carbon Cutter to cut Syringe Hub.
3. Capacity: The unit is having adequate capacity to destroy all kinds and following sizes of injection needles. Dia ranging from 24G upto 18G.
4. Power Switches: Power on/off switch is provided along with power on indicator. The unit is provided with fuse of adequate rating. The item quoted is also provided with power cord of 1.5 meter length and an earthing point.
5. Power Requirements: Power 230V+10% 50HZ AC supply requirements. The following are the power requirements.
1. In Stand-by mode maximum upto 3 watt.
2. During destruction of thickest needle of 18G maximum power requirement/power consumption is maximum 5 amp at 230VAC.
3. The 5 pieces of injection needle of 18G upto full length as available in market can be destroyed in continuous operation.
Portable Turbidity meter, has Principle Nephelometric Method (90)
2 to 5 points calibration, using formazin standards.
Selectable of 4 Turbidity units NTU, FNU, EBC, ASBC.
Single measurement mode, automatically identify and lock the measurement end.
Continuous measurement mode for indexing or matching vials.
Automatic Power OFF, effectively save battery energy consumption
Settings menu to customize the number of calibration points, date and time, display resolution etc...
Reset function, automatically restore the meter to factory default settings.
Expand memory to store or retrieve up to 100 sets of data.
USB communication interface, easy to transfer data or connect power adapter to the meter.
Automatic shutdown - After 15 minutes, If not in use
Carrying Case is Standard Supply
Principle-Â Nephelometric Method (90)
Turbidity Measuring range-0~1100 NTU/0~275 EBC/0~9999 ASBC
Display resolution -0.01 (0~99 NTU), 0.1 (100~999 NTU), 1 (1000~1100 NTU)
Measurement accuracy -2% (0~500 NTU),+3% (501~1100 NTU)
Calibration point -Â 2 to 5 points (0.02, 10, 200, 500, 1000NTU)
Calibration Standard value : 200, 500, 1000 NTU
4 turbidity units-Â NTU, FNU, EBC and ASBC.
Light source-Â Infrared light-emitting diode, 850nm
Detector : Silicon photoelectric
Stray light : ; 0.02 NTU
Vial size -Â 60 (height) 25 (diameter) mm
Sample Volume : (approx.) 30ml
Carrying Case- Available
Auto-Power OFF : Yes
Display -Â LCD
Data storage : 100 data readings
Ambient Temperature -Â 10 C~ 40 C
Interface- USB
Power supply type - AA battery 3 cells or DC5V power adapter
Packing Dimension -Â (LxWxH) 280 x 80 x250 mm
Net / Gross Weight : 300g / 1.5kg
Turbidity meter LMTB200 with TSS measurements mode,selectable four turbidity units
Turbidity meter is equipped with a 4.5" TFT display
2 to 7 points calibration using the formazin standards
Selectable four turbidity units,including the NTU,FNU,EBC and ASBC
TSS conversion factor ensures accurate measurement for total suspended solids
Contiuous measurement mode that can used for indexing and matching the sample vials
Hold fuction freezes current reading for easy viewing and recording
Password protection prevents the unathorised calibration and settings
Help message as a operational guide that helps user quickly begin using the meter
System menu allows setting the 9 parameters,including the date and time,resolution etc..,
Reset feature automatically resumes all settings back to factory default settings
LABMAN LMMP-30 water quality meter is designed for high performance and easy operation. The meter is capable of measuring up to 7 water quality parameters,
including pH, ORP Conductivity, TDS, Salinity, Resistivity, and temperature.
MULTI-POINT PUSH-BUTTON CALIBRATION
The meter has multi-point calibration mode. From setup menu, choose calibration
and immerse electrode into indicated calibration solution, press ENTER key and
meter is automatically calibrated.
AUTO-BUFFER RECOGNITION
During calibration, if the calibration solution or selected value does not match the
meter\'s indicated value, an ERROR message is displayed.
VIEWING OF ELECTRODE SLOPE
After calibration, the percentage slope of the electrode is displayed before the
meter returns to measurement mode. Per the slope value, user decides whether to
change the electrode.
AUTOMATIC TEMPERATURE COMPENSATION� : By using temperature probe
AUTO-RANGING FOR CONDUCTIVITY
The meter has auto-range functions for measuring conductivity and total
dissolved solids (TDS). Upon immersing conductivity sensor into sample
solution, the screen immediately displays the value in appropriate
measurement range for accuracy,
ADJUSTABLE TEMPERATURE COEFFICIENT
Various ions in solution have different temperature coefficients.
LABMAN-LMMP30. can set the temperature coefficient between 0 and
3.9% in degrees centigrade for optimum accuracy.
ADJUSTABLE CELL CONSTANT
The meter has three cell constants for measuring requirements. Once a
cell constant has its calibration set, it is saved and does not require
re-calibration when switching meter.
MESSAGE INDICATOR
LABMAN-LMMP30 displays helpful messages like an on-screen manual for
easy operation of this meter and selection of the various options.
SAVE AND COMMUNICATION INTERFACE
The meter all has real-time date/clock stamps. The memory stores up to
99 discrete data sets. Press the SAVE key to store the current measured
values and it automatically generates a serial number with the date
and time. This data can then be sent to a computer via the USB port
TECHNICAL SPECIFICATIONS
pH Range-Â -2.000 to I6.000pH
pH Resolution +0.001pH
pH Accuracy -±0.002pH
Calibration Points :2 points, NIST(pH4.00/6.86/9.18) or USA(pH4.01/7.00/10.01]
mV/ORP Range : 0 to+1999.9mV
mV/ORP Accuracy :+0.2mV
Temperature Compensation: 0.0 to 100.0C, Manual or Automatic
Conductivity Range : 0 to 1.999,19.99,199.9,1999 S, 19.99, 200.0mS
Conductivity Accuracy : + 0.5% F.S
Calibration Points : 1 point per range
Temperature Compensation : 0 to 50�°C, Manual or Automatic
Cell Constant : 0.1,1.0,10 adjustable
TDS Range : 0 to 100 ppt, Max.200 ppt
TDS Conversion Factor : 0.01 to 1.00, Default 0.67
Salinity Range : 0 to 50 ppt, 0.00 to 5.00%
Resistivity Range and Accuracy : 0 to 100M, W+ 1%
Temperature Range : 0.0 to 100.0C,
Temperature Accuracy : +0.3C
Memory & Output : 99 data sets with date/ time stamping, USB
Weight - 1.75 kg
Pocket Multiparamter is a portable multi para tester used in Water & Waste Water Treatment Electroplating Rinse Tanks, Drinking WaterHydroponics, Aquaculture, Aquariums, Fish Farms, Swimming Pools etc..
Features :
Ip67 Waterproof level, can float on the water surface.
pH, Conductivity, TDS, Temp. Functions.
Electrode module can be replaced, Long Life Usage.
Auto OFF Function.
Double Line LCD Display.
Temperature Compensation.
4 x 1.5V coin cell batteries.
Microprocessor Water and Soil Analysis Kit S- 967 measures 7 parameters like pH, Conductivity, TDS, DO, Salinity, Temp, mV,It has perfect durability and longevity which can be stored up to 1000 samples. Mains cum battery operated. Fitted in briefcase having soft touch membrane keys.
Features-
pH, Conductivity, TDS, DO, Salinity, ORP, Temperature Measurements.
Highly Accurate & Stable
User Friendly & Menu Driven Software
16X2 Line Alphanumeric Jumbo LCD
PC Interface Facility
Interfacing Port RS 232
Technical Specifications-
Model
S- 967
Product Name
P Water and Soil Analysis Kit
Display
16X2 Line Alphanumeric Jumbo LCD
pH
Range
0-14 pH
Resolution
0.01 pH
Accuracy
+ 0.01, + 1 Digit
Temp. Comp.
0-100C, (Auto/ Manual)
Conductivity
Range
0-20, 0-200 µS0-2, 0-20, 0-200 mS, 0-1000 mS
Resolution Selection
0.01 µS
Accuracy
+0.5% FS, + 1 Digit
Cell Constant
0.05-10.5, Adjustable
Temp. Comp.
5-50C (Auto/Manual)
Reference Temp.
5-50C (Auto/Manual)
Temperature
Range
0-100C
Resolution
0.1C
Accuracy
+ 0.1C, +1 Digit
Sensor
PT-100 (RTD Probe)
TDS
Range
0-20, 0-200 ppm,0-2, 0-20, 0-200 ppt, 0-1000 ppt
Range Selection
Automatic
Cell Constant
Adjustable
Resolution
0.01 ppm
ORP
Range
0-+1999.9 mV
Resolution
0.1 mV
Accuracy
+0.1 mV, + 1 Digit
Salinity
Range
0-20, 0-200 ppm0-2, 0-20, 0-50 ppt
Resolution
0.01 ppm
Accuracy
+ 1% of range, + 1 Digit
DO
Range
20 ppm
Resolution
0.1 ppm
DO Sensor
Gold/Silver Probe
Temp Comp.
Auto/Manual (50�°C)
Accessories:-
pH Electrode
Cond/TDS/ Cell
Probe
DO Probe
DO Membranes
Tables 7pH &4pH
12V Adapter
Software CD
RS 232 Cable
Operation Manual
Microprocessor Water and Soil Analysis Kit S- 959 measures 8 parameters like pH, Conductivity, TDS, DO, Salinity, Temp, mV, Turbidity. It has perfect durability and longevity which can be stored up to 1000 samples. Mains cum battery operated. Fitted in briefcase having soft touch membrane keys.
Features:
pH, Conductivity, TDS, DO, Salinity, ORP, Temperature Measurements.
Highly Accurate & Stable
User Friendly & Menu Driven Software
16X2 Line Alphanumeric Jumbo LCD
PC Interface Facility
Interfacing Port RS 232
Technical Specification-
Model
S- 959
Product Name
µP Water and Soil Analysis Kit
Display
16X2 Line Alphanumeric Jumbo LCD
pH
Range
0-14 pH
Resolution
0.01 pH
Accuracy
± 0.01, + 1 Digit
Temp. Comp.
0-100C, (Auto/ Manual)
Conductivity
Range
0-20, 0-200
0-2, 0-20, 0-200 mS, 0-1000 mS
Resolution Selection
0.01 S
Accuracy
+ 0.5% FS, + 1 Digit
Cell Constant
0.05-10.5, Adjustable
Temp. Comp.
5-50C (Auto/Manual)
Reference Temp.
5-50C (Auto/Manual)
Temperature
Range
0-100C
Resolution
0.1C
Accuracy
+ 0.1C, + 1 Digit
Sensor
PT-100 (RTD Probe)
TDS
Range
0-20, 0-200 ppm
0-2, 0-20, 0-200 ppt, 0-1000 ppt
Range Selection
Automatic
Cell Constant
Adjustable
Resolution
0.01 ppm
ORP
Range
0-+1999.9 mV
Resolution
0.1 mV
Accuracy
+0.1 mV, + 1 Digit
Salinity
Range
0-20, 0-200 ppm
0-2, 0-20, 0-50 ppt
Resolution
0.01 ppm
Accuracy
+ 1% of range, + 1 Digit
DO
Range
20 ppm
Resolution
0.1 ppm
DO Sensor
Gold/Silver Probe
Temp Comp.
Auto/Manual (50C)
Turbidity
Range
0-1000 NTU
Resolution
1 NTU
Sample System
30 mm Clear Glass Tube
Power Supply
12V Rechargeable Battery or 12V/2 AMP Adaptor
Accessories:-
pH Electrode
Cond/TDS/ Cell
Probe
DO Probe
DO Membranes
Tables 7pH & 4pH
12V Adapter
Software CD
RS 232 Cable
Microprocessor Flame Photometer Are used for the determination of sodium, potassium, calcium and lithium. They use the latest microcontroller technology and advanced engineering techniques so as to give enhanced and reproducibility.
Features:-
Useful for both ppm and meq application
Measurement of four elements with single aspiration .Automatic filter selection
Curve fitting software (up to 5 standards)
Collaboration stored in memory
Re-standardization facility with only one standard
User friendly menu driven software
Help key available at each & every operating step.
Technical Specification:-
Model
S-935
Range
General
Serum
Urine
Na: 0-100 ppm
Upto 250 meq/l, 1: 100Â dil
K: 0-100 ppm
Upto 250 meq/l, 1: 100 dil
Ca: 0-100 ppm
Upto 250 meq/l, 1: 100 dil
Li: 0-100 ppm
Upto 250 meq/l, 1: 100 dil
Na:- 0-200
1:100 dil
K: 0-10
1: 100 dil
Li: 0-2
1: 5 dil
Na: 0-250&
1: 100 dil
K: 0-100
1: 100 dil
Ca: 0-10
1:2 dil
Sensitivity
Na: 0.5 ppm, K: 0.5 ppm,
Ca: 15 ppm (Optional), Li: 50 ppm (Optional)
Resolution
0.1 ppm/meq
Accuracy
2 % Error when 3 ppm Na/K and 5 ppm
Li are set as maximum standards
Display
Graphical LCD With Backlit
Average Time
In-built in software
Calibration
Up to- 5 Point Calibration with Curve Fitting Software
Gas Control
Adjustable With Knobs
Atomizer
Axial Flow Type
Ignition System
Auto Ignition System
Repeatability
+/- 2 Counts
Detector
Silicon Photodiode
Filters
Narrow Band Interference Glass Filters
Flame System
LPG and Dry Oil Free Air
PC Interface
USB Port
Power Supply
230V, +/-10 % AC, 50 Hz
Weight
7.5Â Kg (APPROX)
Accessories
Instrument with Na & K Filters, Sample Holders, Instruction Manual, Dust Cover, Main Lead, Air and Gas Tubing along with end Damps, Capillary Tubes, Chimney, Cleaning Wires, Drain Pipe etc.
Visual Colorimeter is a kind of Visual colour measuring Instrument.
It measures colour scale unit which is an International acknowledged
specific colour method, as a standard to measure the colority of liquid, gelatin, solid and powder samples.
Visual measurement of colour matching to determine material colour
Design in conformity with internationally accepted colour scale unit
Simple structure and easy to operate
Replaceable sample chamber liner
Replaceable light source, two spares Incandescent lamps.
Viewing system fully adjustable
TECHNICAL SPECIFICATIONS
Measuring principal :� Visual, in terms of International colour scale units
Modes : Transmittance, reflectance
Measurments range :� 0.1 â?? 79.9 Red, 0.1 â?? 79.9 Yellow, 0.1 - 49.9 Blue, 0.1 - 3.9 Neutral
Resolution : 0.1 colour scale unit
Viewing system Fully adjustable
Light Source- Incandescent lamp
Illuminant -Â Approximates to daylight
Path Length -Â Up to 180 mm
Diffuse reflectivity of White plate - > 80%
Amplification of the magnifiers- 1.9 X
Dimension of Colorimetric untensil- 10x20x40mm, 25.4x20x40mm, 133.4x20x40mm
Power Supply & Power Watts-Â AC 220V/50Hz & 50W
Dimension- 620x440x300mm
Weight- 12.5 kg
