Diameter 0.30 mm to 16.00 mm Material High Carbon Steel Size 0.30 mm to 16.00 mm Surface Finish BLACK & GALVANIZED Coil Weight 10 to 1000 kg
Finished: Hot dip Galvanized. Tension strength: 700-800 N/mm2. Wire diameter: 2.10 mm. Tolerance: + 0.025 mm / - 0.025 mm. Thickness of Zinc coating: 15-17 g/m2. Coil dimensions: inner diam. about 400 mm. Outer diam: 900 mm. Height: 750 mm.
The G I. Wire of 3.15mm dia x 4.00mm dia with tolerance of +or- 2.5 % in dia as per IS:280/1978 with latest amendment/revision if any. Yes 2) The G. I. Wire shall drawn from soft wire having tensile strength 450-550 N/mm2 Yes 3) Breaking Load shall be as under : for G. I. Wire 3.15mm dia x 339.3 to 459.2 for G. I. Wire 4.00 mm dia 544 to 740.54 Yes Yes 4) Zinc coating shall be as under i) Heavy coating IS : 4826/78 ii) How dip galvanizing, weight of zinc coating when tested IS : 4826/79 iii) The quality of zinc shall be as per IS : 209/1992 iv) No. of dip guaranteed. 3 Nos. of 1 minute dips & 1 No. 1/2 minute dip as per IS:2633/1986 Yes Yes Yes
Ungalvanized steel wire rope 6 12 + 7FC, RHRL ( Right Hand Regular Lay), T/S 1770/mm2, according to EN 12385:4, packing in ply wooden reels/1000 meters. Size 6mm, 8mm, 10mm, 12mm, 14mm, 16mm. ... Galvanized Steel Rope. Fiber core RD / mm Weight kg/mm2 /unit 6 Ã?? 19 + 1 13.00 160
Steel wool grades and fiber thickness Steel wool is made by shaving thin layers of steel from wires. Steel wool consists of long and relatively strong shavings with sharp edges.
Diameter 0.30 mm to 16.00 mm Material High Carbon Steel Size 0.30 mm to 16.00 mm Surface Finish BLACK & GALVANIZED Coil Weight 10 to 1000 kg
Standard: ASTM, BS, DIN, GB. Wire Diameter: 4.00mm-12.00mm. ... Prestressed PC Steel Wire. Nominal Diameter, mm(in) Tensile Strength, min, Mpa (psi) Type BA Type WA 6.35(0.250) 1655(240 000) 1655(240 000) 7.01(0.276) 1620(235 000) 1620(235 000)
Jhas 0.8 Mm - 1.2 Mm Sealing Wire Galvanized Steel for Lead Seal. ... 50-100 M Sealing Wire, For Industrial. ... Packing Wire. ... 0.5-5 Mm Golden Sealing Wire, For Industrial, Thickness: 5-20 Mm. ... Jamesmaag 1.26 Mm Sealing Wire. ... Silver 1 Mm Packing Wire. ... NBI Lead Seal. ... Smartpack 15 Mm Sealing Wire, For Construction, Thickness: 1 Mm.
2 Tensile properties of the wire shall be as follows: Tensile strength of galvanized M.S. Wire shall be 300 550 N/mm2. 4.1. 3 Type of coating of galvanise shall be heavy as per IS: 4826 1979 and the wires shall be galvanized after drawing & annealing.
Wire Thickness( 2 Strand wires) : 2.5mm(12SWG) Barb Spacing : 3 to 5inches Length Per KG : 6 Meter /20 Feet Approx Bundle Weight : 25 to 30 KG Length per bundle : Approx 168 Mtr / 550 Feet
Diameter 0.30 mm to 16.00 mm Material High Carbon Steel Size 0.30 mm to 16.00 mm Surface Finish BLACK & GALVANIZED Coil Weight 10 to 1000 kg
2 Tensile properties of the wire shall be as follows: Tensile strength of galvanised M.S. Wire shall be 300 â?? 550 N/mm2. 4.1. 3 Type of coating of galvanise shall be heavy as per IS: 4826 â?? 1979 and the wires shall be galvanised after drawing & annealing.
High Tensile Wire Standard: Both GB/T 20118-2006, DIN, EIPS are available. Nominal tensile strength (Mpa): 1570, 1770, 1870, 1960 etc. Quality control: ISO 9001 etc. High Tensile Wire Diameter: 4 / 4.5 / 4.8 / 5 / 6 / 6.25 / 7 / 8 / 9 / 10 / 12mm. Tolerance: +/-0.05mm. Elongation: 3.5.
Non aloy steel wires
A) Capacity: 24,000 MT And Growing B) Equipment 8-Blocker Straight line machine with PLC control 4-Blocker straight line machine with PLC control Hi speed 40-table annealing furnace-12 m long Inverted vertical wire drawn machine All machines are available with an online clearing and coating facility. PRODUCT SPECIFICATIONS WIRE SIZE RANGE : 1.8 - 8 mm PHYSICAL ATTRIBUTES : Coil ID 300 - 700 mm Coil Weight - 25 - 850 kg FINISH : Bright material TOLERANCE : H9, H10, H11 SUPPLY CONDITION : Soft annealed ¼ hard ½ hard Spring hard Tensile standard / As per customer requirement GRADES : AISI: 201, 202, 204Cu, 301, 302, 303, 304, 304Cu, 304HC, 304L, 304H, 310, 310S, 312, 314, 316, d16L, 316LN, 316Ti, 316LCu, 321, 410, 420, 430, 430L, 904L DIN/EN: 1.4301, 1.4306, 1.4307, 1.4310, 1.4401, 1.4404, 1.4567, 1.4841, 1.4842, 1.4541, 1.4845, 1.4570, 1.4571, 1.4578, 1.4597, 1.4362, 1.4370 and 1.4016 Electrode Grades: ER304, ER304L, ER307, ER307SI, ER308, ER308L, ER308LSi, ER310, ER316, ER316L, ER316LSi, ER347, ER347SI, ER309L, ER430 and ER420 *Specialised grades also available as per customer requirements
A)CAPACITY: 2,20,000 TPA B)EQUIPMENT: Reheating Furnace fully automated with dual fired burner LPG/LDO.s High-pressure De-scaler. 4-Stand Housingless Roughing Mill in horizontal and vertical combination. 10-Stand Housingless Continuous Mill in horizontal/vertical combination with 8 loopers for tension free rolling and 2 shears for end cutting. 4 Cantilever stands in horizontal and vertical combination with Tungsten Carbide (TC) Rings. 10-Stand V-type, no twist wire rod block. Primary cooling line for controlling laying temperature. Laying head. 70 m long cooling conveyor with retarded, forced cooling and online quenching facility. Pallet type coil handling with vertical compactor. Mill fully automated by ABB drive and PLC. Solution Annealing Furnace. Pickling line with Effluent Treatment Plant. Wendt CNC grinding machine for TC Rings PRODUCT SPECIFICATIONS WIRE ROD a. SIZE RANGE : 5.5 - 16 mm (Wire rod block ) COIL WEIGHT : 850 kg COIL DIMENSIONS : ID: 800 - 900 mm OD: 1250 (wire rod block) TOLERANCE : As per EN 10088 SUPPLY CONDITION: Hot rolled (HR Hot rolled + pickled (HRP) b . SIZE RANGE : (Available in mm) 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 11, 12, 13, 14, 15 and 16. COIL WEIGHT : 50 kg, 25 kg SUPPLY CONDITION : Hot rolled + annealed + pickled (HRAP) c . SIZE RANGE : Under commissioning: 17 - 40 mm (garret coiled) GRADES ASTM: 201, 202, 204Cu, 301, 302, 303, 304, 304Cu, 304HC, 304L, 304H, 310, 310S, 312, 314, 316, d16L, 316LN, 316Ti, 316LCu, 321, 410, 420, 430, 430L, 904L DIN/EN: 1.4301, 1.4306, 1.4307, 1.4310, 1.4401, 1.4404, 1.4567, 1.4841, 1.4842, 1.4541, 1.4845, 1.4570, 1.4571, 1.4578, 1.4597, 1.4362, 1.4370 and 1.4016 Electrode Grades: ER304, ER304L, ER307, ER307SI, ER308, ER308L, ER308LSi, ER310, ER316, ER316L, ER316LSi, ER347, ER347SI, ER309L, ER430 and ER420 *Specialised grades also available as per customer requirements
Stainless Steel Wire 316L Carbon: 0.030. Manganese: 2.0. Phosphorus: 0.025. Sulphur: 0.01. Silicon: 0.75. Chromium: 17.0-19.0. Nickel: 13.0-15.5. Molybdenum: 2.0-3.0.
Tyre bead wire is a high carbon metal, radial tyre bead wire is 1.6 mm and nylon tyre bead wire is 1.10mm. Bead with can be used in converting to shot blasting, high tension springs, wire mesh, wire baskets, nails, cutting tools. Since this is extracted from tyres it is available at a very reasonable rates.
Steel tire wire scarp or Tire derived steel (TDS) is a light melting scrap obtained during the shredding process of waste tires. This material is a high quality steel with high carbon content. It is incorporated in the tires structure to withstand bumps, heat and other hazardous conditions.
Steel tire wire scarp or Tire derived steel (TDS) is a light melting scrap obtained during the shredding process of waste tires. This material is a high quality steel with high carbon content. It is incorporated in the tires structure to withstand bumps, heat and other hazardous conditions.
