Hi-Low Electro Ultra Deluxe Product Code: MEF6001 Description Elegant Intensive Care Hospital Bed for comfortable recovery of patient under cumbersome conditions with various important positions available as per surgeonâ??s requirement with trolley base. Frame made of strong rectangular CRCA pipe. Four Section top of perforated CRCA sheets. Backâ??rest, kneeâ??rest, Trendlenberg/reverse Trendlenberg & Hi-low positions obtained by corded remote control. Provided with unique nursing control panels, this enables doctor to LOCK positions of bed to avoid any mishandling. ABS Molded Head & Foot Panels. ABS Tuck Away side safety Railing. Bed Mounted on 125 mm. High Strength Castors with covers, two with brakes. One Stainless Steel I.V. Rod with foldable Four I.V hooks. Pre-Treated and Epoxy Powder Coated. Size: 2200 mm x 1000 mm x 600-800 mm (LxWxH)
Hi-Low Mechanical Product Code: MEF6003 Description Elegant Intensive Care Hospital Bed for comfortable recovery of patient under cumbersome conditions with various important positions available as per surgeonâ??s requirement with trolley base. Gas spring assisted backrest adjustment ,rapid descent of the backrest if required for CPR. Frame made of strong rectangular CRCA pipe. Four Section top of perforated CRCA sheets. Back â?? rest, knee â?? rest, Trendlenberg/reverse Trendlenberg & Hi-low positions obtained by Crank Mechanism at foot end operated by four separate Handles. ABS Molded Head & Foot Panels. Collapsible Side Safety Railing. Bed Mounted on 125 mm. High Strength Castors with covers, two with brakes. One Stainless Steel I.V. Rod with foldable Four I.V hooks. Pre-Treated and Epoxy Powder Coated. Size: 2200 mm x 1000 mm x 600-800 mm (LxWxH)
Non- Hi Low Mechanical Deluxe Product Code: MEF6007 Description Specially designed ICU Bed comfortable recovery of patient under cumbersome conditions with various important positions available as per surgeonâ??s requirement with trolley base. Frame made of strong rectangular CRCA pipe. Four Section top of perforated CRCA sheets. Back rest, knee rest & Trendlenberg/reverse Trendlenberg obtained by Crank Mechanism at foot end operated by three separate Handles. Head & foot Panels made of Laminated Board fitted with Stainless Steel Pipe Frame. Collapsible side safety Railing on both sides. Bed Mounted on 125 mm. High Strength Castors with covers, two with brakes. One Stainless Steel I.V. Rod with foldable Four I.V hooks. Finish: Pre-Treated and Epoxy Powder Coated. Size: 2200 mm x 1000 mm x 600-800 mm (LxWxH)
Fowler Bed Electric Product Code: MEF60014 Description Elegant fowler hospital bed specially designed for comfortable recovery of patients with various important positions available as per doctorâ??s requirement with trolley base. Made of strong rectangular crca pipe. Four section top of perforated crca sheets. Back-rest & knee-rest positions obtained by corded remote control. Abs molded head & foot panels. Specially designed collapsible side safety railing. Provided with turning food table. Bed mounted on 125mm. High strength castors with covers, two with brakes. One ss iv rod with foldable four I.V. Hooks. Finish: pre-treated and epoxy powder coated.
Fowler Bed Mechanical Product Code: MEF6008 Description Frame made of strong rectangular CRCA pipe mounted on â??Hâ?? type legs. Four section top of perforated CRCA sheets. Back-rest, knee-rest positions obtained by Crank Mechanism at foot end with separates handles. Head & foot Panels made of Laminated Board fitted with Stainless Steel Pipe Frame. Bed Mounted on Heavy Duty PVC Stumps. Provision for Stainless Steel I.V. Rod with foldable Four I.V hooks on four locations. Pre-Treated and Epoxy Powder Coated. Size: 2200 mm x 1000 mm x 600-800 mm (LxWxH)
Mattress for Hospital Bed Product Code: MEF6106 Description Mattress for Semi fowler bed 4? 32 KG/M3 density foam, cover made for breathable, washable disinfectant, liquid proof and fire proof material. Appreciated for features like attractive color combinations, color fastness, durable stitching and skin soft finish. Polymer Foam with Rexin Cover with Zip at one end. The cover is ultra way stretch , vapour permeable and water resistant with concealed zip. The mattress cover is antimicrobial, bacteriostatic and fungistic and easy to clean and maintain. The cover is marked with turnable guide and washing instructions. Size: 72 x 21 x 4-6 inch
Semi Fowler Bed (St.) Product Code: MEF6014 Description Frame work made of strong and precise rectangular steel tubes with tubular head and foot bows of unequal height with vertical tube supports, mounted on pvc stumps. Top made of perforated crca sheet machine pressed and bent; with mattress guard. Provision for saline rod. Bakcrest section manoeured by screw with folding handle from foot end. 125mm Dia Castor wheels, two with central breaking system and two with steering plus central breaking. Tubular head and foot bows of unequal height supported with one horizontal tube and three vertical tubes supports Finish: pre-treated and hard epoxy powder coated. Capacity: 180kg Size: 2060x900x600mm
Semi-Fowler Bed Mechanical Product Code: MEF60013 Description Frame made of strong rectangular crca pipe with trolley base. Two section top of perforated crca sheets. Back-rest section maneuverable by crank mechanism at foot end. Abs molded head & foot panels. Collapsible side safety railing. Provided with turning food table. Provided with shoe holder with in the trolley. Bed mounted on 125 mm. High strength castors with covers, two with brakes. One SS i.V. Rod with foldable four i.V hooks. Finish: pre-treated and epoxy powder coated.
Pediatric BED Product Code: MEF702 Description Tubular head and foot bows of unequal height with vertical support. Frame made of MS Tubes. Top made of Oval perforated CRCA MS Sheet. Legs fitted ith PVC stumps. Four location for I.V. Rod. Full length rop side rails on both sides. Finish: pretreated and epoxy powder coated. Overall Appro size: 1480Lx840Wx600h in mm Bed frame approx. size: 1370 L x 760 w in mm Optional: Plain Mattress and SS Telescopic IV Rod.
Ward Bed Plain General Product Code: MEF6018 Description Frame work made of strong and precise rectangular steel tubes with tubular head and foot bows of unequal height with vertical tube supports, mounted on pvc stumps. Top made of perforated crca sheet machine pressed and bent; with mattress guard. Provision for saline rod. Finish: pre-treated and epoxy powder coated. Size: 78 L X 36 W X 24 H.
Ward Bed With Backrest On Ratchet Product Code: MEF6019 Description Frame work made of strong and precise steel tubes on h type legs mounted on rubber stumps. Two sections top of perforated crca sheet machine pressed and bent; with mattress guard. Back-rest position by ratchet system. Head & foot panels made of steel pipe frame. Provision for saline rod. Finish: pre-treated and epoxy powder coated. Size: 78 L X 36 W X 24 H.
Examination Couch Product Code: MEF6037 Description made from crca sheet mounted on crca pipe frame. one side front open two shelves and one lockable almirah box with two shelves inside. free space in the middle for easy patient examination. high density 100 mm pu foam mattress top with inbuilt pillow. towel cum disposable paper roll stand at the foot end to maintain high level hygiene. mounted on pvc stumps non-breakable. finish: pre-treated and epoxy powder coated.
Examination Table Product Code: MEF715 Two section cushioned top with head section adjustable on ratchet. Provision for iv rod made of stainless steel provided at the head end. Mounted on pvc stumps. 5cm Foam Cushioned top covered with rexine Finish: pretreated and epoxy powder coated. Size:180x60x81cms
Examination Table General (Three Sections Top) Product Code: MEF701 Description Three section cushioned top with head section adjustable on ratchet. Made of crca sheet and pipes. Leg section adjustable on lever. Leg height adjustable on Knee crutches. Provision for iv rod made of stainless steel provided at the head end. Mounted on pvc stumps. Finish: pretreated and epoxy powder coated.
Examination Table General (Two Sections Top) Product Code: MEF6036 Description Two section top with head section adjustable on ratchet. Made of crca sheet and pipes. Provision for iv rod made of stainless steel provided at the head end. Mounted on pvc stumps. Finish: pretreated and epoxy powder coated.
Examintion Couch Product Code: MEF0135 Description Two Boxes made from both sides Laminated Wood mounted on CRCA pipe frame. Two laminated wood boxes have one detachable shelf fitted with two doors. Each Box with large stainless steel handles. Free space in the middle for easy patient examination and to put foot step for patient. High density 100mm P.U, foam Mattress top with inbuilt Pillow. Couch is mounted on PVC stumps Non-Breakable. Size: Length 76inches, Width 26 Inch, ad Height 32 inch. Finish: Laminated Wooden Box with Pre-treated and Epoxy Powder Coated.
Gyn. /Obstetric Examination Table Product Code: MEF6038 Description Two section top with head section adjustable on ratchet. Made of crca sheet and pipes. Lithotomy leg holders with straps provided at leg end. Iv rod made of stainless steel provided at the head end. Provided with 50 m.m thick high density special pu foam mattress all side covered with high quality heavy duty raxine. Finish: pretreated and epoxy powder coated.
Gynae /Obstetric Examination Couch Product Code: MEF6039 Description Made from crca sheet mounted on crca pipe frame. One side lockable almirah box with two shelves inside. Free space in the amiddle for easy patient examination. specially designed gynae. examination â??uâ?? cut provided with pair of upholstered lithotomy mounted on stainless steel rods. Sliding stainless steel basin/tray provided under the main frame. High density 100 mm pu foam mattress top with inbuilt pillow. Mounted on pvc stumps non-breakable. Finish: pre-treated and epoxy powder coated.
LABOUR & DELIVERY BED Product Code: MEF714 Description Made of two sections, body section with legs cushioned on rubber tips, leg section on swivel castors with brakes. Made of crca sheet and pipes. Leg section can be completely recessed under the body section. Adjustable Leg holder, height can be adjusted with tightening and loosening of screw fitted at bed foot. Filled mattress pad and cover mattress pad with zipper, 2 sections. Made of Corrasion resistant and decontamination pipes Leg height adjustable on Knee crutches. Provision for iv rod made of stainless steel provided at the head end. Fitted with Foam density approx. 21 â?? 25kg/m3 cover mattress pad, Resistant waterproof, washable plastic, flame retardant Dimensions Body section assembled 1000 (L) x 500 (W) x 750 (H)mm. Leg section approx. 30 x 1,5mm, Carrying capacity approx. 150 â?? 180kg, swivel castor approx. 100mm, filled mattress approx. 600 (H) mm Mounted on pvc stumps. Finish: pretreated and epoxy powder coated.
Labour Delivery Bed Pneumatic Product Code: MEF720 Description Movement: Trendelenburg 30 degree max Reverse Trendelenburg: 30 degree max Lateral Tilt: 15 degree Max Height Adjustment: 60 to 110cm Body Section: 60 cm (min) width (w/o arm board) 1000 cm (min) Length ( pelvis to head) Leg Section 60cm (W) 70 cm (L) table top material: gauge 20 stainless steel hydraulically operated with standard accessories: heel holders, shoulder rests side frame, mattress waste receptacle can and hose, supplementary table, funnel built-in IV pole with holder; provided with 4 caster with brake, padded stirrup
