Smart Morta Care is a chemical admixture which is added to concrete
mixtures to improve work ability and strength by helping the cement to react and cure
completely. Unless the mixture is â??starvedâ?? of water, the strength of concrete is inversely
proportional to the amount of water added or water-cement (w/c) ratio. In order to produce
stronger concrete, less water is to be added, which makes the concrete mixture less workable and difficult to mix, necessitating the use of Smart Morta Care for good work ability.
Cement Concrete Polymer Mix Plus, long life and
maintainance free additive for new plaster, crack repair additive, anti-shrinkage,
high bonding (anti-erosion). Used for Prevention of Seepage and Salinity
High adhesion to old concrete & cement surfaces.
A multi purpose polymer for water proofing,
cladding mortar.
Water proofing base coat for sunken areas.
Water proof.
Acid resistant.
Salt resistant coating.
We, Imperial World Trade Frequently Placed In Ordinary Portland Cement Mortar, Sometimes With A Little Extra Cement Or Some Fireclay Added To Make The Mixture Fireclay Mortar.
A Refractory Composition Comprising Of Heat Resistant Binding System And Low Grain Size Refractory Furnaces. Mostly Used For Joining Bricks. Two Types Of Settings: Air And Heat Setting Mortar The Mortar Hardens At A Heat Above Room Temperature.
The Problem With Using Regular Mortar Is That Portland Cement Can't Take The Heat. Curiously, Cement Retains Its Energy Up To Reasonably High Temperatures But Declines As It Cools Down Through About 600�° F. Ultimately All That Is Left Of The Mortar Is The Sand And Fireclay, With No Cement Binder. The Mortar Has No Strength And Easily Falls Out Of The Joints, Especially If They Are Wide.
Refractory Mortar, On The Opposite Side, Is Performed With High-Temperature Cement And Carefully Selected Aggregates That Don't Expand And Tear The Mortar Apart When Heated. The International Residential Code (IRC) And International Building Code (IBC), Which Were Recently Adopted In Approximately All States And Require That Fireboxes, Smoke Chambers, And Flue Liners Be Laid With Refractory Mortar.
BuildWell Quickbond is a admixture of sand, cement and superior quality polymers. It is a bonding agent
that enables quick preparation of ceiling and RCC wall surface. Also offers the dual benefits of mechanical
and chemical bonding, which eliminates the labor – intensive hacking and reduces debonding losses.
Features :
- Excellent bonding.
- No hacking is required on RCC wall.
- Hence prevention of microcracking and
saving of labor cost.
- Strong chemical and mechanical bond
- Easy to use.
- Works good for Gypsum plaster as well
for cement sand plaster
Benefits :
- Can be easily applied by brush.
- Reduces hacking.
- Time saving.
- Less rebound loss while plastering.
- It is water soluble product hence no
solvent odour.
- Fast drying.
- Improves bonding strength between
RCC wall and Plaster.
56294 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
Step N Riser ( staircase) is most important elements of any structure.
The use of steps is very high and hence ceramic material can't be used.
Where granite and marble have the natural advantage that as much as its getting in used, the shining will not get dull but increasing.
For the projects, we are providing the ready to use steps and riser.
It will be available in customize sizing as per requirements.
The molding and anti slipper lines also getting done.
So just ready to use Step n Riser. ( Staircase). Its will be be done with all granite and marbles.
Wall Putty is completely cement based putty which is white in color. Its use is better for the exterior as well as interior walls of buildings. The white colored cement-based putty binds very strongly with base plaster in such conditions as well when the surface is damp and it forms a good and protective base. The pores (fine one) on ceiling and walls can be easily fills up and gives you a fine even and very smooth and dry surface which is best for painting. Wall putty gives an effective protection against flaking; so it assures you good even, looking smooth walls of your home for so many years.
Features / Advantages:
It is white cement based and skim coated.
For application of paint it gives smooth and water resistant surface.
It has as excellent adhesion.
It causes no peel off because of seepage.
It gives excellent finish, increases the durability of paint, and causes less consumption of paint.
No need of primer.
No kind of curing is required.
Areas of application:
Application can easily applied on plastered surface.
It gives fine finish and it is very useful for Inner and Outer walls.
Surface Preparation and Application
Before applying wall putty makes sure that the surface is free from dust or not, if not make it dust free. Also make sure that it is free from any type of fungus, greases, bitumen, and any kind of release agents, moss, paints, oils, loose particles or any kind of coating. Make sure that the surface should be free from all the above mentioned impurities otherwise it affects the workability of wall putty.
Before applying make sure that the surface where the putty is supposed to be applied should be pre-wetted. This will helps you to provide a very strong bond with the substrate.
Its better to apply at least two coats of Addage Wall Putty on plastered surface of wall (Each coat should be Max 1.5 mm of total thickness).
Coverage
The Addage Wall Putty covers almost more surface area that is exceeding to 9-10 Sq. ft. /kg. In two coats on new plastered wall.
Product description
We are offering a wide array of pvc doors that caters to all kinds of customer's requirements like exquisite pvc doors in bedroom, pooja room, bathroom and kitchen. The contemporary collections of pvc folding doors are available.
Thickness 6mm to 45 mm
Colour any
Features
Low maintenance
Attractive design
Long lasting life
Dr. Wall Care Tile grouting is the process of filling the spaces in between tiles. It is high polymerized cementitious (in powder form) which requires addition of water to the powder to get a perfect product. A smooth surface gives a strong bonding with tiles. It is non porous, stain resistant, non shrink, water resistant, for interior & exterior use demonstrates an excellent water repellent property, suitable for joint width 1-4mm
Dr. Wall Care Stone Sealer is a siloxane penetrating sealer designed specifically for the treatment of Natural Stone surfaces. Sealer protects Natural Stone surfaces from exterior exposure and weathering. It is specially formulated sealer which penetrates deep into the surface pores, reacts chemically to provide a durable and long lasting barrier against water and salt intrusion. This level of protection can substantially reduce the damaging effects of freeze/thaw cycling, precipitation, acid rain, efflorescence and dust/dirt degradations.
Dr. Wall Care Weather Guard is a siloxane penetrating sealant designed specifically for the treatment of masonry materials and concrete surfaces. It protects concrete and masonry surfaces from the effects of exterior exposure and weathering. In all, it penetrates deep into the surface pores and reacts chemically to provide a durable, long lasting barrier against water and salt intrusion. This level of protection can substantially reduce the damaging effects of freeze/thaw cycling, precipitation, acid rain, efflorescence, and dust/dirt degradation. It preserves the natural appearance without membrane build-up
Tile & Stone Adhesive is a factory-made specially formulated polymer modified cementitious dry powder that is mixed with water or polymer additive to form a consistent paste for problem-free tile installation. Adhesive is used to stick tiles & Stones to surfaces. Tiling adhesive needs to be strong when fixing tiles� to ensure they don't slip and smash and become unsafe.
Arkin synthetic Roof underlayment offers effective secondary protection for roofs and acts as a strong barrier against rains, moisture and cold winds. Its anti-slippery layer, high tear resistance and UV protection coating ensure damage-proof, crack-free and easy installation even on long exposure to sunlight
Features & Benefits :
Effective protection from extreme
weather conditions
Water and moisture resistance
Lightweight, strong and durable
Anti-slip texture
UV Protection
Easy installation due to nail
placement marks
Wrinkle/buckle-proof
Eco-friendly & recyclable material
High performance & Low Cost Insulation Solution
Carmika high performance insulation material crafted using Polypropylene and Aluminum foil.
PP air pockets works as thermal barrier and aluminum foil layers work as radiant heat reflector
make Carmikavery efficient insulation material. Unique properties of Carmikaprovide High
Strength tear resistance water proof and Fire Retarded and has very long life.
Features & Benefits :
- Easy to Install using Nails, Screws or Adhesive
- Cuts in required shape
- UV resistance
- Water proof
- Fire retarded
- Moisture & Mold resistance
- Rodent resistance
- High tear resistance
- Minimum Safety gear require for Installation High thermal R Value
Home Insulation
Roof: CamrikaSFL with Single foil layer is ideal roof insulation specially for warmer climate,
Carmikasheet can be nailed or screwed with wooden frame, Keeping foil side toward sky. It
reflects 97% Outside heat radiation keeping home cooler. Carmikais act as excellent thermal
barrier as well in cold days it keep home warmer. Multiple layers of Carmikasheet also placed
for much higher results.
Loft floor: On loft floor Carmikasheet can be installed with Nails or Screws on joists , place
foil side facing bottom. In Winter days Carmikawill reflect heat back to house keeping to
warmer and in Summer days. For much higher Insulation multiple layer of sheet can be placed
together.
Walls & Basement: CarmikaWFL is ideal for Walls and basement insulation, Carmikasheet
is only 4mm thick and can be easily placed between walls and Floor, Camika WLF has very
low thermal conductivity works as excellent insulation.
"Radiant barriers or reflective barriers inhibit heat transfer by thermal radiation. Thermal energy may also be transferred via conduction or convection, however, radiant barriers do not necessarily protect against heat transfer via conduction or convection.."
Following benefits Characteristics:
Based on reflection means low emissivity (blocks heat and moisture)
Reflects most of radiation heat (blocks 97% of radiation heat)
Light Weight, no degradation, lasts life long
Easy and fast installation, No spacers required
Environment friendly - Non-toxic / non-carcinogenic
No Wire mesh needed, saves time and money
Cost-effective and versatile.
Easy to install
Fibre-Free
Class A / Class 1 Fire Rating
Inhibits condensation
Resists growth of fungi, mold and mildew
Does not compress, collapse or disintegrate
Lowers heating and cooling costs year-round
Vapor and radon retarder
Not affected by moisture or humidity
ISO 9001:2015Manufacturing location
Our range of Reflective Insulation Materials products include Patidar Manufactured Radiant Barriers or Reflective Barriers such as Woven Sack Lamination With Aluminium Foil, Aluminium Foil - Metalized Film Laminated Non Woven Fabrics, Foil Kraft Insulation Finish, Insulation Aluminium Foil Coated Fiberglass Cloth and Metalized Laminated With Woven Fabrics, Which Used in Below application:
Roof Insulation
Foil Insulation for Cold Chain supply
Pre Engineered Building Insulation
Thermal Insulation
Fibreglass Insulations
Under Roof Insulation
Foil Wrap Insulation
Aluminium Foil Insulation
Home Insulation
Metal Building Insulations materials
Reflective Barrier film
Reflective Insulation Material
Heat Insulation Material
Radiant Barrier FOIL
HVAC Insulation
Livestock Insulation Materials
Farming Insulation
Poultry Farm Insulation
Mobile House Insulation
Building Insulation
Factory Shed Insulations
Insulated Foil For Export Packaging
56294 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
