Advanced Tissue Processor is designed to prevent a solution to the rapid processing of tissue in HistologyLaboratories. It removes all the water from a tissue sample and replaces it with paraffin waxwith optimum speed to curtail damage to the tissues caused by dehydration and shrinkage..
Precision engineering meets cutting-edge technology in our Rotary Microtomes. Designed for precise sectioning of biological tissues, these instruments are ideal for histology, pathology, and research applications
A fully dependable sectioning equipment designed for precise sectioning of tissues up to 1 micron thickness. It has a front located feed indicator with cam drive system for accurate feed setting from 1 to 50 microns in steps of 1 micron.
Features :Ã?Â
Independent feed mechanism with automatic safety device,
Universal knife holder with lateral movement to permit use of entire knife edge, ball and flange type object holder for accurate centering of the specimen
� full swing protective cover for easy cleaning and lubrication.
The equipment assures smooth operation throughout the long life of the instrument as individual components are manufactured with modern techniques
Digital Thermostatic Display.
Stainless Steel Tank.
High Precise Temperature Control
 High Corrosion Resistance.
MODEL Â DWB4 DWB6
Column  2 Rows 4 Holes 2 Rows 6 Holes
Internal volume (approx.) Â 18L
Temp. Rang  RT+5~99.9 C
Temp. Resolution, Accuracy 0.1 C,  Accuracy ±0.5 C
Water sink  Stainless steel
Temp. control mode  PID
Cover aperture  120mm
Cover Ring per hole 5pcs.
Power Supply AC 220V/ 3.6A(50/60Hz
Power rating  1200W
Inner Chamber size (LxWxH  300 x 300 x 140 mm  450 x 300 x 130 mm
Gross Weight 6kg  8kg
9383 Glass Ceramics Suppliers
Short on time? Let Glass Ceramics sellers contact you.
Our boiling water baths come in rectangular shape and engineered to meet most demanding needs of heated applications.
Double walled, inside made of Stainless Steel 304 Qlty.
Outside Mild Steel sheet painted in Epoxy Powder Coating.
25mm insulation with the mineral wool.
With concentric rings which are made of stainless steel 304 qlty.
Temperature by a thermostat from few C above ambient to 100C �± 1C.
With wire and plug but without thermometer.
To maintain the temperature, it can be attached in below instruments.
Viscometer Spectrophotometer Rotary Evaporator
Polarimeter Refractometer Fermentation Tank
Electrophoresis System Chromatographic Column
LCD Display.
Heating Function.
PT100 Temperature Sensor.
Both Sides folding handle for easy movement.
Overheat Protection, PID temperature Control System.
Stainless Steel Inner Tank, Water Level alarm Function.
Pump Flow rate 8L/min. & Programmable Temperature controller
TECHNICAL SPECIFICATIONS :
Temperature Range :Ambient Temperature to 100 C
Temp. resolution & Accuracy : 0.01 C & Accuracy +0.05 C
Display : LCD Display
Refrigeration : NA
Pump circulation :Â Internal & External
Temperature sensor : PT100
Pump flow rate : 8 L /min
Bath Tank capacity ;Â 10L
Tank size (LxWxD ) :Â 270 x 200 x 200mm
Bath Opening & Bath depth :Â 180 x 140 mm & 200 mm
Power Requirements : AC 220V / 50Hz
Net / Gross Weight :Â 12kg / 16kg
To maintain the temperature, it can be attached in below instruments.
Viscometer Spectrophotometer Rotary Evaporator
Polarimeter Refractometer Fermentation Tank
Electrophoresis System Chromatographic Column
LCD Display.
Cooling Heating Function.
PT100 Temperature Sensor.
Both Sides folding handle for easy movement.
Overheat Protection, PID temperature Control System.
Stainless Steel Inner Tank, Water Level alarm Function.
Fast Cooling, Low Noise, Low Vibration, stable and reliable performance.
Pump Flow rate 8L/min. & Programmable Temperature controller.
Refrigerated Brushless centrifuge with head 1.5 ml.Microprocessor based 128x64 Graphic lcd display, Temp -20 to ambient, Lid lock, Drive controlled, RPM 16000, Timer in built 99: 99, Heavy body vibration free.
Max. Speed : 20000 r.p.m.
* Max. RCF : 23000xg
* Timer : 0-99 min.
* Motor : Brushless Motor
* Temp. Range : From room temperature- to Minus 20�°C
* Temp. Accuracy : �±2�°C
* Power : AC 220V 50 Hz 20A
* Weight : 55� kg. approx.
* Dimension : L-25â?? x W-20â?? x H-14â?? approx
Special Feature :
* Low Sound
*Fitted with vacuum legs for better griping on table.
* Vibration free
* C.F.C. Free refrigeration
* Kirloskar compressor
Micro-Centrifuge machine (Mini Centrifuge)
Speed fixed 7000 rpm
Fitted with high quality motor with carbon brushes.
Complete body made of ABS plastic injection moulded.
Supply completed with 2 standard rotors as under :
Angle Rotor 6 micro centrifuge of 1.5ml capacity.
Angle rotor 12 micro centrifuge tubes of 0.5ml capacity.
A Mini Centrifuge Machine is a compact and versatile laboratory device designed for the rapid separation of small liquid samples. It employs centrifugal force to spin microtubes or small containers, effectively separating liquids from solids, such as cells or precipitates. These machines are commonly used in molecular biology, biochemistry, and clinical laboratories for tasks like DNA extraction, cell pelleting, and quick sample preparation, offering a convenient and space-saving solution for various research applications.
Key Features :
Micro processor controlled, Micro-Centrifuge machine (Mini Centrifuge)
Speed range from 1000 to 10000 r.p.m. in step of 1000.
Fitted with high quality motor with carbon brushes.
Complete body made of ABS plastic injection moulded.
Quiet & reliable
Small foot print
Built in power supply
High quality motors
Polycarbonate transparent cover
Supply completed with 2 standard rotors as under :
(i) Angle Rotor 6 micro centrifuge of 1.5ml capacity
(ii) Angle rotor 12 micro centrifuge tubes of 0.5ml capacity
Forced convection digitally controlled bacteriological incubators suitable for precise heating drying and various other laboratory drying applications requiring controlled heating zone upto 70C.
Features
Designed for critical laboratory applications for controlled temperature range up to 70C with an accuracy of ± 0.5C.
Integrated built-in see-thru toughened glass window in the double-walled door.
Forced convection model accounts for temperature uniformity and higher control accuracy.
Auto cut-off of blower and heaters on door open position.
Seamless rounded back edges of internal work chamber and semicircular arcs at corners ensures easy clean-up and uniformities.
Microprocessor Based Autotune PID temperature controller for PV/SV indication, timer, and cycle end alarm.
These units are featured with Microprocessor Based AUTOMATIC DIGITAL TEMPERATURE INDICATOR-CUM-CONTROLLER with an in-built DIGITAL TIMER to control the temperature. Once the unit is switched ON heating starts automatically and once the set/desired value is achieved the in-built AUTOMATIC DIGITAL MINUTE TIMER starts automatically. Once this set time period is over the heaters are switched OFF automatically and the unit sounds a BUZZER, thus alerting the user that process is complete.
Inner chamber and adjustable trays are made of Stainless Steel (SS-304 grade).
Outer body made of CRC Sheet duly powder coated
Horizontal on face cross-flow air circulation accounts for tighter uniformities and accuracy.
Specially designed silicone door gaskets accounts for minimal heat dissipation and leakages thus accounts in electrical energy servings.
To work on 220/230V AV, 50/60 Hz supply
Most suitable for experiments requiring low-temperature conditions like microorganism or activation, cell culture process of animals and plants, good storage and desalting process of enzyme extracts, etc.
With a solid double-walled door and a full view inner plexiglass door enables inspection and monitoring of inner chamber specimens without distributing the process temperature.
Excellent quality magnetic gum packing door gasket for an external door.
User-oriented design of shelves makes you adjust each space of shelves without difficulty.
Forced air circulation at the triple-walled back by the durable coaxial blower, maintains optimum temperature uniformity and homogeneity.
High-grade HIGH PRESSURE FOAMED IN-PLACE PUF INSULATION between outer and inner chamber for minimal thermal losses.
Caster wheel mounted for easy portability.
Front double walled door is provided with lock and key arrangement.
Door operated illumination lamp is fitted inside the chamber for easy visibility.
Finned tube evaporator facilitates uniform and faster cooling effects.
Useful for life science applications, Fermentation Studies, Ageing Tests, Growth Studies and biological cultures under various controlled temperature conditions.
Advanced shaking mechanism provides quiet shaking and precise speed control with digital display
Minimum noise, no vibration and minimal footprint
Stabilized orbital motion under uneven load distribution
Various configurations of lotus clamps available for Erlenmeyer flasks
Interior made of Stainless Steel (304 grade) with a drain-off-facility for spill overs.
One set of lotus clamps holders with one shaking platform of stainless steel (SS-304) supplied with the unit as a standard accessory
Stationery shelves made of Stainless Steel (SS-304) for use of the unit as a standard B.O.D. Incubator, can be supplied at an extra cost.
Automatic restart at preset speed in case of power failure.
Complete with universal and multipurpose glassware holding expandable spring wire platform for accommodating different shapes and sizes of laboratory bottle, breakers and erlynmeyer flaks etc.
Forced convection digitally controlled hot air ovens suitable for precise heating drying and various other laboratory drying applications requiring controlled heating zone.
Features
Forced convection system ensures good mixing, strong dispersion and maintains higher temperature uniformity inside the chamber.
Most ideal for various experiments in microbiology, cell cultivation of animals and plants and food for various laboratories, industries, R & D labs, etc.
Synthetic door gasket made of neoprene on the double-walled door.
User-oriented design of shelves makes you adjust each space of shelves without difficulty.
Adjustable two ventilation slides control inner air/vapor circulation.
Beaded heating elements are placed in ribs, at bottom and sides for uniform heat distribution.
Constructional Features
Outer body made of CRC Sheet duly powder coated
Inner chamber and adjustable trays are made of Stainless Steel (SS-304 grade).
Gap between the inner chamber and the outer wall is filled with high-grade mineral wool for minimal heat dissipation.
Bigger sized units mounted on caster wheels for easy portability.
Door fitted with heavy-duty hinges and door handle ensuring there are no leakages through the door gasket.
Temperature Range: 50Ã??C to 250Ã??C
Temperature Accuracy: �±1�?C
Temp. Controller: Microprocessor Based Digital Temperature Indicator-Cum-Controller with LED OR LCD Display OR TFT Touch Screen Display Controller (Option)
Type: Available with forced convection system
Regulator: Solid-state electronic relay with protective heat sink
Safety Device: Over-temperature limiter switch prevents overheating
To work on 220/230V AV, 50/60 Hz supply
